rtc6

\mainpage Main Page

---

RTC6 Click

RTC6 Click carries Microchip’s MCP79410 Real-Time Clock/Calendar IC with built-in 64 bytes of battery-backed SRAM an additional 1 Kbit of EEPROM.

Click Product page

---

Click library

• Author : MikroE Team
• Date : jan 2020.
• Type : I2C type

Software Support

We provide a library for the Rtc6 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Rtc6 Click driver.

Standard key functions :

• Config Object Initialization function.

void rtc6_cfg_setup ( rtc6_cfg_t *cfg );

• Initialization function.

RTC6_RETVAL rtc6_init ( rtc6_t *ctx, rtc6_cfg_t *cfg );

• Click Default Configuration function.

void rtc6_default_cfg ( rtc6_t *ctx );

Example key functions :

• This function enables automatic switch to battery on VCC failure.

void rtc6_battery_enable ( rtc6_t *ctx );

• This function gets current GMT time and sets it in the RTC.

void rtc6_get_gmt_time ( rtc6_t *ctx, rtc6_time_t *gmt_time );

• his function calculates current local time.

void rtc6_get_local_time ( rtc6_t *ctx, rtc6_time_t *local_time );

Examples Description

This application enables usage of Real-TIme clock and calendar with alarm on RTC 6 Click.

The demo application is composed of two sections :

Application Init

Initializes driver init, sets time zone, sets UTC-GMT time and alarm time

void application_init ( void )
{
    log_cfg_t log_cfg;
    rtc6_cfg_t cfg;
    int8_t time_zone = 2;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    rtc6_cfg_setup( &cfg );
    RTC6_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    rtc6_init( &rtc6, &cfg );

    // Set UTC time

    utc_time.seconds  = 40;
    utc_time.minutes  = 59;
    utc_time.hours    = 23;
    utc_time.monthday = 14;
    utc_time.month    = 12;
    utc_time.year     = 18;
    
    // Set alarm time
    
    alarm_time.seconds  = 0;
    alarm_time.minutes  = 0;
    alarm_time.hours    = 0;
    alarm_time.weekdays  = 0;
    alarm_time.monthday = 15;
    alarm_time.month    = 12;
    alarm_time.year     = 18;

    rtc6_default_cfg( &rtc6, time_zone, &utc_time, &alarm_time );
    log_info( &logger, " ----- Init successfully ----- " );
}
  

Application Task

Reads GMT time and Local time. Checks if the alarm is activated. If the alarm is active, it disable alarm and adjusts the new one within 20 seconds. Logs this data on USBUART every 900ms.

void application_task ( void )
{
    //  Task implementation.

    rtc6_get_gmt_time( &rtc6, &utc_time );
    rtc6_get_local_time( &rtc6, &local_time );
    
    log_printf( &logger, "--- UTC time ---\r\nTime : %d %d %d\r\n", utc_time.hours, utc_time.minutes, utc_time.seconds );
    
    log_printf( &logger, "Date : %d %d %d\r\n", utc_time.monthday, utc_time.month, utc_time.year );
    
    log_printf( &logger, "--- Local time ---\r\nTime : %d %d %d\r\n", local_time.hours, local_time.minutes, local_time.seconds );

    log_printf( &logger, "Date : %d %d %d\r\n \r\n", local_time.monthday, local_time.month, local_time.year );
    
    if ( rtc6_is_active_alarm( &rtc6 ) != 0 )
    {
        log_printf( &logger, " ----- Active alarm ----- \r\n" );
        rtc6_disable_alarm( &rtc6, RTC6_ALARM_0 );
        rtc6_repeat_alarm( &rtc6, RTC6_ALARM_0, 20 );
    }

    Delay_ms ( 900 );
}  

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Rtc6

Additional notes and informations

Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---