\mainpage Main Page
IrThermo 3 Click is a device which allows contactless measurement of the object temperature.
- Author : MikroE Team
- Date : nov 2019.
- Type : I2C type
We provide a library for the IrThermo3 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.
This library contains API for IrThermo3 Click driver.
irthermo3_cfg_setup
Config Object Initialization function.
void irthermo3_cfg_setup ( irthermo3_cfg_t *cfg );
irthermo3_init
Initialization function.
err_t irthermo3_init ( irthermo3_t *ctx, irthermo3_cfg_t *cfg );
irthermo3_cal
Calibration function
void irthermo3_cal ( irthermo3_t *ctx );
irthermo3_get_ambient_temp
Read Ambient Temperature function
float irthermo3_get_ambient_temp ( irthermo3_t *ctx );
irthermo3_get_object_temp
Read Object Temperature function
float irthermo3_get_object_temp ( irthermo3_t *ctx );
The demo application displays ambient and object temperature measurements using IrThermo 3 Click.
The demo application is composed of two sections :
Initializes the driver, resets the device and performs calibration.
void application_init ( void )
{
log_cfg_t log_cfg;
irthermo3_cfg_t cfg;
/**
* Logger initialization.
* Default baud rate: 115200
* Default log level: LOG_LEVEL_DEBUG
* @note If USB_UART_RX and USB_UART_TX
* are defined as HAL_PIN_NC, you will
* need to define them manually for log to work.
* See @b LOG_MAP_USB_UART macro definition for detailed explanation.
*/
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization.
irthermo3_cfg_setup( &cfg );
IRTHERMO3_MAP_MIKROBUS( cfg, MIKROBUS_1 );
irthermo3_init( &irthermo3, &cfg );
irthermo3_cal ( &irthermo3 );
Delay_ms ( 500 );
}
The device measures ambient and object temperature in degrees Celsius and displays them on the USB UART once per second.
void application_task ( void )
{
amb_temp = irthermo3_get_ambient_temp( &irthermo3 );
log_printf( &logger, "Ambient temperature: %.2f degC \r\n", amb_temp );
obj_temp = irthermo3_get_object_temp( &irthermo3 );
log_printf( &logger, "Object temperature: %.2f degC \r\n", obj_temp );
log_printf( &logger, "----------------------------\r\n" );
Delay_ms ( 1000 );
}
The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.
Other mikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.IrThermo3
Additional notes and informations
Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.