Erlando is a set of syntax extensions for Erlang. Currently it consists of three syntax extensions, all of which take the form of parse-transformers.
-
Cut: This adds support for cuts to Erlang. These are inspired by the Scheme form of cuts. Cuts can be thought of as a light-weight form of abstraction, with similarities to partial application (or currying).
-
Do: This adds support for do-syntax and monads to Erlang. These are heavily inspired by Haskell, and the monads and libraries are near-mechanical translations from the Haskell GHC libraries.
-
Import As: This adds support for importing remote functions to the current module namespace with explicit control of the local function names.
To use any of these parse-transformers, you must add the necessary
-compile attributes to your Erlang source files. For example:
-module(test).
-compile({parse_transform, cut}).
-compile({parse_transform, do}).
-compile({parse_transform, import_as}).
...
Then, when compiling test.erl, you must ensure erlc can locate
cut.beam or do.beam or import_as.beam by passing the suitable
path to erlc with a -pa or -pz argument. For example:
erlc -Wall +debug_info -I ./include -pa ebin -o ebin src/cut.erl
erlc -Wall +debug_info -I ./include -pa ebin -o ebin src/do.erl
erlc -Wall +debug_info -I ./include -pa ebin -o ebin src/import_as.erl
erlc -Wall +debug_info -I ./include -pa test/ebin -pa ./ebin -o test/ebin test/src/test.erl
Note: If you're using QLC, you may find you need to be careful as to
the placement of the parse-transformer attributes. For example, I've
found that -compile({parse_transform, cut}). must occur before
-include_lib("stdlib/include/qlc.hrl").
The cut parse-transformer is motivated by the frequency with which simple
function abstractions are used in Erlang, and the relatively noisy
nature of declaring funs. For example, it's quite common to see code
like:
with_resource(Resource, Fun) ->
case lookup_resource(Resource) of
{ok, R} -> Fun(R);
{error, _} = Err -> Err
end.
my_fun(A, B, C) ->
with_resource(A, fun (Resource) ->
my_resource_modification(Resource, B, C)
end).
That is, a fun is created in order to perform variable capture
from the surrounding scope but to leave holes for further
arguments to be provided. Using a cut, the function my_fun can be
rewritten as:
my_fun(A, B, C) ->
with_resource(A, my_resource_modification(_, B, C)).
Normally, the variable _ can only occur in patterns: that is, where a
match occurs. This can be in assignment, in cases, and in function
heads. For example:
{_, bar} = {foo, bar}.
Cut uses _ in expressions to indicate where abstraction should
occur. Abstraction from cuts is always performed on the
shallowest enclosing expression. For example:
list_to_binary([1, 2, math:pow(2, _)]).
will create the expression
list_to_binary([1, 2, fun (X) -> math:pow(2, X) end]).
and not
fun (X) -> list_to_binary([1, 2, math:pow(2, X)]) end.
It is fine to use multiple cuts in the same expression, and the
arguments to the created abstraction will match the order in which the
_ var is found in the expression. For example:
assert_sum_3(X, Y, Z, Sum) when X + Y + Z == Sum -> ok;
assert_sum_3(_X, _Y, _Z, _Sum) -> {error, not_sum}.
test() ->
Equals12 = assert_sum_3(_, _, _, 12),
ok = Equals12(9, 2, 1).
It is perfectly legal to take cuts of cuts as the abstraction created
by the cut is a normal fun expression and thus can be re-cut as
necessary:
test() ->
Equals12 = assert_sum_3(_, _, _, 12),
Equals5 = Equals12(_, _, 7),
ok = Equals5(2, 3).
Note that because a simple fun is being constructed by the cut, the
arguments are evaluated prior to the cut function. For example:
f1(_, _) -> io:format("in f1~n").
test() ->
F = f1(io:format("test line 1~n"), _),
F(io:format("test line 2~n")).
will print out
test line 2
test line 1
in f1
This is because the cut creates fun (X) -> f1(io:format("test line 1~n"), X) end. Thus it is clear that X must be evaluated first,
before the fun can be invoked.
Of course, no one would be crazy enough to have side-effects in function argument expressions, so this will never cause any issues!
Cuts are not limited to function calls. They can be used in any expression where they make sense:
F = {_, 3},
{a, 3} = F(a).
dbl_cons(List) -> [_, _ | List].
test() ->
F = dbl_cons([33]),
[7, 8, 33] = F(7, 8).
Note that if you nest a list as a list tail in Erlang, it's still treated as one expression. For example:
A = [a, b | [c, d | [e]]]
is exactly the same (right from the Erlang parser onwards) as:
A = [a, b, c, d, e]
That is, those sub-lists, when they're in the tail position, do not form sub-expressions. Thus:
F = [1, _, _, [_], 5 | [6, [_] | [_]]],
%% This is the same as:
%% [1, _, _, [_], 5, 6, [_], _]
[1, 2, 3, G, 5, 6, H, 8] = F(2, 3, 8),
[4] = G(4),
[7] = H(7).
However, be very clear about the difference between , and |: the
tail of a list is only defined following a |. Following a ,,
you're just defining another list element.
F = [_, [_]],
%% This is **not** the same as [_, _] or its synonym: [_ | [_]]
[a, G] = F(a),
[b] = G(b).
-record(vector, { x, y, z }).
test() ->
GetZ = _#vector.z,
7 = GetZ(#vector { z = 7 }),
SetX = _#vector{x = _},
V = #vector{ x = 5, y = 4 } = SetX(#vector{ y = 4 }, 5).
F = case _ of
N when is_integer(N) -> N + N;
N -> N
end,
10 = F(5),
ok = F(ok).
See test_cut.erl for more examples, including the use of cuts in list comprehensions and binary construction.
Note that cuts are not allowed where the result of the cut can only be useful by interacting with the evaluation scope. For example:
F = begin _, _, _ end.
This is not allowed, because the arguments to F would have to be
evaluated before the invocation of its body, which would then have no
effect, as they're already fully evaluated by that point.
The do parse-transformer permits Haskell-style do-notation in Erlang, which makes using monads, and monad transformers possible and easy. (Without do-notation, monads tend to look like a lot of line noise.)
What follows is a brief and mechanical introduction to monads. It differs from a lot of the Haskell monad tutorials, because they tend to view monads as a means of achieving sequencing of operations in Haskell, which is challenging because Haskell is a lazy language. Erlang is not a lazy language, but the abstractions possible from using monads are still worthwhile.
Let's say we have the three lines of code:
A = foo(),
B = bar(A, dog),
ok.
They are three, simple statements, which are evaluated consecutively. What a monad gives you is control over what happens between the statements: in Erlang, it is a programmatic comma.
If you wanted to implement a programmatic comma, how would you do it? You might start with something like:
A = foo(),
comma(),
B = bar(A, dog),
comma(),
ok.
But that's not quite powerful enough, because unless comma/0 throws
some sort of exception, it can't actually stop the subsequent
expression from being evaluated. Most of the time we'd probably like
the comma/0 function to be able to act on some variables which are
currently in scope, and that's not possible here either. So we should
extend the function comma/0 so that it takes the result of the
preceding expression, and can choose whether or not the subsequent
expressions should be evaluated:
comma(foo(),
fun (A) -> comma(bar(A, dog),
fun (B) -> ok end)
end).
Thus the function comma/2 takes all results from the previous
expression, and controls how and whether they are passed to the next
expression.
As defined, the comma/2 function is the monadic function '>>='/2.
Now it's pretty difficult to read the program with the comma/2
function (especially as Erlang annoyingly doesn't allow us to define
new infix functions), which is why some special syntax is
desirable. Haskell has its do-notation, and so we've borrowed from
that and abused Erlang's list comprehensions. Haskell also has lovely
type-classes, which we've sort of faked specifically for monads. So,
with the do parse-transformer, you can write in Erlang:
do([Monad ||
A <- foo(),
B <- bar(A, dog),
ok]).
which is readable and straightforward, and this is transformed into:
Monad:'>>='(foo(),
fun (A) -> Monad:'>>='(bar(A, dog),
fun (B) -> ok end)
end).
There is no intention that this latter form is any more readable than
the comma/2 form - it is not. However, it should be clear that the
function Monad:'>>='/2 now has complete control over what happens:
whether the fun on the right hand side ever gets invoked (and how often);
and if so, with what parameter values.
So now that we have some relatively nice syntax for using monads, what can we do with them? Also, in the code
do([Monad ||
A <- foo(),
B <- bar(A, dog),
ok]).
what are the possible values of Monad?
The answer to the former question is almost anything; and to the latter question, is any module name that implements the monad behaviour.
Above, we covered one of the three monadic operators, '>>='/2. The
others are:
-
return/1: This lifts a value into the monad. We'll see examples of this shortly. -
fail/1: This takes a term describing the error encountered, and informs whichever monad currently in use that some sort of error has occurred.
Note that within do-notation, any function call to functions named
return or fail, are automatically rewritten to invoke return or
fail within the current monad.
Some people familiar with Haskell's monads may be expecting to see a fourth operator,
'>>'/2. Interestingly, it turns out that you can't implement'>>'/2in a strict language unless all your monad types are built on functions. This is because in a strict language, arguments to functions are evaluated before the function is invoked. For'>>='/2, the second argument is only reduced to a function prior to invocation of'>>='/2. But the second argument to'>>'/2is not a function, and so in strict languages, will be fully reduced prior to'>>'/2being invoked. This is problematic because the'>>'/2operator is meant to be in control of whether or not subsequent expressions are evaluated. The only solution here would be to make the basic monad type a function, which would then mean that the second argument to'>>='/2would become a function to a function to a result!
However, it is required that
'>>'(A, B)behaves identically to'>>='(A, fun (_) -> B end), and so that is what we do: whenever we come to ado([Monad || A, B ]), we rewrite it to'>>='(A, fun (_) -> B end)rather than'>>'(A, B). There is no'>>'/2operator in our Erlang monads.
The simplest monad possible is the Identity-monad:
-module(identity_m).
-behaviour(monad).
-export(['>>='/2, return/1, fail/1]).
'>>='(X, Fun) -> Fun(X).
return(X) -> X.
fail(X) -> throw({error, X}).
This makes our programmatic comma behave just like Erlang's comma
normally does. The bind operator (that's the Haskell term for the
'>>='/2 monadic operator) does not inspect the
values passed to it, and always invokes the subsequent expression function.
What could we do if we did inspect the values passed to the sequencing combinators? One possibility results in the Maybe-monad:
-module(maybe_m).
-behaviour(monad).
-export(['>>='/2, return/1, fail/1]).
'>>='({just, X}, Fun) -> Fun(X);
'>>='(nothing, _Fun) -> nothing.
return(X) -> {just, X}.
fail(_X) -> nothing.
Thus if the result of the preceding expression is nothing, the
subsequent expressions are not evaluated. This means that we can write
very neat looking code which immediately stops should any failure be
encountered.
if_safe_div_zero(X, Y, Fun) ->
do([maybe_m ||
Result <- case Y == 0 of
true -> fail("Cannot divide by zero");
false -> return(X / Y)
end,
return(Fun(Result))]).
If Y is equal to 0, then Fun will not be invoked, and the result
of the if_safe_div_zero function call will be nothing. If Y is
not equal to 0, then the result of the if_safe_div_zero function
call will be {just, Fun(X / Y)}.
We see here that within the do-block, there is no mention of nothing
or just: they are abstracted away by the Maybe-monad. As a result,
it is possible to change the monad in use, without having to rewrite
any further code.
One common place to use a monad like the Maybe-monad is where you'd otherwise have a lot of nested case statements in order to detect errors. For example:
write_file(Path, Data, Modes) ->
Modes1 = [binary, write | (Modes -- [binary, write])],
case make_binary(Data) of
Bin when is_binary(Bin) ->
case file:open(Path, Modes1) of
{ok, Hdl} ->
case file:write(Hdl, Bin) of
ok ->
case file:sync(Hdl) of
ok ->
file:close(Hdl);
{error, _} = E ->
file:close(Hdl),
E
end;
{error, _} = E ->
file:close(Hdl),
E
end;
{error, _} = E -> E
end;
{error, _} = E -> E
end.
make_binary(Bin) when is_binary(Bin) ->
Bin;
make_binary(List) ->
try
iolist_to_binary(List)
catch error:Reason ->
{error, Reason}
end.
can be transformed into the much shorter
write_file(Path, Data, Modes) ->
Modes1 = [binary, write | (Modes -- [binary, write])],
do([error_m ||
Bin <- make_binary(Data),
Hdl <- file:open(Path, Modes1),
Result <- return(do([error_m ||
file:write(Hdl, Bin),
file:sync(Hdl)])),
file:close(Hdl),
Result]).
make_binary(Bin) when is_binary(Bin) ->
error_m:return(Bin);
make_binary(List) ->
try
error_m:return(iolist_to_binary(List))
catch error:Reason ->
error_m:fail(Reason)
end.
Note that we have a nested do-block so, as with the non-monadic
code, we ensure that once the file is opened, we always call
file:close/1 even if an error occurs in a subsequent operation. This
is achieved by wrapping the nested do-block with a return/1 call:
even if the inner do-block errors, the error is lifted to a
non-error value in the outer do-block, and thus execution continues to
the subsequent file:close/1 call.
Here we are using an Error-monad which is remarkably similar to the
Maybe-monad, but matches the typical Erlang practice of indicating
errors by an {error, Reason} tuple:
-module(error_m).
-behaviour(monad).
-export(['>>='/2, return/1, fail/1]).
'>>='({error, _Err} = Error, _Fun) -> Error;
'>>='({ok, Result}, Fun) -> Fun(Result);
'>>='(ok, Fun) -> Fun(ok).
return(X) -> {ok, X}.
fail(X) -> {error, X}.
Monads can be nested by having do-blocks inside do-blocks, and parameterized by defining a monad as a transformation of another, inner, monad. The State Transform is a very commonly used monad transformer, and is especially relevant for Erlang. Because Erlang is a single-assignment language, it's very common to end up with a lot of code that incrementally numbers variables:
State1 = init(Dimensions),
State2 = plant_seeds(SeedCount, State1),
{DidFlood, State3} = pour_on_water(WaterVolume, State2),
State4 = apply_sunlight(Time, State3),
{DidFlood2, State5} = pour_on_water(WaterVolume, State4),
{Crop, State6} = harvest(State5),
...
This is doubly annoying, not only because it looks awful, but also
because you have to re-number many variables and references whenever a
line is added or removed. Wouldn't it be nice if we could abstract out the
State? We could then have a monad encapsulate the state and provide
it to (and collect it from) the functions we wish to run.
Our implementation of monad-transformers (like State) uses a "hidden feature" of the Erlang distribution called parameterized modules. These are described in Parameterized Modules in Erlang.
The State-transform can be applied to any monad. If we apply it to the
Identity-monad then we get what we're looking for. The key extra
functionality that the State transformer provides us with is the
ability to get and set (or just plain modify) state from within
the inner monad. If we use both the do and cut parse-transformers, we
can write:
StateT = state_t:new(identity_m),
SM = StateT:modify(_),
SMR = StateT:modify_and_return(_),
StateT:exec(
do([StateT ||
StateT:put(init(Dimensions)),
SM(plant_seeds(SeedCount, _)),
DidFlood <- SMR(pour_on_water(WaterVolume, _)),
SM(apply_sunlight(Time, _)),
DidFlood2 <- SMR(pour_on_water(WaterVolume, _)),
Crop <- SMR(harvest(_)),
...
]), undefined).
We began by creating a State-transform over the Identity-monad:
StateT = state_t:new(identity_m),
...
This is the syntax for instantiating parameterized modules.
StateTis a variable referencing a module instance which, in this case, is a monad.
and we define two shorthands for running functions that either just modify the state, or modify the state and return a result:
SM = StateT:modify(_),
SMR = StateT:modify_and_return(_),
...
There's a bit of bookkeeping required but we achieve our goal: there are no
state variables now to renumber whenever we make a change. We used cuts
to leave holes in the functions where State should be fed in; and we
obeyed the protocol that if a function returns both a result and a state, it
is in the form of a {Result, State} tuple. The State-transform does the rest.
There are some standard monad functions such as join/2 and
sequence/2 available in the monad module. We have also implemented
monad_plus which works for monads where there's an obvious sense of
zero and plus (currently Maybe-monad, List-monad, and Omega-monad).
The associated functions guard, msum and mfilter are available
in the monad_plus module.
In many cases, a fairly mechanical translation from Haskell to Erlang is possible, so converting other monads or combinators should mostly be straightforward. However, the lack of type classes in Erlang is limiting.
For cosmetic reasons, it is sometimes desirable to import a remote
function into the current module's namespace. This eliminates the need
to continuously prefix calls to that function with its module
name. Erlang can already do this by using the
-import attribute.
However, this always uses the same function name locally as remotely
which can either lead to misleading function names or even
collisions. Consider, for example, wishing to import length
functions from two remote modules. Aliasing of the functions is one
solution to this.
For example:
-import_as({lists, [{duplicate/2, dup}]}).
test() ->
[a, a, a, a] = dup(4, a).
As with -import, the left of the tuple is the module name, but the
right of the tuple is a list of pairs, with the left being the
function to import from the module (including arity) and the right
being the local name by which the function is to be known--the
alias. The implementation creates a local function, so the alias is
safe to use in, for example, Var = fun dup/2 expressions.
(The MPL)
Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License.
The Original Code is Erlando.
The Initial Developer of the Original Code is VMware, Inc. Copyright (c) 2011-2013 VMware, Inc. All rights reserved.