Different to the working procedure of 2.0 in OpenHD evo is a lot more versatile. But some advanced features are not exposed in QOpenHD or not automatically enabled.
We differenciate a little in the way that we do not automatically enable the wifi-hotspot. And we also do not stream Video/Telemetry over wifi, but use it mostly for our Webinterface to download Recordings, or debug and SSH-Access.
Mode | Webinterface | SSH | Video | Telemetry | Internet |
---|---|---|---|---|---|
Ethernet-Tethering (Active) | YES | YES | YES | YES | NO |
Ethernet-Tethering (Passive) | YES | YES | YES | YES | YES |
USB-Tethering (Passive) | YES | YES | YES | YES | YES |
Wifi-Hotspot | YES | Yes | NO | NO | NO |
The username is openhd The password is openhd
To enable the Wifi-Hotspot you need to enable it in Air(TMP) or Ground(TMP) The standart IP for the SBC is 192.168.3.1. The password is openhdopenhd
Sometimes the user may override protection-features like the wifi-hotspot being able to share Video/Telemetry or force OpenHD to send Video/Telemetry to a specific IP. This can be done in the hardware.conf on the SD-Card.