diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index df0fca754424d6..775e64a6cad9ac 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -60,7 +60,8 @@ ipq40xx_setup_interfaces() mikrotik,sxtsq-5-ac|\ netgear,ex6100v2|\ netgear,ex6150v2|\ - zte,mf282plus) + zte,mf282plus|\ + huawei,ap4050dn) ucidef_set_interface_lan "lan" ;; avm,fritzbox-7530) diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-ap4050dn.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-ap4050dn.dts index c917e70c69033d..d6151890770d95 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-ap4050dn.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-ap4050dn.dts @@ -19,6 +19,11 @@ status = "okay"; }; + counter@4a1000 { + compatible = "qcom,qca-gcnt"; + reg = <0x4a1000 0x4>; + }; + tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; @@ -53,6 +58,23 @@ hw_margin_ms = <100>; always-running; }; + + virtual_flash { + compatible = "mtd-concat"; + devices = <&fwconcat0 &fwconcat1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x3200000>; + compatible = "openwrt,uimage", "denx,uimage"; + }; + }; + }; }; &tlmm { @@ -191,8 +213,9 @@ reg = <0x600000 0x100000>; }; - partition@700000 { - label = "SysImageA"; + // In the vendor layout, the partion "SysImageA" lies here + fwconcat0: partition@700000 { + label = "fwconcat0"; reg = <0x700000 0x1900000>; }; @@ -246,8 +269,9 @@ reg = <0x2600000 0x100000>; }; - partition@2700000 { - label = "SysImageB"; + // In the vendor layout, the partion "SysImageB" lies here + fwconcat1: partition@2700000 { + label = "fwconcat1"; reg = <0x2700000 0x1900000>; }; }; @@ -262,7 +286,7 @@ &wifi0 { status = "okay"; - qcom,ath10k-calibration-variant = "Huawei-AP4050DN"; + //qcom,ath10k-calibration-variant = "Huawei-AP4050DN"; nvmem-cell-names = "pre-calibration"; nvmem-cells = <&precal_art_1000>; @@ -270,7 +294,7 @@ &wifi1 { status = "okay"; - qcom,ath10k-calibration-variant = "Huawei-AP4050DN"; + //qcom,ath10k-calibration-variant = "Huawei-AP4050DN"; nvmem-cell-names = "pre-calibration"; nvmem-cells = <&precal_art_5000>; @@ -288,34 +312,11 @@ status = "okay"; }; -&swport1 { +&switch { status = "okay"; - label = "ethernet1"; -}; - -&swport2 { - status = "okay"; - label = "ethernet2"; -}; - -&swport3 { - status = "okay"; - label = "ethernet3"; }; &swport4 { status = "okay"; - label = "ethernet4"; + label = "lan"; }; - -&swport5 { - status = "okay"; - label = "ethernet5"; -}; - - - - -// &switch { -// status = "okay"; -// };