\mainpage Main Page
CAN FD 3 Click is a add-on board based on TLE9251V CAN network transceiver, designed for HS CAN networks up to 5 Mbit/s in automotive and industrial applications.
- Author : MikroE Team
- Date : Jun 2020.
- Type : UART type
We provide a library for the CanFd3 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.
This library contains API for CanFd3 Click driver.
- Config Object Initialization function.
void canfd3_cfg_setup ( canfd3_cfg_t *cfg );
- Initialization function.
CANFD3_RETVAL canfd3_init ( canfd3_t *ctx, canfd3_cfg_t *cfg );
- Generic read function.
int32_t canfd3_generic_read ( canfd3_t *ctx, char *data_buf, uint16_t max_len );
- Generic write function.
void canfd3_generic_write ( canfd3_t *ctx, char *data_buf, uint16_t len );
- Sets the CS pin state.
void canfd3_set_cs_pin ( canfd3_t *ctx, uint8_t mode );
This example reads and processes data from CAN FD 3 clicks.
The demo application is composed of two sections :
Initializes the driver and enables the Click board.
void application_init ( void )
{
log_cfg_t log_cfg;
canfd3_cfg_t cfg;
/**
* Logger initialization.
* Default baud rate: 115200
* Default log level: LOG_LEVEL_DEBUG
* @note If USB_UART_RX and USB_UART_TX
* are defined as HAL_PIN_NC, you will
* need to define them manually for log to work.
* See @b LOG_MAP_USB_UART macro definition for detailed explanation.
*/
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization.
canfd3_cfg_setup( &cfg );
CANFD3_MAP_MIKROBUS( cfg, MIKROBUS_1 );
canfd3_init( &canfd3, &cfg );
canfd3_set_cs_pin( &canfd3, CANFD3_MODE_NORMAL );
Delay_ms ( 100 );
}
Depending on the selected mode, it reads all the received data or sends the desired message every 2 seconds.
void application_task ( void )
{
#ifdef DEMO_APP_RECEIVER
canfd3_process( );
#endif
#ifdef DEMO_APP_TRANSMITTER
canfd3_generic_write( &canfd3, TEXT_TO_SEND, 8 );
log_info( &logger, "--- The message is sent ---" );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
#endif
}
The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.
Other mikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.CanFd3
Additional notes and informations
Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.