diff --git a/modules.available/13_openwrt_hostname.sh b/modules.available/13_openwrt_hostname.sh
index de510bb..bbe24f3 100644
--- a/modules.available/13_openwrt_hostname.sh
+++ b/modules.available/13_openwrt_hostname.sh
@@ -10,7 +10,7 @@
 MODULE_LIST="$MODULE_LIST openwrt_hostname"
 
 openwrt_hostname_myself="openwrt_hostname"       #contains the name of the module
-openwrt_hostname_config_file="hostname.txt"
+openwrt_hostname_config_file="system_hostname.txt"
 
 # Read configuration out of the system and save it to openwrt_hostname_system_config depending on the 
 #   parameter
diff --git a/modules.available/51_piratebox_node_ip.sh b/modules.available/51_piratebox_node_ip.sh
new file mode 100644
index 0000000..72527d8
--- /dev/null
+++ b/modules.available/51_piratebox_node_ip.sh
@@ -0,0 +1,57 @@
+#!/bin/sh
+#
+#   AutoConfiguration via USB file
+#
+#      Prints out the PirateBox Node IP and changes it
+#        DOES NOT change  IP in OPENWRT network config
+#
+# Available global variables
+#     CONFIG_TMP_STORE
+#     CONFIG_STORE
+
+
+#uncommend the following line for REAL modules
+MODULE_LIST="$MODULE_LIST piratebox_node_ip"
+
+piratebox_node_ip_myself="piratebox_node_ip"       #contains the name of the module
+piratebox_node_ip_config_file="piratebox_node_ip.txt"
+
+node_config=/opt/piratebox/conf/node.conf
+
+# Read configuration out of the system and save it to piratebox_node_ip_system_config depending on the 
+#   parameter
+func_read_system_config_piratebox_node_ip() {
+	local path=$1 ; shift
+
+	echo "Extracting Node-IPv6 IP parameter from $node_config"
+	config_line=$(grep NODE_IPV6_IP=\" $node_config )
+	#extract value
+	config_line=${config_line#NODE_IPV6_IP=\'}
+	config_value=${config_line%\'}
+
+	echo $config_value  >  $path/$piratebox_node_ip_config_file
+}
+
+# Parse the first parameter with the changed value
+#  do the stuff you need to do for changing the configuratioj
+func_set_system_config_piratebox_node_ip(){
+	local value=$1 ; shift
+	local old_value=$1; shift
+
+	echo "Changing PirateBox node ipv6 ip ..."
+	sed "s|NODE_IPV6_IP='$old_value'|NODE_IPV6_IP='$value'|" -i $node_config
+
+}
+
+
+#This function is called to compare content and et differences
+#  to initiate a restart in the end, set "changed=1"
+#  the easiest comparison can be used with auto_default_compare
+#  see below
+func_compare_and_set_piratebox_node_ip(){
+
+        auto_config_lookup_and_set  "$piratebox_node_ip_myself" \
+                "$cfg_auto_folder/$piratebox_node_ip_config_file" \
+                "$cfg_tmp_folder/$piratebox_node_ip_config_file"
+
+}
diff --git a/modules.available/60_librarybox_ftpsync.sh b/modules.available/60_librarybox_ftpsync.sh
index 6e40c81..e639f2a 100644
--- a/modules.available/60_librarybox_ftpsync.sh
+++ b/modules.available/60_librarybox_ftpsync.sh
@@ -17,7 +17,7 @@ librarybox_ftpsync_config_file="librarybox_ftpsync.txt"
 
 # FTP configuration is currently located in the hook
 #librarybox_config=/opt/piratebox/conf/piratebox.conf
-ftp_config=/opt/piratebox/conf/ftp/ftp.conf
+ftp_config=/opt/piratebox/conf/hook_custom.conf
 
 # Read configuration out of the system and save it to librarybox_ftpsync_system_config depending on the 
 #   parameter
@@ -25,9 +25,9 @@ func_read_system_config_librarybox_ftpsync() {
 	local path=$1 ; shift
 
 	echo "Extracting FTP-Sync parameter from $ftp_config"
-	config_line=$(grep ENABLE_SYNC=\" $ftp_config )
+	config_line=$(grep FTP_SYNC_ENABLED=\" $ftp_config )
 	#extract value
-	config_line=${config_line#ENABLE_SYNC=\"}
+	config_line=${config_line#FTP_SYNC_ENABLED=\"}
 	config_value=${config_line%\"}
 
 	echo $config_value  >  $path/$librarybox_ftpsync_config_file
@@ -40,7 +40,7 @@ func_set_system_config_librarybox_ftpsync(){
 	local old_value=$1; shift
 
 	echo "Changing ftp-sync access for LibraryBox"
-	sed "s|ENABLE_SYNC=\"$old_value\"|ENABLE_SYNC=\"$value\"|" -i $ftp_config
+	sed "s|FTP_SYNC_ENABLED=\"$old_value\"|FTP_SYNC_ENABLED=\"$value\"|" -i $ftp_config
 
 }