From 9bd0d4757696375e946a1410fcc8036d2670ae30 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Thu, 14 Nov 2024 13:01:21 -0500 Subject: [PATCH] rp2040: Improve indentation in Kconfig file Signed-off-by: Kevin O'Connor --- src/rp2040/Kconfig | 68 +++++++++++++++++++++++----------------------- 1 file changed, 34 insertions(+), 34 deletions(-) diff --git a/src/rp2040/Kconfig b/src/rp2040/Kconfig index 523ab6d9ada8..5ec7c918b96d 100644 --- a/src/rp2040/Kconfig +++ b/src/rp2040/Kconfig @@ -116,40 +116,40 @@ config RP2040_STAGE2_CLKDIV ###################################################################### choice - prompt "Communication Interface" - config RPXXXX_USB - bool "USBSERIAL" - select USBSERIAL - config RPXXXX_SERIAL_UART0_PINS_0_1 - bool "UART0 on GPIO0/GPIO1" - select SERIAL - config RPXXXX_SERIAL_UART0_PINS_12_13 - bool "UART0 on GPIO12/GPIO13" if LOW_LEVEL_OPTIONS - select SERIAL - config RPXXXX_SERIAL_UART0_PINS_16_17 - bool "UART0 on GPIO16/GPIO17" if LOW_LEVEL_OPTIONS - select SERIAL - config RPXXXX_SERIAL_UART0_PINS_28_29 - bool "UART0 on GPIO28/GPIO29" if LOW_LEVEL_OPTIONS - select SERIAL - config RPXXXX_SERIAL_UART1_PINS_4_5 - bool "UART1 on GPIO4/GPIO5" if LOW_LEVEL_OPTIONS - select SERIAL - config RPXXXX_SERIAL_UART1_PINS_8_9 - bool "UART1 on GPIO8/GPIO9" if LOW_LEVEL_OPTIONS - select SERIAL - config RPXXXX_SERIAL_UART1_PINS_20_21 - bool "UART1 on GPIO20/GPIO21" if LOW_LEVEL_OPTIONS - select SERIAL - config RPXXXX_SERIAL_UART1_PINS_24_25 - bool "UART1 on GPIO24/GPIO25" if LOW_LEVEL_OPTIONS - select SERIAL - config RPXXXX_CANBUS - bool "CAN bus" - select CANSERIAL - config RPXXXX_USBCANBUS - bool "USB to CAN bus bridge" - select USBCANBUS + prompt "Communication Interface" + config RPXXXX_USB + bool "USBSERIAL" + select USBSERIAL + config RPXXXX_SERIAL_UART0_PINS_0_1 + bool "UART0 on GPIO0/GPIO1" + select SERIAL + config RPXXXX_SERIAL_UART0_PINS_12_13 + bool "UART0 on GPIO12/GPIO13" if LOW_LEVEL_OPTIONS + select SERIAL + config RPXXXX_SERIAL_UART0_PINS_16_17 + bool "UART0 on GPIO16/GPIO17" if LOW_LEVEL_OPTIONS + select SERIAL + config RPXXXX_SERIAL_UART0_PINS_28_29 + bool "UART0 on GPIO28/GPIO29" if LOW_LEVEL_OPTIONS + select SERIAL + config RPXXXX_SERIAL_UART1_PINS_4_5 + bool "UART1 on GPIO4/GPIO5" if LOW_LEVEL_OPTIONS + select SERIAL + config RPXXXX_SERIAL_UART1_PINS_8_9 + bool "UART1 on GPIO8/GPIO9" if LOW_LEVEL_OPTIONS + select SERIAL + config RPXXXX_SERIAL_UART1_PINS_20_21 + bool "UART1 on GPIO20/GPIO21" if LOW_LEVEL_OPTIONS + select SERIAL + config RPXXXX_SERIAL_UART1_PINS_24_25 + bool "UART1 on GPIO24/GPIO25" if LOW_LEVEL_OPTIONS + select SERIAL + config RPXXXX_CANBUS + bool "CAN bus" + select CANSERIAL + config RPXXXX_USBCANBUS + bool "USB to CAN bus bridge" + select USBCANBUS endchoice config RPXXXX_CANBUS_GPIO_RX