params.cfg

#
# Default parameters for Slitmask design tool
#
#
[DEFAULT]
ProjectName = "New Mask", "", "Project name", "Project name"
OutputFits = "mask.fits", "", "Output file", "Mask design file (FITS)"
Telescope = "Keck II", "", "Telescope", "Keck I or Keck II"
Instrument = "DEIMOS", "", "Instrument", "DEIMOS"

ObsDate = "2025-01-01", "", "Obs. Date", "Observation date and time"
Author = "Mask Designer <email@keck.hawaii.edu>", "", "Author", "Designer of mask"
Observer = "Observer Name <email@keck.hawaii.edu>", "", "Observer", "Observer name"

MaskId = "123456", "", "Mask. Id", "Mask identification number"
MaskName = "Mask Name", "", "Mask name", "Short name of the mask"

MinSlitLength = 10.0, "arcsec", "Min. slit length", "Minimum slit length (arcsec)"
MinSlitSeparation = 0.35, "arcsec", "Min. slit separation", "Min slit separatation (arcsec)"
SlitWidth = 1.00, "arcsec", "Slit width", "Slit width (arcsec)"
AlignBoxSize = 4.0, "arcsec", "Align box size", "Alignment box size (arcsec)"

BlueWaveLength = 4500, "&#x212B;", "Blue wavelength", "Shortest wavelength (&#x212B;)"
RedWaveLength = 9000, "&#x212B;", "Red wavelength", "Longest wavelength (&#x212B;)"
CenterWaveLength = 7000, "&#x212B;", "Center wavelength", "Center wavelength (&#x212B;)"

ProjSlitLength = "yes", "", "Project slit length", "Project slit length to preserver spatial direction [yes/no]"
NoOverlap = "yes", "", "Avoid overlap", "Adjust slit lengths to avoid overlap? [yes/no]"

Temperature = 0.0, "degC", "Temperature", "Temperature (degC)"
Pressure = 615.0, "hPa", "Pressure", "Atmospheric Pressure (hPa)"

MaskPA = 0.0, "deg", "Mask PA", "Position angle of field (deg)"
SlitPA = 0.0, "deg", "Slit PA", "Default slit angle (deg)"

InputRA = "00:00:00", "hr", "Input RA", "Input Right Ascension (hr)"
InputDEC = "00:00:00", "deg", "Input DEC", "Input Declination (deg)"
MaskMargin = 4, "arcsec", "Mark margin", "Mask margin (arcsec)"
HourAngle = 0.001, "hr", "Hour angle", "Hour angle (hour)"