ldc1000

\mainpage Main Page

---

LDC 1000 Click

LDC1000 Click carries the world's first inductance-to-digital converter IC, along with a detachable sensor (an LC tank comprising a 36-turn PCB coil and a 100pF 1% NPO capacitor). The LDC1000 IC has a sub-micron resolution in short range applications; the board is ideal for highly precise short range measurements of the position, motion or composition of conductive targets.

Click Product page

---

Click library

• Author : MikroE Team
• Date : Dec 2019.
• Type : SPI type

Software Support

We provide a library for the Ldc1000 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Ldc1000 Click driver.

Standard key functions :

• Config Object Initialization function.

void ldc1000_cfg_setup ( ldc1000_cfg_t *cfg );

• Initialization function.

LDC1000_RETVAL ldc1000_init ( ldc1000_t *ctx, ldc1000_cfg_t *cfg );

• Click Default Configuration function.

void ldc1000_default_cfg ( ldc1000_t *ctx );

Example key functions :

• This function reads the proximity data.

uint16_t ldc1000_get_proximity_data ( ldc1000_t *ctx );

• This function reads the inductance data.

float ldc1000_get_inductance_data ( ldc1000_t *ctx );

• This function reads the input voltage from the INT pin.

uint8_t ldc1000_get_int_input ( ldc1000_t *ctx );

Examples Description

This example showcases how to initialize and configure the logger and Click modules and read and display proximity and impendance data.

The demo application is composed of two sections :

Application Init

This function initializes and configures the logger and Click modules. Configuration data is written to the: rp maximum/minimum, sensor frequency, LDC/Clock/Power registers.

void application_init ( )
{
    log_cfg_t log_cfg;
    ldc1000_cfg_t cfg;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    ldc1000_cfg_setup( &cfg );
    LDC1000_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    ldc1000_init( &ldc1000, &cfg );
    Delay_100ms( );
    ldc1000_default_cfg( &ldc1000 );
    Delay_100ms( );
}
  

Application Task

This function reads and displays proximity and impendance data every 10th of a second.

void application_task ( )
{
    uint16_t proximity;
    uint16_t inductance;

    proximity = ldc1000_get_proximity_data( &ldc1000 );
    inductance = ldc1000_get_inductance_data( &ldc1000 );

    if ( ( ( proximity - old_proximity ) > LDC1000_SENSITIVITY ) &&
         ( ( old_proximity - proximity ) > LDC1000_SENSITIVITY ) )
    {
        log_printf( &logger, " * Proximity: %d \r\n", proximity );

        log_printf( &logger, " * Impendance: %f uH\r\n", inductance );

        old_proximity = proximity;

        log_printf( &logger, "--------------------\r\n" );
        Delay_100ms();
    }
} 

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Ldc1000

Additional notes and informations

Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---