Name		Name	Last commit message	Last commit date
parent directory ..
cmake		cmake
CMakeLists.txt		CMakeLists.txt
README.md		README.md
close_test.cpp		close_test.cpp
explicit_versus_implicit.cpp		explicit_versus_implicit.cpp
finish_test.cpp		finish_test.cpp
partial_zone_reset.cpp		partial_zone_reset.cpp
pure_read_test.cpp		pure_read_test.cpp
pure_reset.cpp		pure_reset.cpp
reset_inteference_appends.cpp		reset_inteference_appends.cpp
reset_inteference_reads.cpp		reset_inteference_reads.cpp
reset_inteference_writes.cpp		reset_inteference_writes.cpp
utils.cpp		utils.cpp

README.md

Install

Ensure SPDK is installed, custom or the submodule. When using the submodule built SPDK with:

cd submodules/spdk
sudo ./scripts//pkgdep.sh
./configure --with-lto --with-fio=../fio # We use fio from the submodule
make

Then built these tools with:

mkdir build && cd build
SPDK_PATH=../../submodules/spdk cmake ..
make

All tools are installed in ./bin

Use any of the generated tools, like close_test with:

sudo ./bin/close_test -t <traddr of the ZNS device>

Make sure the device is not attached to the kernel and SPDK is initialized, e.g. with:

cat /sys/block/<dev>/device/address # Copy this value to traddr
sudo PCI_ALLOWED=<traddr> ../submodules/spdk/scripts/setup.sh

close_test: measure performance of close operation, prints cost of closing implicitly and explicitly opened zones - and writing a closed zone.
explicit_versus_implicit: measure performance of writing/appending to an implicitly/explicitly opened zone
finish_test: measure finish latency (partial zones) and resetting finished zones
partial_zone_reset: measure latency of resetting (partial) zones
pure_read_test: measure random read latency (sanity)
pure_reset: measure latency of resetting full zones
reset_inteference_writes: measure interference effects between resets and writes
reset_inteference_appends: measure interference effects between resets and appends
reset_inteference_reads: measure interference effects between resets and random reads