Skip to content

Latest commit

 

History

History
157 lines (106 loc) · 5.77 KB

POSTINSTALL-README.md

File metadata and controls

157 lines (106 loc) · 5.77 KB
Raw

secureblue

After rebasing to secureblue, follow the following steps in order.

Subscribe to secureblue release notifications

FAQ

Nvidia

If you are using an nvidia image, run this after installation:

rpm-ostree kargs \
    --append-if-missing=rd.driver.blacklist=nouveau \
    --append-if-missing=modprobe.blacklist=nouveau \
    --append-if-missing=nvidia-drm.modeset=1 \
    --append-if-missing=nvidia-drm.fbdev=1

You may also need this (solves flickering and luks issues on some nvidia hardware):

rpm-ostree kargs \
    --append-if-missing=initcall_blacklist=simpledrm_platform_driver_init

Nvidia optimus laptop

If you are using an nvidia image on an optimus laptop, run this after installation:

ujust configure-nvidia-optimus

Enroll secureboot key

ujust enroll-secure-boot-key

Set hardened kargs

Note

Learn about the hardening applied by the kargs set by the command below here.

ujust set-kargs-hardening

This command applies a fixed set of hardened boot parameters, and asks you whether or not the following kargs should also be set along with those (all of which are documented in the link above):

32-bit support

If you answer N, or press enter without any input, support for 32-bit programs will be disabled on the next boot. If you run exclusively modern software, chances are likely you don't need this, so it's safe to disable for additional attack surface reduction.

However, there are certain exceptions. A couple common usecases are if you need Steam, or run an ocassional application in Wine you'll likely want to keep support for 32-bit programs. If this is the case, answer Y.

Force disable simultaneous multithreading

If you answer Y when prompted, simultaneous multithreading (SMT, often called Hyperthreading) will be disabled on all hardware, regardless of known vulnerabilities. This can cause a reduction in the performance of certain tasks in favor of security.

Unstable hardening kargs

If you answer Y when prompted, unstable hardening kargs will be additionally applied, which can cause issues on some hardware, but are stable on other hardware.

Setup USBGuard

This will generate a policy based on your currently attached USB devices and block all others, then enable usbguard.

ujust setup-usbguard

GRUB

Set a password

Setting a GRUB password helps protect the device from physical tampering and mitigates various attack vectors, such as booting from malicious media devices and changing boot or kernel parameters.

To set a GRUB password, use the following command. By default, the password will be required when modifying boot entries, but not when booting existing entries.

sudo grub2-setpassword

GRUB will prompt for a username and password. The default username is root.

If you wish to password-protect booting existing entries, you can add the grub_users root entry in the specific configuration file located in the /boot/loader/entries directory.

Create a separate wheel account for admin purposes

Creating a dedicated wheel user and removing wheel from your primary user helps prevent certain attack vectors, like:

Caution

If you do these steps out of order, it is possible to end up without the ability to administrate your system. You will not be able to use the traditional GRUB-based method of fixing mistakes like this, either, as this will leave your system in a broken state. However, simply rolling back to an older snapshot of your system, should resolve the problem.

  1. run0
  2. adduser admin
  3. usermod -aG wheel admin
  4. passwd admin
  5. exit
  6. reboot

Note

We log in as admin to do the final step of removing the user account's wheel privileges in order to make the operation of removing those privileges depend on having access to your admin account, and the admin account functioning correctly first.

  1. Log in as admin
  2. run0 gpasswd -d {your username here} wheel
  3. reboot

When using a non-wheel user, you can add the user to other groups if you want. For example:

  • use libvirt: libvirt
  • use adb and fastboot: plugdev
  • use systemwide flatpaks: flatpak

Setup system DNS

Interactively setup system DNS resolution for systemd-resolved (optionally also set the resolver for hardened-chromium via management policy):

ujust dns-selector

NOTE: If you intend to use a VPN, use the system default state (network provided resolver). This will ensure your system uses the VPN provided DNS resolver to prevent DNS leaks. ESPECIALLY avoid setting the browser DNS policy in this case.

Bash environment lockdown

To mitigate LD_PRELOAD attacks, run:

ujust toggle-bash-environment-lockdown

LUKS TPM2 Unlock

Warning

Do not use this if you have an AMD CPU.

To enable TPM2 LUKS unlocking, run:

ujust setup-luks-tpm-unlock

Type Y when asked if you want to set a PIN.

Validation

To validate your secureblue setup, run:

ujust audit-secureblue

Optional: hardened-chromium Flags

The included hardened-chromium browser has some additional settings in chrome://flags you may want to set for additional hardening and convenience (can cause functionality issues in some cases). You can read about these settings here.

Read the FAQ

Lots of important stuff is covered in the FAQ. AppImage toggles, GNOME extension toggles, Xwayland toggles, etc.