rn4678

\mainpage Main Page

---

RN4678 Click

RN4678 Click carries the RN4678 Bluetooth® 4.2 dual mode module from Microchip. The Click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over I2C and UART interface, with additional functionality provided by the following pins on the mikroBUS™ line: AN, RST, CS, PWM, INT.

Click Product page

---

Click library

• Author : MikroE Team
• Date : jun 2020.
• Type : UART type

Software Support

We provide a library for the Rn4678 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Rn4678 Click driver.

Standard key functions :

• Config Object Initialization function.

void rn4678_cfg_setup ( rn4678_cfg_t *cfg );

• Initialization function.

RN4678_RETVAL rn4678_init ( rn4678_t *ctx, rn4678_cfg_t *cfg );

• Enable device function

void rn4678_enable ( rn4678_t *ctx );

Example key functions :

• Enter the command mode function

void rn4678_enter_command_mode ( rn4678_t *ctx );

• Exit the command mode function

void rn4678_exit_command_mode ( rn4678_t *ctx );

• Set the device name function

void rn4678_set_device_name ( rn4678_t *ctx, uint8_t *name );

Examples Description

This example reads and processes data from RN4678 clicks.

The demo application is composed of two sections :

Application Init

Initializes the driver and configures the Click board.

void application_init ( void )
{
    log_cfg_t log_cfg;
    rn4678_cfg_t cfg;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    rn4678_cfg_setup( &cfg );
    RN4678_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    rn4678_init( &rn4678, &cfg );

    rn4678_enable ( &rn4678 );
    Delay_ms ( 1000 );
    rn4678_hw_reset ( &rn4678 );
    Delay_ms ( 1000 );
    
    log_printf( &logger, "Configuring the module...\n" );
    
    do
    {    
        log_printf( &logger, " --- Command mode --- \r\n" );
        rn4678_enter_command_mode( &rn4678 );
    }
    while( rn4678_process( "CMD" ) != 1 );
    
    do
    {
        log_printf( &logger, " --- Device name --- \r\n" );
        rn4678_set_device_name( &rn4678, &DEVICE_NAME_DATA[ 0 ] );
    }
    while( rn4678_process( "AOK" ) != 1 );

    do
    {
        log_printf( &logger, " --- Status string --- \r\n" );
        rn4678_set_extended_status_string( &rn4678, &EXTENDED_STRING_DATA[ 0 ] );
    }
    while( rn4678_process( "AOK" ) != 1 );

    do
    {
        log_printf( &logger, " --- Operating mode --- \r\n" );
        rn4678_set_operating_mode( &rn4678, 0 );
    }
    while( rn4678_process( "AOK" ) != 1 );

    do
    {
        log_printf( &logger, " --- Authentication --- \r\n" );
        rn4678_set_authentication( &rn4678, 1 );
    }
    while( rn4678_process( "AOK" ) != 1 );

    do
    {
        log_printf( &logger, " --- Pin code --- \r\n" );
        rn4678_set_security_pin_code( &rn4678, &PIN_CODE_DATA[ 0 ] );
    }
    while( rn4678_process( "AOK" ) != 1 );

    do
    {
        log_printf( &logger, " --- Exit command mode --- \r\n" );
        rn4678_exit_command_mode( &rn4678 );
    }
    while( rn4678_process( "END" ) != 1 );
    
    log_printf( &logger, "The module has been configured.\n" );
    
    rn4678_set_cts_pin( &rn4678, 0 );
}
  

Application Task

Checks for the received data, reads it and replies with a certain message.

void application_task ( void )
{
    rn4678_process( PROCESS_LOG_RSP );
}

Note

We have used the Serial Bluetooth Terminal smartphone application for the test. A smartphone and the Click board must be paired in order to exchange messages with each other.

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Rn4678

Additional notes and informations

Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---