Skip to content

Latest commit

 

History

History
119 lines (110 loc) · 9.52 KB

README.md

File metadata and controls

119 lines (110 loc) · 9.52 KB
Raw

Homebridge Status Widget

  • Script for the iOS App Scriptable that shows a small summary of your Homebridge instance
  • All infos shown are based and provided by the Homebridge Config UI X found at https://github.com/oznu/homebridge-config-ui-x
  • Thanks to the github user oznu for providing such a nice programm!
  • This script does not work if you don't have the Homebridge service (Homebridge Config UI X) running
  • This script was developed with Homebridge Config UI X in version 4.32.0 (2020-11-06), Homebridge at version 1.1.6 and Scriptable app in version 1.6.1 on iOS 14.2. Maybe you need to update the UI-service OR Homebridge OR the Scriptable app OR your iPhone if this script does not work for you
  • also thanks to github user kevinkub for providing a line chart example at https://gist.github.com/kevinkub/b74f9c16f050576ae760a7730c19b8e2

How to use (3 setup possibilities)

  • the best way (updatable, supporting the install script from https://scriptdu.de (very recommended)):

    • the script has a configuration mechanism that saves all configurations (in the Configuration class) to iCloud persistently
    • this means the configuration you make can be reused once you install a newer version of this script
    • following variables exist in the configuration:
    • three variables controll this mechanism:
      • configurationFileName = 'purple.json' // change this to an own name e.g. 'configBlack.json' . This name can then be given as a widget parameter in the form 'USE_CONFIG:yourfilename.json' so you don't loose your preferred configuration across script updates (but you will loose it if i have to change the configuration format)
      • usePersistedConfiguration = true; // false would mean to use the visible configuration below; true means the state saved in iCloud (or locally) will be used
      • overwritePersistedConfig = false; // if you like your configuration, run the script ONCE with this param to true, then it is saved and can be used via 'USE_CONFIG:yourfilename.json' in widget params
    • so basically what you need to do is:
      • choose a configurationFileName (must end with '.json')
      • set overwritePersistedConfig to true
      • configure every configuration-variable exactly as you want (including the CREDENTIALS and the URL!)
      • run the script once (this creates a json file in icloud, you can always delete it to start from scratch)
      • set overwritePersistedConfig to false
      • set the widget up with a single parameter in the format 'USE_CONFIG:yourfilename.json'
    • as long as overwritePersistedConfig is false, any change to the config won't take any effect because the persisted one is used if usePersistedConfiguration is true

  • another updatable way (but configuration is lost):

    • set the widget up with parameter in the format <username>,,<password>,,<hbServiceMachineBaseUrl>
    • a valid real example: "admin,,mypassword123,,http://192.168.178.33:8581"
    • if you have authentication set to non in UI-X then just provide any char. Valid would be e.g. "x,,x,,http://192.168.178.33:8581"
    • maybe you need to set usePersistedConfiguration in the config to false to use this older way
    • screenshot of an example when setting it up:

  • hard coded way in the script (not recommended): you need to configure

    • the URL of the system running the Homebridge Config UI X (the hb-service), including the port e.g. http://192.168.178.33:8581
    • username of the administrator of the homebridge-config-ui-x instance (not the actual linux user)
    • password of the administrator of the homebridge-config-ui-x instance
    • the residual parameter can be tweaked a bit for your needs
    • e.g. fileManagerMode, must be set to LOCAL if you do not use iCloud Drive. Default is ICLOUD
    • e.g. the systemGuiName, the name of your system running the Homebridge Config UI X (the hb-service)
    • e.g. the timeout could be increased if your system does not respond within 2 second
    • e.g. set the temperatureUnitConfig to 'FAHRENHEIT' to use °F instead of °C

  • if your homebridge-config-ui-x instance is not reached within the specified timeout (currently 2sec) the following screen is shown:

Notifications

  • the widget now can notify you when a status has changed
  • you will get a notification if:
    • your Homebridge stopped running
    • there is an update available for Homebridge
    • there is an update available for one of your plugins
    • there is an update available for node.js
  • disable notifications by setting notificationEnabled to false
  • enable getting notification when any status was red and is now back to green (normal) by setting the variable disableStateBackToNormalNotifications to false
  • edit the variable notificationIntervalInDays to lengthen or shorten the time between getting the same notification (e.g. plugin update available) again
    • 0 means you get a notification every time the script runs (not recommended)
    • 1 means you get each possible notification to a maximum of 1 time per day
    • 0.5 means you get each possible notification to a maximum of 2 times per day
  • Open a notification to reveal the "Show me!" button which takes you directly to Homebridge Config UI X
  • Here are some screenshots:

Ignoring specific plugin or software updates

  • by filling the empty array of the variable pluginsOrSwUpdatesToIgnore with strings, you can now configure to ignore plugins, Homebridge or Node.js during checking for updates
  • succesfully ignored software will not influence the shown status (e.g. ignoring homebridge UTD status will result in showing the green status always even if there is an update available)
    • for ignoring plugins, enter their npm name (e.g. 'homebridge-fritz') as string in the given empty array
    • for ignoring Homebridge enter 'HOMEBRIDGE_UTD' and for Node enter 'NODEJS_UTD' in the empty array
    • a valid example of the variable would be const pluginsOrSwUpdatesToIgnore = ['homebridge-fritz', 'HOMEBRIDGE_UTD', 'NODEJS_UTD'];
    • if you specify something and run the script inside the Scriptable app, you will get a log output to let you know that you ignored something successfully

Special GUI when running the script via Siri shortcut

  • when you set up a shortcut that executes the script, a different GUI is shown
  • the Siri GUI shows a simple list of available updates so you can check now which of the software have an update
  • also i coded in to let siri speak an answer but this seems to be bugged and not working atm (wrote the Scriptable developer if this is a bug)
  • this is what it looks like:

Styling

  • all things shown below are saved in the configuration file and can be reused in the future after the script logic updates
  • all important texts can be changed to your own texts
    • if you change the top right texts you probably need to adapt the spacing (play around with the variables spacer_beforeFirstStatusColumn, etc and also with spaces in the text)
  • at the top of the script there is a variable bgColorMode that you can set to 'PURPLE_LIGHT', 'PURPLE_DARK', 'BLACK_LIGHT', BLACK_DARK', or 'CUSTOM'
  • in CUSTOM mode the values defined in customBackgroundColor1_light, customBackgroundColor2_light, customBackgroundColor1_dark and customBackgroundColor2_dark are used (you can choose!)
  • adaptToLightOrDarkMode toggles to react to light/dark mode automatically
    • if you use adaptToLightOrDarkMode with mode CUSTOM then customBackgroundColor1_light and customBackgroundColor2_light together are used in the light version and of course customBackgroundColor1_dark and customBackgroundColor2_dark in the dark version
  • fontColor_light and fontColor_dark sets all texts to your chosen color (default is fontColor_light). Works together with adaptToLightOrDarkMode
  • chartColor_light and chartColor_dark controls which color the charts have (default is chartColor_light). Works together with adaptToLightOrDarkMode
  • you even can experiment with logoUrl and choose another logo to download from anywhere
  • you can change the SFSymbols used together with their color (the icons) and the emojis failIcon = ❌ and bulletPointIcon = 🔸 by providing any other emoji

Infos shown in the widget

  • if Homebridge is running
  • if Homebridge is up to date
  • if all of the installed plugins (including Homebridge Config UI X) are up to date
  • if node.js is up to date
  • CPU load
  • CPU temperature
  • RAM usage
  • Uptime for the system the hb-service is running on
  • Uptime for the hb-service (Homebridge Config UI X)

Troubleshoot

  • if the temperature is not shown for you, then the information is not available on your machine
  • triple check the credentials (2FA currently not supported)
  • consider increasing the requestTimeoutInterval variable
  • if some error occurs always check that you have the matching versions
    • the Scriptable app 1.6.1
    • Homebridge Config UI X 4.32.0 (2020-11-06)
    • Homebridge 1.1.6
    • iOS 14.2
  • if your Homebridge Config UI X is reachable and the authentication process succeeded but the further API requests take to long or fail you will get a screen similar to
  • open a github issue if you can't figure it out what the problem is