ezocarrierph

\mainpage Main Page

---

EZO Carrier pH Click

EZO Carrier Click - pH is a compact add-on board that allows you to measure the potential of hydrogen (the power of hydrogen) in your application. This board features the EZO™ pH, a pH measurement interface circuit board from Atlas Scientific.

Click Product page

---

Click library

• Author : Stefan Ilic
• Date : Oct 2023.
• Type : UART type

Software Support

We provide a library for the EZO Carrier pH Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

This library contains API for EZO Carrier pH Click driver.

Standard key functions :

• ezocarrierph_cfg_setup Config Object Initialization function.

void ezocarrierph_cfg_setup ( ezocarrierph_cfg_t *cfg );

• ezocarrierph_init Initialization function.

err_t ezocarrierph_init ( ezocarrierph_t *ctx, ezocarrierph_cfg_t *cfg );

Example key functions :

• ezocarrierph_send_cmd Send command function.

void ezocarrierph_send_cmd ( ezocarrierph_t *ctx, uint8_t *cmd );

• ezocarrierph_send_cmd_with_par Send command function with parameter.

void ezocarrierph_send_cmd_with_par ( ezocarrierph_t *ctx, uint8_t *cmd, uint8_t *param_buf );

• ezocarrierph_send_cmd_check Check the sent command.

void ezocarrierph_send_cmd_check ( ezocarrierph_t *ctx, uint8_t *cmd );

Example Description

This example demonstrates the use of EZO Carrier pH Click board by processing the incoming data and displaying them on the USB UART.

The demo application is composed of two sections :

Application Init

Initializes the driver, performs the Click default factory reset, and mid point calibration.

void application_init ( void ) 
{
    log_cfg_t log_cfg;  /**< Logger config object. */
    ezocarrierph_cfg_t ezocarrierph_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.
    ezocarrierph_cfg_setup( &ezocarrierph_cfg );
    EZOCARRIERPH_MAP_MIKROBUS( ezocarrierph_cfg, MIKROBUS_1 );
    if ( UART_ERROR == ezocarrierph_init( &ezocarrierph, &ezocarrierph_cfg ) ) 
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    log_printf( &logger, "Device status \r\n" );
    ezocarrierph_send_cmd( &ezocarrierph, EZOCARRIERPH_CMD_STATUS );
    error_flag = ezocarrierph_rsp_check( &ezocarrierph, EZOCARRIERPH_RSP_OK );
    ezocarrierph_error_check( error_flag );

    log_printf( &logger, "Factory reset \r\n" );
    ezocarrierph_send_cmd( &ezocarrierph, EZOCARRIERPH_CMD_FACTORY );
    error_flag = ezocarrierph_rsp_check( &ezocarrierph, EZOCARRIERPH_RSP_READY );
    ezocarrierph_error_check( error_flag );

    log_printf( &logger, "Device info \r\n" );
    ezocarrierph_send_cmd( &ezocarrierph, EZOCARRIERPH_CMD_DEV_INFO );
    error_flag = ezocarrierph_rsp_check( &ezocarrierph, EZOCARRIERPH_RSP_OK );
    ezocarrierph_error_check( error_flag );

    uint8_t n_cnt = 0;
    uint8_t last_reading[ APP_BUFFER_SIZE ] = { 0 };
    ezocarrierph_clear_app_buf( );
    ezocarrierph_send_cmd( &ezocarrierph, EZOCARRIERPH_CMD_SINGLE_READ );
    ezocarrierph_process ( &ezocarrierph );
    strcpy( last_reading, app_buf );
    log_printf( &logger, "Mid point calibration \r\n" );
    log_printf( &logger, "- - - - - - - - - - - - - - -\r\n" );
    log_printf( &logger, "Place probe into pH neutral solution \r\n" );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    log_printf( &logger, "Starting calibration \r\n" );
    log_printf( &logger, "- - - - - - - - - - - - - - -\r\n" );
    log_printf( &logger, "Waiting for stable readings \r\n" );
    while ( n_cnt <= 5 )
    {
        if ( EZOCARRIERPH_OK == ezocarrierph_process ( &ezocarrierph ) )
        {  
            if ( 0 == strstr( app_buf, last_reading ) )
            {
                n_cnt++;
            }
            else
            {
                strcpy( last_reading, app_buf );
                n_cnt = 0;
            }
        }
        log_printf( &logger, "- " );
        Delay_ms ( 1000 );
        ezocarrierph_clear_app_buf( );
    }
    
    #define MID_POINT_CALIB         "mid,7.00"
    log_printf( &logger, "\r\n Calibration \r\n" );
    ezocarrierph_send_cmd_with_par( &ezocarrierph, EZOCARRIERPH_CMD_CAL, MID_POINT_CALIB );
    error_flag = ezocarrierph_rsp_check( &ezocarrierph, EZOCARRIERPH_RSP_OK );
    ezocarrierph_error_check( error_flag );

    #define DISABLE_CONT_READ       "0"
    log_printf( &logger, "Disable continuous reading mode \r\n" );
    ezocarrierph_send_cmd_with_par( &ezocarrierph, EZOCARRIERPH_CMD_CONT_READ, DISABLE_CONT_READ );
    error_flag = ezocarrierph_rsp_check( &ezocarrierph, EZOCARRIERPH_RSP_OK );
    ezocarrierph_error_check( error_flag );

    log_info( &logger, " Application Task " );
}

Application Task

Reads and processes all incoming pH value data and displays them on the USB UART.

void application_task ( void ) 
{
    log_printf( &logger, "Reading... \r\n" );
    ezocarrierph_send_cmd( &ezocarrierph, EZOCARRIERPH_CMD_SINGLE_READ );
    error_flag = ezocarrierph_rsp_check( &ezocarrierph, EZOCARRIERPH_RSP_OK );
    ezocarrierph_error_check( error_flag );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.EZOCarrierpH

Additional notes and informations

Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---