tx_ultimate_03_ingresso_mansarda.yaml

substitutions:
  name: "interruttore-ingresso-mansarda"
  friendly_name: "Ingresso mansarda"

  use_ip_address: 192.168.2.143 # Usato da esphome per monitor e upload

  wifi_ssid: !secret wifi_dmz_ssid
  wifi_password: !secret wifi_dmz_password

#esp32_ble_tracker:
#  scan_parameters:
#    active: True
#    continuous: false

packages:
  # Connessione MQTT
  mqtt_client: !include includes/mqtt_client.yaml

  # Configurazione di base
  device_base: !include includes/tx_ultimate_base.yaml

  # Configurazione leds
  leds: !include includes/tx_ultimate_leds_4_zone.yaml

  # Configurazione Custom multitouch
  multitouch: !include includes/tx_ultimate_custom_multitouch.yaml

  # Relè e luci locali
  light_1: !include
    file: includes/tx_ultimate_light.yaml
    vars:
      id: relay_1
      relay_index: 0
      name: "Scale"
      pin: ${relay_2_pin}

  light_2: !include
    file: includes/tx_ultimate_light.yaml
    vars:
      id: relay_2
      relay_index: 1
      name: "Ingresso mansarda"
      pin: ${relay_1_pin}
  light_3: !include
    file: includes/tx_ultimate_mqtt_relay.yaml
    vars:
      id: relay_3
      relay_index: 2
      subscribe_topic: "interruttore-saletta-mansarda/light/sala_mansarda/state"
      value_on: "ON"
      mqtt_json_key: "state"
      command_topic: "interruttore-saletta-mansarda/light/sala_mansarda/command"
      command_toggle: "{ \"state\": \"TOGGLE\" }"
  light_4: !include
    file: includes/tx_ultimate_mqtt_relay.yaml
    vars:
      id: relay_4
      relay_index: 3
      subscribe_topic: "interruttore-saletta-mansarda/light/saletta_mansarda/state"
      value_on: "ON"
      mqtt_json_key: "state"
      command_topic: "interruttore-saletta-mansarda/light/saletta_mansarda/command"
      command_toggle: "{ \"state\": \"TOGGLE\" }"

switch:
  - platform: gpio
    id: gpio_shutter_open
    pin: ${relay_3_pin}
    internal: True
    interlock: &interlock_group [gpio_shutter_close, gpio_shutter_open]
    restore_mode: ALWAYS_OFF
  - platform: gpio
    id: gpio_shutter_close
    pin: ${relay_4_pin}
    internal: True
    interlock: *interlock_group
    restore_mode: ALWAYS_OFF

cover:
  - platform: time_based
    name: "Vasistas"
    id: vasistas

    open_action:
      - switch.turn_on: gpio_shutter_open
    open_duration: 27s

    close_action:
      - switch.turn_on: gpio_shutter_close
    close_duration: 27s

    stop_action:
      - switch.turn_off: gpio_shutter_close
      - switch.turn_off: gpio_shutter_open

script:
  - id: !extend on_release
    then:
      - if:
          condition:
            lambda: "return index == 0;"
          then:
            - light.toggle: relay_1
          else:
            - if:
                condition:
                  lambda: "return index == 1;"
                then:
                  - light.toggle: relay_2
                else:
                  - if:
                      condition:
                        lambda: "return index == 2;"
                      then:
                        - script.execute: mqtt_toggle_relay_3
                      else:
                        - script.execute: mqtt_toggle_relay_4

  - id: !extend on_swipe_right
    then:
      - if:
          condition:
            lambda: 'return id(vasistas).current_operation == CoverOperation::COVER_OPERATION_IDLE;'
          then:
            - cover.open: vasistas
          else:
            - cover.stop: vasistas
  - id: !extend on_swipe_left
    then:
      - if:
          condition:
            lambda: 'return id(vasistas).current_operation == CoverOperation::COVER_OPERATION_IDLE;'
          then:
            - cover.close: vasistas
          else:
            - cover.stop: vasistas

sensor:
  - platform: mqtt_subscribe
    id: vasistas_mqtt
    internal: True
    topic: interruttore-ingresso-mansarda/vasistas/open
    on_value:
      - if:
          condition:
            lambda: 'return id(vasistas).current_operation == CoverOperation::COVER_OPERATION_IDLE;'
          then:
            - if:
                condition:
                  lambda: 'return x > 0;'
                then:
                  - cover.open: vasistas
                else:
                  - cover.close: vasistas
          else:
            - cover.stop: vasistas