From 51c105565985945ab5100090e3226ee5ac360a5a Mon Sep 17 00:00:00 2001 From: Christian Kindel Date: Sun, 30 Jun 2019 20:57:31 -0500 Subject: [PATCH] Fix Prusa PETG cost, bump to 10.0.21 --- live/PrusaResearch/10.0.21.ini | 1294 ++++++++++++++++++++++++++++++++ live/PrusaResearch/index.idx | 1 + 2 files changed, 1295 insertions(+) create mode 100644 live/PrusaResearch/10.0.21.ini diff --git a/live/PrusaResearch/10.0.21.ini b/live/PrusaResearch/10.0.21.ini new file mode 100644 index 0000000..94844e5 --- /dev/null +++ b/live/PrusaResearch/10.0.21.ini @@ -0,0 +1,1294 @@ +# Print profiles for the MakeICT Makerspace printers. + + +[vendor] +# Vendor name will be shown by the Config Wizard. +name = MakeICT Makerspace + +# Configuration version of this file. Config file will only be installed, if the config_version differs. +# This means, the server may force the Slic3r configuration to be downgraded. +config_version = 10.0.21 + +# Where to get the updates from? +config_update_url = https://raw.githubusercontent.com/MakeICT/Slic3r-Configuration/master/live/PrusaResearch/ + +# The printer models will be shown by the Configuration Wizard in this order, +# also the first model installed & the first nozzle installed will be activated after install. +#TODO: One day we may differentiate variants of the nozzles / hot ends, +#for example by the melt zone size, or whether the nozzle is hardened. +# Printer model name will be shown by the installation wizard. + +[printer_model:ULTIMAKER2] +name = Ultimaker 2 +variants = 0.4; dual_0.4 + +[printer_model:ROSTOCKMAXV2] +name = Rostock Max V2 +variants = 0.5 + +[printer_model:CREALITYCR10S] +name = Creality CR-10S +variants = 0.4 + +[printer_model:PRUSAI3MK3] +name = Prusa i3 MK3 +variants = 0.4 + + +# All presets starting with asterisk, for example *common*, are intermediate and they will +# not make it into the user interface. + +##############################################################################################33 + +[print:Creality] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 3 +bridge_acceleration = 0 +bridge_angle = 0 +bridge_flow_ratio = 1 +bridge_speed = 45 +brim_width = 0 +clip_multipart_objects = 0 +compatible_printers = Creality +compatible_printers_condition = +complete_objects = 0 +default_acceleration = 0 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 0 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.35 +external_perimeter_speed = 75% +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.35 +fill_angle = 45 +fill_density = 15% +fill_pattern = rectilinear +first_layer_acceleration = 0 +first_layer_extrusion_width = 110% +first_layer_height = 0.3 +first_layer_speed = 40 +gap_fill_speed = 20 +gcode_comments = 0 +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.35 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 20% +infill_speed = 50 +inherits = CR-10 +interface_shells = 0 +layer_height = 0.2 +max_print_speed = 80 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 10 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.35 +perimeter_speed = 45 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = aligned +skirt_distance = 6 +skirt_height = 1 +skirts = 2 +small_perimeter_speed = 15 +solid_infill_below_area = 5 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.35 +solid_infill_speed = 35 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.2 +support_material_enforce_layers = 2 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = honeycomb +support_material_spacing = 2.5 +support_material_speed = 40 +support_material_synchronize_layers = 0 +support_material_threshold = 0 +support_material_with_sheath = 1 +support_material_xy_spacing = 50% +thin_walls = 1 +threads = 8 +top_infill_extrusion_width = 0.35 +top_solid_infill_speed = 30 +top_solid_layers = 3 +travel_speed = 150 +wipe_tower = 0 +wipe_tower_bridging = 10 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:Rostock] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 2 +bridge_acceleration = 0 +bridge_angle = 0 +bridge_flow_ratio = 1 +bridge_speed = 45 +brim_width = 0 +clip_multipart_objects = 0 +complete_objects = 0 +default_acceleration = 0 + +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 0 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0 +external_perimeter_speed = 50% +external_perimeters_first = 0 +extra_perimeters = 1 + +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0 +fill_angle = 45 +fill_density = 15% +fill_pattern = rectilinear +first_layer_acceleration = 0 +first_layer_extrusion_width = 200% +first_layer_height = 0.35 +first_layer_speed = 15 +gap_fill_speed = 20 +gcode_comments = 0 +infill_acceleration = 0 + +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 20% +infill_speed = 40 +inherits = +interface_shells = 0 +layer_height = 0.25 +max_print_speed = 80 + +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 25 +notes = +only_retract_when_crossing_perimeters = 1 + +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 + +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 30 +perimeters = 2 + +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = aligned +skirt_distance = 6 +skirt_height = 1 +skirts = 1 +small_perimeter_speed = 15 +solid_infill_below_area = 70 + +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0 +solid_infill_speed = 20 + +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.2 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 + +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2.5 +support_material_speed = 40 +support_material_synchronize_layers = 0 +support_material_threshold = 0 +support_material_with_sheath = 1 +support_material_xy_spacing = 50% +thin_walls = 1 +threads = 4 +top_infill_extrusion_width = 0 +top_solid_infill_speed = 30 +top_solid_layers = 4 +travel_speed = 70 +wipe_tower = 0 + +wipe_tower_bridging = 10 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +compatible_printers = "Rostock" +compatible_printers_condition = + +[print:Ultimaker] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 3 +bridge_acceleration = 0 +bridge_angle = 0 +bridge_flow_ratio = 1 +bridge_speed = 45 +brim_width = 0 +clip_multipart_objects = 0 +complete_objects = 0 +default_acceleration = 0 + +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 0 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.35 +external_perimeter_speed = 75% +external_perimeters_first = 0 +extra_perimeters = 1 + +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.35 + +fill_angle = 45 +fill_density = 20% +fill_pattern = rectilinear +first_layer_acceleration = 0 +first_layer_extrusion_width = 110% +first_layer_height = 0.3 +first_layer_speed = 40 +gap_fill_speed = 20 +gcode_comments = 0 +infill_acceleration = 0 + +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.35 + +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 20% +infill_speed = 50 +inherits = +interface_shells = 0 +layer_height = 0.2 +max_print_speed = 80 + +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 10 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.35 +perimeter_speed = 45 +perimeters = 2 + +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = aligned +skirt_distance = 6 +skirt_height = 1 +skirts = 2 +small_perimeter_speed = 15 +solid_infill_below_area = 70 + +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.35 +solid_infill_speed = 35 + +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.2 +support_material_enforce_layers = 2 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = honeycomb +support_material_spacing = 2.5 +support_material_speed = 40 +support_material_synchronize_layers = 0 +support_material_threshold = 0 +support_material_with_sheath = 1 +support_material_xy_spacing = 50% +thin_walls = 1 +threads = 4 +top_infill_extrusion_width = 0.35 +top_solid_infill_speed = 30 +top_solid_layers = 4 +travel_speed = 150 +wipe_tower = 0 + +wipe_tower_bridging = 10 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +compatible_printers = "Ultimaker" +compatible_printers_condition = + +[print:Ultimaker DUAL] +compatible_printers = "Ultimaker DUAL" +compatible_printers_condition = +inherits = Ultimaker +min_skirt_length = 30 +notes = +ooze_prevention = 1 +post_process = +print_settings_id = Ultimaker DUAL +single_extruder_multi_material_priming = 1 +skirts = 1 +solid_infill_speed = 35 +spiral_vase = 0 +standby_temperature_delta = -5 +wipe_tower = 0 +wipe_tower_bridging = 10 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 20 +wipe_tower_y = 20 + +[print:Prusa - Standard] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.95 +bridge_speed = 30 +brim_width = 0 +clip_multipart_objects = 1 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 35 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = grid +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 1500 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 170 +inherits = +interface_shells = 0 +layer_height = 0.2 +max_print_speed = 170 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 45 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 170 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 8 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 50 +top_solid_layers = 5 +travel_speed = 180 +wipe_tower = 1 +wipe_tower_bridging = 10 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +compatible_printers = "Prusa_" +compatible_printers_condition = + + + + +########################################################################################################################## + +[filament:Creality PLA] +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = Creality +compatible_printers_condition = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #FF1100 +filament_cost = 40 +filament_density = 1.25 +filament_diameter = 1.75 +filament_loading_speed = 28 +filament_max_volumetric_speed = 0 +filament_notes = "" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_settings_id = "" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = PLA +filament_unloading_speed = 90 +first_layer_bed_temperature = 60 +first_layer_temperature = 215 +inherits = CR-10 PLA +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 10 +slowdown_below_layer_time = 5 +start_filament_gcode = "; Filament gcode\n" +temperature = 210 + +[filament:Creality ABS] +bed_temperature = 80 +bridge_fan_speed = 30 +compatible_printers = Creality +compatible_printers_condition = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #FF1100 +filament_cost = 40 +filament_density = 1.04 +filament_diameter = 1.75 +filament_loading_speed = 28 +filament_max_volumetric_speed = 0 +filament_notes = "" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_settings_id = "" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = ABS +filament_unloading_speed = 90 +first_layer_bed_temperature = 80 +first_layer_temperature = 255 +inherits = CR-10 ABS +max_fan_speed = 30 +min_fan_speed = 20 +min_print_speed = 15 +slowdown_below_layer_time = 20 +start_filament_gcode = "; Filament gcode\n" +temperature = 255 + +[filament:Creality PETG] +bed_temperature = 82 +bridge_fan_speed = 100 +compatible_printers = Creality +compatible_printers_condition = +cooling = 1 +disable_fan_first_layers = 2 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 0.95 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #FF1100 +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 40 +filament_density = 1.27 +filament_diameter = 1.72 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 0 +filament_minimal_purge_on_wipe_tower = 15 +filament_notes = "" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_settings_id = "" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = PETG +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +first_layer_bed_temperature = 85 +first_layer_temperature = 250 +inherits = Ultimaker PETG +max_fan_speed = 100 +min_fan_speed = 35 +min_print_speed = 10 +slowdown_below_layer_time = 5 +start_filament_gcode = "; Filament gcode\n" +temperature = 245 + +[filament:Rostock ABS] +bed_temperature = 80 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 30 +filament_colour = #FFFFFF + +filament_cost = 40 +filament_density = 1.05 +filament_diameter = 1.75 +filament_loading_speed = 28 +filament_max_volumetric_speed = 0 +filament_notes = "" + +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_settings_id = "" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = ABS +filament_unloading_speed = 90 +first_layer_bed_temperature = 80 +first_layer_temperature = 240 +inherits = +max_fan_speed = 100 +min_fan_speed = 41 +min_print_speed = 10 +slowdown_below_layer_time = 10 +start_filament_gcode = "; Filament gcode\n" +temperature = 230 + +compatible_printers = "Rostock" +compatible_printers_condition = + +[filament:Rostock PLA] + +bed_temperature = 60 +bridge_fan_speed = 100 +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #FFFFFF + +filament_cost = 40 +filament_density = 1.25 +filament_diameter = 1.75 +filament_loading_speed = 28 +filament_max_volumetric_speed = 0 +filament_notes = "" + +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_settings_id = "" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = PLA +filament_unloading_speed = 90 + +first_layer_bed_temperature = 60 +first_layer_temperature = 215 +inherits = +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 10 +slowdown_below_layer_time = 10 +start_filament_gcode = "; Filament gcode\n" +temperature = 210 + +compatible_printers = "Rostock" +compatible_printers_condition = + +[filament:Rostock PLA - Wood] + +bed_temperature = 60 +bridge_fan_speed = 100 +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #FFFFFF + +filament_cost = 40 +filament_density = 1.25 +filament_diameter = 1.75 +filament_loading_speed = 28 +filament_max_volumetric_speed = 0 +filament_notes = "" + +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_settings_id = "" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = PLA +filament_unloading_speed = 90 + +first_layer_bed_temperature = 60 +first_layer_temperature = 215 +inherits = +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 10 +slowdown_below_layer_time = 10 +start_filament_gcode = "; Filament gcode\n" +temperature = 200 + +compatible_printers = "Rostock" +compatible_printers_condition = + +[filament:Ultimaker ABS] +bed_temperature = 80 +bridge_fan_speed = 100 + +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 0.93 +fan_always_on = 0 +fan_below_layer_time = 60 +filament_colour = #FF1100 + +filament_cost = 40 +filament_density = 1.05 +filament_diameter = 1.75 +filament_loading_speed = 28 +filament_max_volumetric_speed = 0 +filament_notes = "" + +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_settings_id = "" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = ABS +filament_unloading_speed = 90 +first_layer_bed_temperature = 80 +first_layer_temperature = 240 +inherits = +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 10 +slowdown_below_layer_time = 5 +start_filament_gcode = "; Filament gcode\n" +temperature = 240 + +compatible_printers = "Ultimaker" +compatible_printers_condition = + +[filament:Ultimaker PETG] +bed_temperature = 82 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 2 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 0.95 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #FF1100 + +filament_cost = 40 +filament_density = 1.27 +filament_diameter = 1.72 +filament_loading_speed = 28 +filament_max_volumetric_speed = 0 +filament_notes = "" + +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_settings_id = "" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = PETG +filament_unloading_speed = 90 +first_layer_bed_temperature = 85 +first_layer_temperature = 250 +inherits = +max_fan_speed = 100 +min_fan_speed = 35 +min_print_speed = 10 +slowdown_below_layer_time = 5 +start_filament_gcode = "; Filament gcode\n" +temperature = 245 + +compatible_printers = "Ultimaker" +compatible_printers_condition = + + +[filament:Ultimaker PLA] + +bed_temperature = 60 +bridge_fan_speed = 100 +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 0.95 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #FF1100 + +filament_cost = 40 +filament_density = 1.25 +filament_diameter = 1.75 +filament_loading_speed = 28 +filament_max_volumetric_speed = 0 +filament_notes = "" + +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_settings_id = "" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = PLA +filament_unloading_speed = 90 + +first_layer_bed_temperature = 60 +first_layer_temperature = 215 +inherits = +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 10 +slowdown_below_layer_time = 5 +start_filament_gcode = "; Filament gcode\n" +temperature = 210 + +compatible_printers = "Ultimaker" +compatible_printers_condition = + +[filament:Ultimaker PLA DUAL] +compatible_printers = "Ultimaker DUAL" +compatible_printers_condition = +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_load_time = 0 +filament_loading_speed_start = 3 +filament_minimal_purge_on_wipe_tower = 15 +filament_settings_id = "Ultimaker PLA DUAL" +first_layer_temperature = 195 +inherits = Ultimaker PLA +temperature = 190 + +[filament:Prusa PLA] +bed_temperature = 60 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #FF3232 +filament_cost = 40 +filament_density = 1.25 +filament_diameter = 1.75 +filament_loading_speed = 28 +filament_max_volumetric_speed = 15 +filament_notes = "" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_settings_id = "" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = PLA +filament_unloading_speed = 90 +first_layer_bed_temperature = 60 +first_layer_temperature = 215 +inherits = +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 15 +slowdown_below_layer_time = 20 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +temperature = 210 + +compatible_printers = "Prusa_" +compatible_printers_condition = + +[filament:Prusa ABS] +bed_temperature = 110 +bridge_fan_speed = 30 +compatible_printers = "Prusa_" +compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +compatible_prints = +compatible_prints_condition = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #3A80CA +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 40 +filament_density = 1.04 +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 11 +filament_minimal_purge_on_wipe_tower = 15 +filament_notes = "List of materials tested with standard ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" +filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_settings_id = "" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = ABS +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +first_layer_bed_temperature = 100 +first_layer_temperature = 255 +inherits = Generic ABS +max_fan_speed = 30 +min_fan_speed = 20 +min_print_speed = 15 +slowdown_below_layer_time = 20 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +temperature = 255 + +[filament:Prusa PETG] + +bed_temperature = 90 +bridge_fan_speed = 50 +compatible_printers = "Prusa_" +compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) +compatible_prints = +compatible_prints_condition = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #FF8000 +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 40 +filament_density = 1.27 +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_loading_speed_start = 3 +filament_max_volumetric_speed = 8 +filament_minimal_purge_on_wipe_tower = 15 +filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_settings_id = "" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = PET +filament_unload_time = 0 +filament_unloading_speed = 90 +filament_unloading_speed_start = 100 +first_layer_bed_temperature = 85 +first_layer_temperature = 230 +inherits = Generic PET +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 15 +slowdown_below_layer_time = 20 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}24{else}45{endif} ; Filament gcode" +temperature = 240 + +[filament:Prusa Flex] +bed_temperature = 50 +bridge_fan_speed = 100 +compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1 +cooling = 0 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1.2 +fan_always_on = 0 +fan_below_layer_time = 100 +filament_colour = #00CA0A +filament_cost = 40 +filament_density = 1.2 +filament_diameter = 1.75 +filament_loading_speed = 28 +filament_max_volumetric_speed = 1.5 +filament_notes = "" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_settings_id = "" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = FLEX +filament_unloading_speed = 90 +first_layer_bed_temperature = 50 +first_layer_temperature = 240 +inherits = +max_fan_speed = 90 +min_fan_speed = 70 +min_print_speed = 15 +slowdown_below_layer_time = 20 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" +temperature = 240 + +compatible_printers = "Prusa_" + +################################################################################## + + + +[printer:Ultimaker] +bed_shape = 0x0,210x0,210x210,0x210 +before_layer_gcode = +between_objects_gcode = +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +deretract_speed = 0 +end_gcode = G28 ; home all\nM104 S0 ; turn off heaters\nM140 S0 ; turn off bed\nM84 ; disable motors +extruder_colour = "" +extruder_offset = 0x0 +gcode_flavor = marlin +inherits = +layer_gcode = +max_layer_height = 0 +max_print_height = 200 +min_layer_height = 0.07 +nozzle_diameter = 0.4 +octoprint_apikey = 672B8BCE1CD6427E8CD9CE77E9D52B51 +octoprint_cafile = +octoprint_host = ultimaker.makeict.org +parking_pos_retraction = 92 +printer_settings_id = +retract_before_travel = 2 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 5 +retract_length_toolchange = 10 +retract_lift = 0 +retract_lift_above = 0 +retract_lift_below = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 40 +serial_port = +serial_speed = 250000 +silent_mode = 0 +single_extruder_multi_material = 0 +start_gcode = G28 ; home all axes\nG1 X110 Y45 F3000 ; bring extruder to the front\nG92 E0 ; zero the extruded length\nG1 Z30 ; lower\nG1 E50 F225 ; purge nozzle with 50mm of filament\nG1 X80 Y60 F3000 ; move aside of the puddle of primed plastic\nG92 E0 ; zero the extruded length again +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 0 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 + +printer_vendor = MakeICT + +printer_model = ULTIMAKER2 +printer_variant = 0.4 +default_print_profile = "Ultimaker" +default_filament_profile = "Ultimaker PLA" +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_MAKEICT\nPRINTER_MODEL_ULTIMAKER2\n + + +[printer:Ultimaker DUAL] +default_filament_profile = "Ultimaker PLA DUAL"; +default_print_profile = "Ultimaker DUAL" +extra_loading_move = -2 +extruder_colour = #F0FD00;#372DFF +extruder_offset = 0x0,0x0 +host_type = octoprint +inherits = Ultimaker +max_layer_height = 0,0 +min_layer_height = 0.07,0.07 +nozzle_diameter = 0.4,0.4 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_MAKEICT\nPRINTER_MODEL_ULTIMAKER2\n +printer_settings_id = Ultimaker DUAL +printer_variant = dual_0.4 +remaining_times = 0 +retract_before_travel = 2,2 +retract_before_wipe = 0%,0% +retract_layer_change = 1,1 +retract_length = 2,2 +retract_length_toolchange = 10,10 +retract_lift = 0,0 +retract_lift_above = 0,0 +retract_lift_below = 0,0 +retract_restart_extra = 0,0 +retract_restart_extra_toolchange = 0,0 +retract_speed = 40,40 +silent_mode = 0 +single_extruder_multi_material = 0 +wipe = 1,1 + + +[printer:Rostock] +bed_shape = 129.288x13.5887,127.159x27.0285,123.637x40.1722,118.761x52.8758,112.583x65,105.172x76.4121,96.6088x86.987,86.987x96.6088,76.4121x105.172,65x112.583,52.8758x118.761,40.1722x123.637,27.0285x127.159,13.5887x129.288,0x130,-13.5887x129.288,-27.0285x127.159,-40.1722x123.637,-52.8758x118.761,-65x112.583,-76.4121x105.172,-86.987x96.6088,-96.6088x86.987,-105.172x76.4121,-112.583x65,-118.761x52.8758,-123.637x40.1722,-127.159x27.0285,-129.288x13.5887,-130x0,-129.288x-13.5887,-127.159x-27.0285,-123.637x-40.1722,-118.761x-52.8758,-112.583x-65,-105.172x-76.4121,-96.6088x-86.987,-86.987x-96.6088,-76.4121x-105.172,-65x-112.583,-52.8758x-118.761,-40.1722x-123.637,-27.0285x-127.159,-13.5887x-129.288,0x-130,13.5887x-129.288,27.0285x-127.159,40.1722x-123.637,52.8758x-118.761,65x-112.583,76.4121x-105.172,86.987x-96.6088,96.6088x-86.987,105.172x-76.4121,112.583x-65,118.761x-52.8758,123.637x-40.1722,127.159x-27.0285,129.288x-13.5887,130x0 + +before_layer_gcode = +between_objects_gcode = +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +deretract_speed = 0 +end_gcode = M104 S0 ; turn off temperature\nM140 S0\nG91\nG1 Z10 E-5.0 F12000\nG90\nG28 \nM84 ; disable motors + +extruder_colour = "" +extruder_offset = 0x0 +gcode_flavor = repetier +inherits = +layer_gcode = +max_layer_height = 0 +max_print_height = 375 +min_layer_height = 0.07 +nozzle_diameter = 0.5 +octoprint_apikey = 1589B335DF114E36B8EC3B48EF13A167 +octoprint_cafile = +octoprint_host = rostock.makeict.org:80 +parking_pos_retraction = 92 +printer_settings_id = +retract_before_travel = 2 +retract_before_wipe = 0% +retract_layer_change = 0 +retract_length = 4 + +retract_length_toolchange = 10 +retract_lift = 0 +retract_lift_above = 0 +retract_lift_below = 0 +retract_restart_extra = 0.1 + +retract_restart_extra_toolchange = 0 +retract_speed = 40 +serial_port = +serial_speed = 250000 +silent_mode = 0 +single_extruder_multi_material = 0 +start_gcode = M104 S[temperature]\n\nM190 S[bed_temperature]\n\nM109 S[temperature]\n\nG28 + +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 0 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 + +printer_vendor = MakeICT +printer_model = ROSTOCKMAXV2 +printer_variant = 0.5 +default_print_profile = "Rostock" +default_filament_profile = "Rostock PLA" +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_MAKEICT\nPRINTER_MODEL_ROSTOCKMAXV2\n + +[printer:Creality] +bed_shape = 0x0,300x0,300x300,0x300 + +before_layer_gcode = +between_objects_gcode = +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +deretract_speed = 0 +end_gcode = G91\nG1 F1800 E-3\nG1 F3000 Z10\nG90\nG28 X0 Y0 ; home x and y axis\nM106 S0 ; turn off cooling fan\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors + +extruder_colour = "" +extruder_offset = 0x0 +gcode_flavor = marlin +inherits = +layer_gcode = +max_layer_height = 0 +max_print_height = 400 +min_layer_height = 0.07 +nozzle_diameter = 0.4 +octoprint_apikey = 927583B4A3E04962A259746406714310 +octoprint_cafile = +octoprint_host = creality.makeict.org +parking_pos_retraction = 92 +printer_settings_id = +retract_before_travel = 2 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 5 +retract_length_toolchange = 10 +retract_lift = 0 +retract_lift_above = 0 +retract_lift_below = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 40 +serial_port = +serial_speed = 250000 +silent_mode = 0 +single_extruder_multi_material = 0 +start_gcode = G28 ;Home\nG1 Z15.0 F6000 ;Move the platform down 15mm\n;Prime the extruder\nG92 E0\nG1 F200 E3\nG92 E0\n + +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 0 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 + +printer_vendor = MakeICT +printer_model = CREALITYCR10S +printer_variant = 0.4 +default_print_profile = "Creality" +default_filament_profile = "Creality PLA" +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_MAKEICT\nPRINTER_MODEL_CREALITYCR10S\n + + +[printer:Prusa_] +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n +between_objects_gcode = +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +deretract_speed = 0 +end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors +extruder_colour = #FFFF00 +extruder_offset = 0x0 +gcode_flavor = marlin +inherits = +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +max_layer_height = 0.25 +max_print_height = 210 +min_layer_height = 0.07 +nozzle_diameter = 0.4 +octoprint_apikey = 2964E3F26CE1499F8937E440A3612067 +octoprint_cafile = +octoprint_host = prusa.makeict.org +parking_pos_retraction = 92 +printer_settings_id = +retract_before_travel = 1 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 0.8 +retract_length_toolchange = 4 +retract_lift = 0.6 +retract_lift_above = 0 +retract_lift_below = 209 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 35 +serial_port = +serial_speed = 250000 +silent_mode = 0 +single_extruder_multi_material = 0 +start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif} +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 + +printer_vendor = MakeICT +printer_model = PRUSAI3MK3 +printer_variant = 0.4 +default_print_profile = "Prusa - Standard" +default_filament_profile = "Prusa PLA" +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_MAKEICT\nPRINTER_MODEL_PRUSAI3MK3\n \ No newline at end of file diff --git a/live/PrusaResearch/index.idx b/live/PrusaResearch/index.idx index 419fc74..1fc9b18 100644 --- a/live/PrusaResearch/index.idx +++ b/live/PrusaResearch/index.idx @@ -1,3 +1,4 @@ +10.0.21 Fix Prusa PETG Cost 10.0.20 Add Prusa PETG Profile 10.0.19 Disable silent mode for all printers 10.0.18 Fix Creality PETG Compatibility