In gazebo_motor_model.cpp , what is the unit for the motor_constant and where is the moment calculated?

[mariam0amin]

in this line of code -----> ignition::math::Vector3d drag_torque(0, 0, -turning_direction_ * force * moment_constant_);
is this the calculation for the moment? and if it is, how is it force* moment constant? does this mean moment constant unit is meters??
Thanks in advance

[JohnTGZ]

Based on these notes which try to explain the gazebo parameters for the motor model, you might actually be right.

[mariam0amin]

@JohnTGZ
Thank you so much,but it is also written that the motor_constant is in kg.m in this part of the paper

however I thought it was in (N.sec^2/rad^2) on what I thought I understand and also based on these two issues:
5986
110
so how can the motor constant have this unit?

[JohnTGZ]

The units of ω is [Time^-2], there is no radians involved

Motor constant is in (kg)(m).
Moment constant is in (m)

According to the code for motor constant and force:
Motor Constant = Thrust / (Angular_rate^2)
Units of motor constant = [Mass][Length][Time^2] / [Time^2] = [Mass][Length]

According to the code for moment constant and torque:
Moment Constant = (Torque about z axis) / (Thrust along z axis)
Units of Moment constant = [Mass][Length^2][Time^2] / [Mass][Length][Time^2] = [Length]

[mariam0amin]

@JohnTGZ Thanks, I appreciate your help; but, do you know how I may obtain the motor constant in this case? I used to conduct an experimental analysis in which I measured the thrust and the rotor velocity in rpm or rad/sec that corresponded to this thrust. After fitting the data, I obtained the motor constant. However, now that you are saying that it is angular rate, how can I obtain the motor constant in that case? or simply that radians are dimensionless?