On this page you will find description of every method in Karbowanec RPC Wallet (Payment Gate) API. Karbowanec RPC Wallet is a HTTP server which provides JSON 2.0 RPC interface for Karbowanec payment operations and address management. Each method has its own page that can be found by clicking on this method.

More on how to start and operate Karbowanec RPC Wallet can be found here: Karbowanec RPC Wallet

To make a JSON PRC request to your Karbowanec RPC Wallet you should use POST request that looks like this:

http://<service address>:<service port>/json_rpc

Where:

<service address> is an IP of Karbowanec RPC Wallet, if RPC Wallet is located on local machine it is either 127.0.0.1 or localhost,
<service port> is Karbowanec RPC Wallet port, by default it is binded to 8070 port, but it can be manually binded to any port you want, read more about this

Reset

reset() method allows you to re-sync your wallet.

Input.

Argument	Mandatory	Description	Format	Example
viewSecretKey	No	Private view key	string	4a2583e42d010e8aabfed22743789569714196246bf01b5f2fec35af9232d907
scanHeight	No	Height to start scan from	uint32_t	450000

No output in case of success.

Important: If the view_secret_key was not pointed out reset() methods resets the wallet and re-syncs it. If the view_secret_key argument was pointed out reset() method substitutes the existing wallet with a new one with a specified view_secret_key and creates an address for it.

Input value example:

{
  "params":{
     "viewSecretKey":"4a2583e42d010e8aabfed22743789569714196246bf01b5f2fec35af9232d907"
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"reset"
}

Output value example:

{
  "jsonrpc":"2.0",
  "id":"test",
  "result":{
  }
}

Get status

getStatus() method returns information about the current RPC Wallet state: block_count, known_block_count, last_block_hash, peer_count an minimal_fee.

No input.

Output:

Argument	Description	Format	Example
blockCount	Node's known number of blocks	uint32	123456
knownBlockCount	Maximum known number of blocks of all seeds that are connected to the node	uint32	123123
localDaemonBlockCount	Local (synchronized) blocks count	uint32	123123
lastBlockHash	Hash of the last known block	string	8a6f1cb7ed7a9db4751d7b283a0482baff20567173dbfae136c9bceb188e51c4
peerCount	Connected peers number	uint32	5
minimalFee	Current minimum transaction fee in atomic units. Do not use received value 'as is', but to round it up to one of two first digits after leading zeroes or double it to make sure tx will pass in case of minimalFee fluctuations.	uint64	15573245551
version	The version of the Payment Gate software	string	1.7.3.923-eb91ef4d9

Input example:

{
  "params":{
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"getStatus"
}

Output example:

{
 "id": "test",
 "jsonrpc": "2.0",
 "result": {
   "blockCount": 256739,
   "knownBlockCount": 256739,
   "lastBlockHash": "1ae2b3fd7351a84c775e3088869efcc8afe6424cc2bc0ba9bd448c542061099b",
   "minimalFee": 15645551732,
   "peerCount": 7
 }
}

Save

save() method allows you to save your wallet by request.

No input.

No output in case of success.

Input value example:

{
  "params":{
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"save"
}

Output value example:

{
  "jsonrpc":"2.0",
  "id":"test",
  "result":{
  }
}

Export

export() method allows you to export your wallet to the container file.

Input.

Argument	Mandatory	Description	Format	Example
fileName	Yes	Filename of container	string	FileName.wallet

No output in case of success.

Input value example:

{
  "jsonrpc": "2.0",
  "id": "test",
  "method": "export",
  "params":{
    "fileName":"FileName.wallet"
  }
}

Output value example:

{ "id": "test", "jsonrpc": "2.0", "result": {} }

Get view key

getViewKey() method returns your view key.

No input.

Output:

Argument	Description	Format	Example
viewSecretKey	Private view key	string	4a2583e42d010e8aabfed22743789569714196246bf01b5f2fec35af9232d907

Input Example:

{
  "params":{
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"getViewKey"
}

Return value example:

{
  "jsonrpc":"2.0",
  "id":"test",
  "result":{
    "viewSecretKey":"4a2583e42d010e8aabfed22743789569714196246bf01b5f2fec35af9232d907"
  }
}

Get spend keys

getSpendKeys() method returns your spend keys.

Argument	Mandatory	Description	Format	Example
address	Yes	Valid and existing in this container address	string	KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt

Output:

Argument	Description	Format	Example
spendSecretKey	Private spend key	string	4a2583e42d010e8aabfed22743789569714196246bf01b5f2fec35af9232d907
spendPublicKey	Public spend key	string	4a2583e42d010e8aabfed22743789569714196246bf01b5f2fec35af9232d907

Input Example:

{
  "params":{
     "address":"KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt"
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"getSpendKeys"
}

Return value example:

{
  "jsonrpc":"2.0",
  "id":"test",
  "result":{
     "spendSecretKey":"4a2583e42d010e8aabfed22743789569714196246bf01b5f2fec35af9232d907"
     "spendPublicKey":"4a2583e42d010e8aabfed22743789569714196246bf01b5f2fec35af9232d907"
  }
}

Get mnemonic seed

getMnemonicSeed() method returns your first address' spend secret key and derived from this spend key common private view key of the container if it was created with option --deterministic.

Argument	Mandatory	Description	Format	Example
address	Yes	Valid deterministic address that exists in this container	string	KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt

Output:

Argument	Description	Format	Example
mnemonicSeed	Mnemonic seed consisting of 25 words	string	testing sifting swallow pastry skin rogue jaded extra ...

Input Example:

{
  "params":{
     "address":"KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt"
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"getMnemonicSeed"
}

Return value example:

{
  "id": "test",
  "jsonrpc": "2.0",
  "result": {
    "mnemonicSeed": "testing sifting swallow pastry skin rogue jaded extra  ..."
  }
}

Get addresses

getAddresses() method returns an array of your RPC Wallet's addresses.

No input.

Output:

Argument	Description	Format	Example
addresses	Array of strings, where each strings is an address	array	See below

Input example:

{
  "params":{
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"getAddresses"
}

Output example:

{
  "jsonrpc":"2.0",
  "id":"test",
  "result":{
     "addresses":[
        "KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt",
        "KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt"
     ]
  }
}

Create address

createAddress() method creates an additional address in your wallet.

Input:

Argument	Mandatory	Description	Format
secretSpendKey	No	Private spend key. If secretSpendKey was specified, RPC Wallet creates spend address	string
publicSpendKey	No	Public spend key. If publicSpendKey was specified, RPC Wallet creates view address	string
scanHeight	No	Height from which start synchronization	uint32
reset	No	Determines whether reset wallet or not on address creation with spendKey. By default is true - do reset (old behavior)	boolean

Note: If none of the above mentioned parameters were specified, RPC Wallet creates spend address with generated spend key.

Note: both above mentioned keys in parameters can't be present in a single request

Output:

Argument	Description	Format	Example
address	Created address	string	KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt

Input value example:

{
  "params":{
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"createAddress"
}

Output value example:

{
  "jsonrpc":"2.0",
  "id":"test",
  "result":{
     "address":"KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt"
  }
}

Create address list

createAddressList() method creates additional addresses in your wallet from the provided list of private keys.

Input:

Argument	Mandatory	Description	Format	Example
spendSecretKeys	Yes	Array of strings, where each string is a Private spend key.	array	"spendSecretKeys":["fe44fef481ba7f1a309754fcd2dd783090059b4154cf2c6667d7eac5ce00cc0c", "871cf3c3b784959d2b2a0e976328b8b814dc3a381853338471f0fb7c13213801", "a7ecbe49b33dd3f13af7c9c704a0818f139fb7b78c0dc3f82e3050788aac9659"]
scanHeights	No	Array of uint32, where each is a height to start synchronization from
reset	No	Determines whether reset wallet or not on address creation with spendKey. By default is true - do reset (old behavior)	boolean

Output:

Argument	Description	Format	Example
addresses	Array of strings, where each string is a created address	array	["Kbb4JYUXJUEjPAWxuoCyVTTbtVbs32Fp22v3Kby9ziWVLJyYbqSXjadcSrHuZw91eYfQFzRtGfTemReSSMN4kE445fJGbu5", "KaAzzYLbBUQUG4a2b1QQVTHsDaEh7TR5UbC7HSBDZqJgFTe3CRhE6pdcSrHuZw91eYfQFzRtGfTemReSSMN4kE445gSzDQv", "KiFxnevgyWcE6MuTCcqyryFoMyTtMqGvEU4zsULJgWxdSLDm6tvHdDFcSrHuZw91eYfQFzRtGfTemReSSMN4kE445e1uh9P"]

Input value example:

{
  "jsonrpc": "2.0",
  "id": "test",
  "method": "createAddressList",
  "params":{
    "reset":false,
    "spendSecretKeys":["fe44fef481ba7f1a309754fcd2dd783090059b4154cf2c6667d7eac5ce00cc0c", "871cf3c3b784959d2b2a0e976328b8b814dc3a381853338471f0fb7c13213801", "a7ecbe49b33dd3f13af7c9c704a0818f139fb7b78c0dc3f82e3050788aac9659"]
  }
}

Output value example:

{
  "id": "test",
  "jsonrpc": "2.0",
    "result": {
    "addresses": [
      "Kbb4JYUXJUEjPAWxuoCyVTTbtVbs32Fp22v3Kby9ziWVLJyYbqSXjadcSrHuZw91eYfQFzRtGfTemReSSMN4kE445fJGbu5",
      "KaAzzYLbBUQUG4a2b1QQVTHsDaEh7TR5UbC7HSBDZqJgFTe3CRhE6pdcSrHuZw91eYfQFzRtGfTemReSSMN4kE445gSzDQv",
      "KiFxnevgyWcE6MuTCcqyryFoMyTtMqGvEU4zsULJgWxdSLDm6tvHdDFcSrHuZw91eYfQFzRtGfTemReSSMN4kE445e1uh9P"
    ],
  }
}

Delete address

deleteAddress() method deletes a specified address.

Input:

Argument	Mandatory	Description	Format	Example
address	Yes	An address to be deleted.	string	KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt

Output:

In case of success returns an empty JSON object.

Input example:

{
  "params":{
     "address":"KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt"
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"deleteAddress"
}

Output example:

{
  "jsonrpc":"2.0",
  "id":"test",
  "result":{
  }
}

Get balance

getBalance() method returns a balance for a specified address.

Please note: If address is not specified, returns a cumulative balance of all RPC Wallet's addresses.

Input:

Argument	Mandatory	Description	Format	Example
address	No	Valid and existing address in this particular wallet	string	KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt

Output:

Argument	Description	Format	Example
availableBalance	Available balance of the specified address	uint64	123123
lockedAmount	Locked amount of the specified address	uint64	123123

Input example:

{
  "params":{
     "address":"KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt"
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"getBalance"
}

Output example:

{
  "jsonrpc":"2.0",
  "id":"test",
  "result":{
     "lockedAmount":210,
     "availableBalance":110
  }
}

Get block hashes

getBlockHashes() method returns an array of block hashes for a specified block range.

Input:

Argument	Mandatory	Description	Format	Example
firstBlockIndex	Yes	Starting height	uint32	123123
blockCount	Yes	Number of blocks to process	uint32	20

Output:

Argument	Description	Format	Example
blockHashes	Array of strings, where each element is a block hash	array	example

Input example:

{ 
  "params":{
     "blockCount":11,
     "firstBlockIndex":0
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"getBlockHashes"
}

Output example:

{
  "jsonrpc":"2.0",
  "id":"test",
  "result":{
     "blockHashes":[
        "8a6f1cb7ed7a9db4751d7b283a0482baff20567173dbfae136c9bceb188e51c4",
        "657cd1c33df7f4250d581c97db665cb4a1856ebfadd6efabaeab745c2c76b1be",
        "21047174f74576b6722e72646d7bd553e17d7c9f07fef05151bb1f9df7ed9dd8",
        "504b9bfb2cd34531551cb2d68ea3e34e030d991164589ba7ed24e16fed3ea374",
        "d9d36b5226d11b2cf60e3cf2038b21032c4ac753eabc32fbdd506158f95a69ca",
        "171be105f8e39729838144c78ced336d0ebc29a4bd2c7a22901c0e8c0eaabb42",
        "5f7933bd0257649a44e571d59a9f4083297acbdd338c1c0094a7226ade8d0f0f",
        "967fd52a57e8193f56329bb37abdddce717098429f62c00776342c605a28e19b",
        "6b1a21634a3d72821c43a244af16098eba7c0a59a2e409efa38bd420702f7594",
        "7bb5ca944c5f916f80d50246f48789cc4605efd166efc2308553fe0d208fbe12",
        "83dfef7c288121d87e60f52c74d3da6b422d4b8581ce732ef8b54273bd6c4f45"
     ]
  }
}

Get transaction hashes

getTransactionHashes() method returns an array of block and transaction hashes.

Transaction consists of transfers. Transfer is an amount-address pair. There could be several transfers in a single transaction.

Input:

Argument	Mandatory	Description	Format	Example
addresses	No	Array of strings, where each string is an address	array	KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt
blockHash	Only one of these parameters (blockHash or firstBlockIndex) is allowed.	Hash of the starting block	string	f8f07ace392474bfbdc0fc30749a45f779a8aea10c489a103270f63ed88178ad
firstBlockIndex	Only one of these parameters (blockHash or firstBlockIndex) is allowed.	Starting height	uint32	123123
blockCount	Yes	Number of blocks to return transaction hashes from	uint32	20
paymentId	No	Valid payment_id	string	somePaymentId

Note: if paymentId parameter is set, getTransactionHashes() method returns transaction hashes of transactions that contain specified payment_id. (in the set block range)

Note: if addresses parameter is set, getTransactionHashes() method returns transaction hashes of transactions that contain transfer from at least one of specified addresses.

Note: if both above mentioned parameters are set, getTransactionHashes() method returns transaction hashes of transactions that contain both specified payment_id and transfer from at least one of specified addresses.

Output:

Argument	Description	Format	Example
items	Array that contains: `blockHash` - string - hash of the block which contains transaction hashes; `transactionHashes` - array - array of strings, where each string is a transaction hash	array	See below

Input example:

{ 
  "params":{
     "blockCount":100,
     "firstBlockIndex":0,
     "addresses":[
        "KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt"
     ]
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"getTransactionHashes"
}

Output example:

{
  "jsonrpc":"2.0",
  "id":"test",
  "result":{
     "items":[
        {
           "transactionHashes":[
               957dcbf54f327846ea0c7a16b2ae8c24ba3fa8305cc3bbc6424e85e7d358b44b
               25bb751814dd39bf46c972bd760e7516e34200f5e5dd02fda696671e11201f78
           ],
           "blockHash":"8a6f1cb7ed7a9db4751d7b283a0482baff20567173dbfae136c9bceb188e51c4"
        }
     ]
  }
}

Get transactions

getTransactions() method returns an array of block and transaction hashes.

Transaction consists of transfers. Transfer is an amount-address pair. There could be several transfers in a single transaction.

Input:

Argument	Mandatory	Description	Format	Example
addresses	No	Array of strings, where each string is an address	array	See below
blockHash	Only one of these parameters (blockHash or firstBlockIndex) is allowed.	Hash of the starting block	string	8fa07712cbf22c263834c0ac9a3f05058856a1fa7fa3d3eda332f63519b23bd1
firstBlockIndex	Only one of these parameters (blockHash or firstBlockIndex) is allowed.	Starting height	uint32	123123
blockCount	Yes	Number of blocks to return transaction hashes from	uint32	20
paymentId	No	Valid payment_id	string	somePaymentId

Note: if paymentId parameter is set, getTransactions() method returns transactions that contain specified payment_id. (in the set block range)

Note: if addresses parameter is set, getTransactions() method returns transactions that contain transfer from at least one of specified addresses.

Note: if both above mentioned parameters are set, getTransactions() method returns transactions that contain both specified payment_id and transfer from at least one of specified addresses.

Output:

Argument	Description	Format	Example
items	Array that contains: `block_hash` - string - hash of the block which contains a transaction; `transactions` - array - contains (see table below)	array	See below

Argument	Format	Description
transactionHash	string	hash of the transaction
blockIndex	uint32	number of the block that contains a transaction
confirmations	uint32	number of confirmations
timestamp	uint64	timestamp of the transaction
isBase	boolean	shows if the transaction is a coinbase transaction or not
unlockTime	uint64	height of the block when transaction is going to be available for spending
amount	int64	amount of the transaction
fee	uint64	transaction fee
extra	string
paymentId	string	payment_id of the transaction (optional)
transfers	array	`address` - string; `amount` - int64

Input example:

{
  "params":{
     "blockCount":1000,
     "firstBlockIndex":1,
     "addresses":[
        "KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt",
        "KegWNCZv8CQ5YoUZFLAUpxQhHt9FAo5KhXBEaHGTeaDD1t5ZZsKoEMQ8sgUMcyKbwpFJGaaY73Bwf3bUXVLsgAZa7nCv85k",
        "KiQ5AonXm7saDTsNEi9uJsb5HswnafrsVLn2vWT1PGGTi1KFbJypdqs7xWrdU54ieXcdQtiV1bDAcVZjYjwFg41v9v7x869"
     ],
     paymentId:"somePaymentId"
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"getTransactions"
}

Output example:

{
  "jsonrpc":"2.0",
  "id":"test",
  "result":{  
     "items":[
        {
           "blockHash":"01bd06ca731914f27e143bbb902ce0bc05bff13d76faa027ea817e68f217488c",
           "transactions":[
              {
                 "fee":-70368475742208,
                 "extra":"0127cea59bfadc49aa02ed4a225936671e55607b5241621abca2a5e14405906dbb",
                 "timestamp":1446029698,
                 "blockIndex":1,
                 "state":0,
                 "transactionHash":"06ec210a8359f253f8b2160a0d6040cf89f2a05a553aaa577b7f508ee5d831f9",
                 "amount":70368475742208,
                 "unlockTime":11,
                 "transfers":[
                    {
                       "amount":70368475742208,
                       "type":0,
                       "address":"KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt"
                    }
                 ],
                 "paymentId":"",
                 "isBase":True
              }
           ]
        },
        {
           "blockHash":"28aa7d32f4274f6387969d7671bd4db98fd871bf0dd510a1df5e2ef4b1d41a35",
           "transactions":[
              {
                 "fee":-70368207307776,
                 "extra":"01a8e6e408282b2ddf343e20d5e9aab283723ba10ab7ab7b3131f6981b02a84431",
                 "timestamp":1446029698,
                 "blockIndex":2,
                 "state":0,
                 "transactionHash":"922d00d2e6eaed63f62d8e3b968cb08b6ea5c555fe0e6af948ab06efe6eb213a",
                 "amount":70368207307776,
                 "unlockTime":12,
                 "transfers":[
                    {
                       "amount":70368207307776,
                       "type":0,
                       "address":"KfXkT5VmdqmA7bWqSH37p87hSXBdTpTogN4mGHPARUSJaLse6jbXaVbVkLs3DwcmuD88xfu835Zvh6qBPCUXw6CHK8koDCt"
                    }
                 ],
                 "paymentId":"",
                 "isBase":True
              }
           ]
        }
     ]
  }
}

Get unconfirmed transaction hashes

getUnconfirmedTransactionHashes() method returns information about the current unconfirmed transaction pool or for a specified addresses.

Transaction consists of transfers. Transfer is an amount-address pair. There could be several transfers in a single transaction.

Input:

Argument	Mandatory	Description	Format	Example
addresses	No	Array of strings, where each string is a valid address	array	See below

Note: if addresses parameter is set, getUnconfirmedTransactionHashes() method returns transactions that contain transfer from at least one of specified addresses.

Output:

Argument	Description	Format	Example
transactionHashes	Array of strings, where each string is a hash of an unconfirmed transaction	array	See below

Input example:

{
  "params":{
     "addresses":[
        "KdbDPifEfmQDZAxMxjrkbPPLHtwv1ezGr2GRB3P377ecToxGkrTFTe2EEjAKbhPqA61FPTi14UpkMVMh2pn1et1y8PdDwn4",
        "KfBV6ryfQdrNFhQ3pwnWw21mKomejKpdVj8diVdu5nAdYh7vft5JcMHjMshEcAqAJGaUSmDvTPKTtSWyGxc52R1c4JFVKUP",
        "KdA226MT2R3CtZH6oVHVQJ3J1j6HS7ircHNrJMvSb3tRTqnGEBjqojdUHzPKRigkjecw1iwW15qRp4bWvV2dTuz8QNMdAU8"
     ]
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"getUnconfirmedTransactionHashes"
}

Output example:

{
  "jsonrpc":"2.0",
  "id":"test",
  "result":{
     "transactionHashes":[
        ...,
        ...,
        ...
     ]
  }
}

Get transaction

getTransaction() method returns information about a particular transaction.

Transaction consists of transfers. Transfer is an amount-address pair. There could be several transfers in a single transaction.

Input:

Argument	Mandatory	Description	Format	Example
transactionHash	Yes	Hash of the requested transaction	string	example

Output:

Argument	Description	Format	Example
transaction	Contains (see table below)	array	See below

Argument	Format	Description
transactionHash	string	hash of the transaction
blockIndex	uint32	number of the block that contains a transaction (optional)
timestamp	uint64	timestamp of the transaction (optional)
isBase	boolean	shows if the transaction is a coinbase transaction or not
unlockTime	uint64	height of the block when transaction is going to be available for spending
amount	int64	amount of the transaction
fee	uint64	transaction fee
extra	string
paymentId	string	payment_id of the transaction (optional)
transfers	array	contains `address` - string; `amount` - int64

Input example:

{
  "params":{
     "transactionHash":"92423b0857d36bd172b3f2effbd47ea477bfe0618a50c29d475542c6d5d1b835"
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"getTransaction"
}

Output example:

{
  "jsonrpc":"2.0",
  "id":"test",
  "result":{
     "transaction":{
        "fee":1000000,
        "extra":"0130b4472974f2deb9fae7d8fd6602b26396379f3fa05cca2430e10e9e60179f42",
        "timestamp":0,
        "blockIndex":4294967295,
        "state":0,
        "transactionHash":"92423b0857d36bd172b3f2effbd47ea477bfe0618a50c29d475542c6d5d1b835",
        "amount":-1703701,
        "unlockTime":0,
        "transfers":[
           {
              "amount":123456,
              "type":0,
              "address":"KiQxu9U3F7vdGggu4NQ3CKDhk59vMQyMaFbLtu7TU4TdUkNtuJufqpo67r2e5j5p44SBsBBygaRdmeB4gwH9CF1C3zufGWd"
           },
           {
              "amount":234567,
              "type":0,
              "address":"KccShmn49D4JZED1g4CM98RpszuMbbDEaYNVpCWjUkDuWPVpo8EEUHaReKeHBmpoNdTENs841QUBRNitFHD7W29oDVfV9ze"
           },
           {
              "amount":345678,
              "type":0,
              "address":"KfCPBzzR28edvZqLv6t8XVY98jeK6YEjS3birBPTHjY1hXSFM5k5pjUNSur6UhbP8EaqhZ69PVJF991KqCtYFox7NUSvcjw"
           }
        ],
        "paymentId":"",
        "isBase":False
     }
  }
}

Send transaction

sendTransaction() method allows you to send transaction to one or several addresses. Also, it allows you to use a payment_id for a transaction to a single address.

Input:

Argument	Mandatory	Description	Format	Example
addresses	No	Array of strings, where each string is an address to take the funds from	array	See below
transfers	Yes	Array that contains: `address` - string; `amount` - int64	array	"amount": 10000000000, "address": "Kcpg4B4kjwefDeBHGyRdUbgeq5FSYHCof7db8uj6dkFAjkvLSQBc3J7iDSwFx75TUj6MnDYKM5Eu3UmtaAJhvEjdKw1Jkz5"
fee	Yes	Transaction fee. Minimal fee in Karbowanec network is .0001 KRB. This parameter should be specified in minimal available KRB units. For example, if your fee is .01 KRB, you should pass it as 10000000000	uint64	1000000
unlockTime	No	Height of the block until which transaction is going to be locked for spending.	uint64	0
anonymity	Yes	Privacy level (a discrete number from 1 to infinity). Level 6 and higher is recommended.	uint64	6
extra	No	String of variable length. Can contain A-Z, 0-9 characters.	string
paymentId	No	payment_id	string	somePaymentId
changeAddress	No	Valid and existing in this container address.	string	KaUMDHkTqSpaDBtK2pZc4MDaveb2DhQfYiUZ2ACy7evsKYYwWefrvhy34RHNChptMPbefT387qpH7MGkWCsdQJAeGpjmhfz

Note: if container contains only 1 address, changeAddress field can be left empty and the change is going to be sent to this address

Note: if addresses field contains only 1 address, changeAddress can be left empty and the change is going to be sent to this address

Note: in the rest of the cases, changeAddress field is mandatory and must contain an address.

Output:

Argument	Description	Format	Example
transactionHash	Hash of the sent transaction.	string	93faedc8b8a80a084a02dfeffd163934746c2163f23a1b6022b32423ec9ae08f

Input Example:

{  
  "params":{  
     "anonymity":0,
     "fee":1000000,
     "unlockTime":0,
     "paymentId":"somePaymentId",
     "addresses":[  
        "KbzvFzjQeWCZawinhkDZUKF6pjDv1TLU678poSAEFKWRL3kgWk48sxCN8z6tpfkzMZ82AQyfhiU4uZ66mnU942AHKokr6PG",
        "KiHzZqEzezyaZCP5AdZ1v6K1dAi5aBrU3E9czrZbS6whPUVDBLPLdqU4aiLviNUFfXMEh2kQwSEJGBNpegY6To4wQ9aBwDU",
        "KacpStR6z373JoBgBAVoUch9C1Uzbp3p3e95NJkZtcGPe7sJ3AZNzfzL1qzh7zqvekDxvBZepZGqcRsa7MhCmP3NL27GH5V"
     ],
     "transfers":[  
        {  
           "amount":123456,`
           "address":"KbjVbfZkw5eYMMBBYCEoc3TtMe6yNQgPvSepH1KRqxhc3Pr2VBtFLrtD1E6oQAEbtJQsbJrtqWjMoKo1q5HtKAFdUcYBH41"
        },
        {  
           "amount":234567,
           "address":"Kis97C9AM1PQataUmbpjmXbZz2KSynxgURYb8moceDPXVWBwt4pjGtvAmfY3qmhcrBZgyKfLGnhGCW8LxBHGiDrrC5GLjhD"
        },
        {  
           "amount":345678,
           "address":"KdAzF8benG4aygdY5v5R5j8bLrzN1hSTfb2c8UneNbNW1VB4QnWD7SSPGpne17HGiLhid1VGq73B3Wc6ZWLaq2GZEaw9hrc"
        }
     ],
     "changeAddress":"KbzvFzjQeWCZawinhkDZUKF6pjDv1TLU678poSAEFKWRL3kgWk48sxCN8z6tpfkzMZ82AQyfhiU4uZ66mnU942AHKokr6PG"
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"sendTransaction"
}

Return value example:

{  
  "jsonrpc":"2.0",
  "id":"test",
  "result":{  
     "transactionHash":"93faedc8b8a80a084a02dfeffd163934746c2163f23a1b6022b32423ec9ae08f"
  }
}

Estimate fusion

estimateFusion() method counts the number of unspent outputs of the specified addresses and returns how many of those outputs can be optimized.

This method is used to understand if a fusion transaction can be created. If fusionReadyCount returns a value = 0, then a fusion transaction cannot be created.

Input:

Argument	Mandatory	Description	Format	Example
threshold	Yes	Value that determines which outputs will be optimized. Only the outputs, lesser than the threshold value, will be included into a fusion transaction.	uint64	1000000
addresses	No	Array of strings, where each string is an address to take the funds from.	array	See below

Output:

Argument	Description	Format	Example
totalOutputCount	Total number of unspent outputs of the specified addresses.	uint64	1000
fusionReadyCount	Number of outputs that can be optimized.	uint64	50

Input example:

{  
  "params":{  
     "threshold":1000000,
     "addresses":[  
        "Kis97C9AM1PQataUmbpjmXbZz2KSynxgURYb8moceDPXVWBwt4pjGtvAmfY3qmhcrBZgyKfLGnhGCW8LxBHGiDrrC5GLjhD",
        "KdAzF8benG4aygdY5v5R5j8bLrzN1hSTfb2c8UneNbNW1VB4QnWD7SSPGpne17HGiLhid1VGq73B3Wc6ZWLaq2GZEaw9hrc",
        "KbzvFzjQeWCZawinhkDZUKF6pjDv1TLU678poSAEFKWRL3kgWk48sxCN8z6tpfkzMZ82AQyfhiU4uZ66mnU942AHKokr6PG"
     ]
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"estimateFusion"
}

Output example:

{
  "jsonrpc":"2.0",
  "id":"test",
  "result":{  
     "totalOutputCount":1000,
     "fusionReadyCount":50
  }`
}

Send fusion transaction

sendFusionTransaction() method allows you to send a fusion transaction, by taking funds from selected addresses and transferring them to the destination address.

If there aren't any outputs that can be optimized, sendFusionTransaction() will return an error. You can use estimateFusion to check the outputs, available for the optimization.

Input:

Argument	Mandatory	Description	Format	Example
threshold	Yes	Value that determines which outputs will be optimized. Only the outputs, lesser than the threshold value, will be included into a fusion transaction.	uint64	1000000
anonymity	Yes	Privacy level (a discrete number from 1 to infinity). Level 6 and higher is recommended.	uint64	6
addresses	No	Array of strings, where each string is an address to take the funds from.	array	See below
destinationAddress	No	An address that the optimized funds will be sent to. Valid and existing in this container address.	string	Kis97C9AM1PQataUmbpjmXbZz2KSynxgURYb8moceDPXVWBwt4pjGtvAmfY3qmhcrBZgyKfLGnhGCW8LxBHGiDrrC5GLjhD

Note: if container contains only 1 address, destinationAddress field can be left empty and the funds are going to be sent to this address.

Note: if addresses field contains only 1 address, destinationAddress can be left empty and the funds are going to be sent to this address.

Note: in the rest of the cases, destinationAddress field is mandatory and must contain an address.

Output:

Argument	Description	Format	Example
transactionHash	Hash of the sent transaction.	string	93faedc8b8a80a084a02dfeffd163934746c2163f23a1b6022b32423ec9ae08f

Input Example:

{  
  "params":{  
     "anonymity":6,
     "threshold":1000000,
     "addresses":[  
        "Kis97C9AM1PQataUmbpjmXbZz2KSynxgURYb8moceDPXVWBwt4pjGtvAmfY3qmhcrBZgyKfLGnhGCW8LxBHGiDrrC5GLjhD",
        "KdAzF8benG4aygdY5v5R5j8bLrzN1hSTfb2c8UneNbNW1VB4QnWD7SSPGpne17HGiLhid1VGq73B3Wc6ZWLaq2GZEaw9hrc",
        "KbzvFzjQeWCZawinhkDZUKF6pjDv1TLU678poSAEFKWRL3kgWk48sxCN8z6tpfkzMZ82AQyfhiU4uZ66mnU942AHKokr6PG"
     ],
     "destinationAddress":"Kak1Nwr16RtJ5M4wLVM7bnAXSMgimsgxiQtoSTXSBUrsQHQ6CbLKeXwimHyn2iqorN2DqL2b4HcaiJLvPmRbUMVXJTLqbjT"
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"sendFusionTransaction"
}

Return value example:

{  
  "jsonrpc":"2.0",
  "id":"test",
  "result":{  
     "transactionHash":"93faedc8b8a80a084a02dfeffd163934746c2163f23a1b6022b32423ec9ae08f"
  }
}

Validate address

validateAddress() method allows you to check if provided address is valid.

Input:

Argument	Mandatory	Description	Format	Example
Address	Yes	Address to validate	string	Kak1Nwr16RtJ5M4wLVM7bnAXSMgimsgxiQtoSTXSBUrsQHQ6CbLKeXwimHyn2iqorN2DqL2b4HcaiJLvPmRbUMVXJTLqbjT

Output:

Argument	Description	Format	Example
address	Parsed address.	string	Kak1Nwr16RtJ5M4wLVM7bnAXSMgimsgxiQtoSTXSBUrsQHQ6CbLKeXwimHyn2iqorN2DqL2b4HcaiJLvPmRbUMVXJTLqbjT
isValid	whether the address is valid or invalid	boolean	true
spendPublicKey	Public spend key	string	17d068a5d62767661597779af63b7938f1e723052a2d0b8ed8fc6680cde3f88b
viewPublicKey	Public view key	string	32c547698847b6f9b04bc9035a8d97074d2c09bd8ef63f67b0941f30c8f39e9a

Input Example:

{
   "jsonrpc":"2.0",
   "method":"validateAddress",
   "params":{
       "address":"Kak1Nwr16RtJ5M4wLVM7bnAXSMgimsgxiQtoSTXSBUrsQHQ6CbLKeXwimHyn2iqorN2DqL2b4HcaiJLvPmRbUMVXJTLqbjT"
   }
}

Return value example:

{
   "jsonrpc": "2.0",
   "result": {
       "address": "Kak1Nwr16RtJ5M4wLVM7bnAXSMgimsgxiQtoSTXSBUrsQHQ6CbLKeXwimHyn2iqorN2DqL2b4HcaiJLvPmRbUMVXJTLqbjT",
       "isvalid": true,
       "spendPublicKey": "17d068a5d62767661597779af63b7938f1e723052a2d0b8ed8fc6680cde3f88b",
       "viewPublicKey": "32c547698847b6f9b04bc9035a8d97074d2c09bd8ef63f67b0941f30c8f39e9a"
   }
}

Create delayed transaction

createDelayedTransaction() method creates a delayed transaction. Such transactions are not sent into the network automatically and should be pushed using sendDelayedTransaction method.

Input:

Argument	Mandatory	Description	Format	Example
addresses	No	Array of strings, where each string is an address	array	See below
transfers	Yes	Array that contains: `address` – string; `amount` – int64	array	"amount": 10000000000, "address": "KicW5PKpT2FQb8YKzKfQu27reK6FDZdnAEZ3dUbAoMwc1JeL1BgabGJ14VfzRiX951V4gXwTH1vf5TjVwuwn2f1wQkdpSg5"
fee	Yes	Transaction fee. This parameter should be specified in minimal available KRB units.	uint64	10000000000
unlockTime	No	Height of the block until which transaction is going to be locked for spending.	uint64	0
anonymity	Yes	Privacy level (a discrete number from 1 to infinity). Level 6 and higher is recommended.	uint64	6
extra	No	String of variable length. Can contain A-Z, 0-9 characters.	string	something123
paymentId	No	payment_id	string	f9e13241e0b31844aa7ec17768e2dcb41c268bed84b3d0f7e4be9e8bde625212
changeAddress	No	Valid and existing in this container address.	string	Kak1Nwr16RtJ5M4wLVM7bnAXSMgimsgxiQtoSTXSBUrsQHQ6CbLKeXwimHyn2iqorN2DqL2b4HcaiJLvPmRbUMVXJTLqbjT

Note: if container contains only 1 address, changeAddress field can be left empty and the change is going to be sent to this address

Note: if addresses field contains only 1 address, changeAddress can be left empty and the change is going to be sent to this address

Note: in the rest of the cases, changeAddress field is mandatory and must contain an address.

Note: outputs that were used for this transactions will be locked until the transaction is sent or cancelled

Output:

Argument	Description	Format	Example
transactionHash	Hash of the sent transaction.	string	93faedc8b8a80a084a02dfeffd163934746c2163f23a1b6022b32423ec9ae08f

Input Example:

{
 "params":{  
    "anonymity":0,
    "fee":1000000,
    "unlockTime":0,
    "paymentId":"somePaymentId",
    "addresses":[  
       "KcQTbNJrh5kPVu2oJbRGA2AZAjiRdkZDMVuvzirpJD1jirBcZm4LBF5GhBb2Z4ycW8QJ35DcVpx4phx8eYbHKwHbFkKp6HF",
       "KayLEZuEn35Fk7jxFrSJjACYdiNJUJUZJHqqAjyrxceCQhAemA8BFZjBKpER6zXd7zCUNm1Dw9SKc44cLtFKx8i86UQVN9s",
       "Kj93UPwkr996gz7YnEbvt2MbdJH9B1LVDerpU3ccei8p7YYU1U6knMFPFLPLu1HqcVRHZWh7w5EgQYjqTZnpDTcZQM8WXh9"
    ],
    "transfers":[  
       {  
          "amount":123456,
          "address":"KhSU5yrrqJXYE77xXXDiybNpvngkGAZ5S4pqfwTDLbPRceaUAuVQasmG5DZfjkhH3n62MMBfTyHGY7W772bTjMZsS6tMtsT"
       },
       {  
          "amount":234567,
          "address":"KengGF55Xgo48K6Z5qwfgF3zFMve4gaFy6GyifShHndjLeDn4Mb2PHrR2CYCUKfneRSvFujPHoeZwbMdTziCXw2jDwhThy3"
       },
       {  
          "amount":345678,
          "address":"Ka6VdMqB6XuLwvMyJsfBakaD3FzxJ1EFDcM3fHx96SvKbPZUcMVTtTsQuB3LxVBfKaYh1jTNNfyvJEKrGoysWyUZKTPv6hL"
       }
    ],
    "changeAddress":"KcQTbNJrh5kPVu2oJbRGA2AZAjiRdkZDMVuvzirpJD1jirBcZm4LBF5GhBb2Z4ycW8QJ35DcVpx4phx8eYbHKwHbFkKp6HF"
 },
 "jsonrpc":"2.0",
 "id":"test",
 "method":"createDelayedTransaction"
}

Return value example:

{
 "jsonrpc":"2.0",
 "id":"test",
 "result":{  
    "transactionHash":"93faedc8b8a80a084a02dfeffd163934746c2163f23a1b6022b32423ec9ae08f"
 }
}

Send delayed transaction

sendDelayedTransaction() method sends a specified delayed transaction.

Input:

Argument	Mandatory	Description	Format	Example
transactionHash	Yes	Valid, existing delayed transaction	string	c671d1005eaaf7c51b1e23eeec1c899e43fa7a332cdc2bcf1e45b908e23d8837

Output:

In case of success returns an empty JSON object.

Input example:

{
 "params":{  
    "transactionHash":"c671d1005eaaf7c51b1e23eeec1c899e43fa7a332cdc2bcf1e45b908e23d8837"
 },
 "jsonrpc":"2.0",
 "id":"test",
 "method":"sendDelayedTransaction"
}

Output example:

{
   "id":"1",
   "jsonrpc":"2.0",
   "result": {}
}

Get delayed transaction hashes

getDelayedTransactionHashes() method returns hashes of delayed transactions.

No input.

Output:

Argument	Description	Format	Example
transactionHashes	Array of strings, where each string is a transaction hash	array	See below

Input example:

{
   "jsonrpc": "2.0", 
   "id": "1", 
   "method": "getDelayedTransactionHashes"
}

Output example:

{
 "jsonrpc":"2.0",
 "id":"test",
 "result":{  
          "transactionHashes":[  
              "957dcbf54f327846ea0c7a16b2ae8c24ba3fa8305cc3bbc6424e85e7d358b44b",
              "25bb751814dd39bf46c972bd760e7516e34200f5e5dd02fda696671e11201f78"
          ],
       }
    ]
 }
}

Delete delayed transaction

deleteDelayedTransaction() method deletes a specified delayed transaction.

Input:

Argument	Mandatory	Description	Format	Example
transactionHash	Yes	Valid, existing delayed transaction	string	c671d1005eaaf7c51b1e23eeec1c899e43fa7a332cdc2bcf1e45b908e23d8837

Output:

In case of success returns an empty JSON object.

Input example:

{
  "params":{  
     "transactionHash":"c671d1005eaaf7c51b1e23eeec1c899e43fa7a332cdc2bcf1e45b908e23d8837"
  },
  "jsonrpc":"2.0",
  "id":"test",
  "method":"deleteDelayedTransaction"
}

Output example:

{
   "id":"1",
   "jsonrpc":"2.0",
   "result": {}
}

Sign message

signMessage() allows to sign message with wallet keys.

Input:

Argument	Mandatory	Description	Format	Example
address	No	Public address for keys used to sign message	string
message	Yes	The message to sign	string	test

Note: if address is not provided, default main (first) address is used to sign the message.

Output:

Argument	Description	Format	Example
adddress	Address, used to sing the message (useful in case it was omitted in request)	string
signature	The signature generated with wallet keys	string	SigV16DzpgqS3dQJZMLcTfjhFivsYjC7UCkUdS1DLFUujUkHdyoRnADcpPjv66JXgeQU5ujTc5UnEPTfwDqJTUSXUUg5jM2MmRi

Input example:

{
  "jsonrpc": "2.0",
  "id": "test",
  "method": "signMessage",
  "params":{
    "message":"test"
  }
}

Output example:

{
   "id":"test",
   "jsonrpc":"2.0",
   "result":{
      "address":"Kcwr4Awjn7QefxbAEvHSAcTrVbhzYukfmbDvwWkrDhjFXe1FVUj5ggxCrEv4w2zv6iVZgoF4v7b3cNAbaU3LKQGS9EU9KAd",
      "signature":"SigV16DzpgqS3dQJZMLcTfjhFivsYjC7UCkUdS1DLFUujUkHdyoRnADcpPjv66JXgeQU5ujTc5UnEPTfwDqJTUSXUUg5jM2MmRi"
   }
}

Verify message

verifyMessage() method is used to verify signed message.

Input:

Argument	Mandatory	Description	Format	Example
address	Yes	Public address for keys used to sign message	string
message	Yes	The message to sign	string
signature	Yes	The signature	string	SigV16DzpgqS3dQJZMLcTfjhFivsYjC7UCkUdS1DLFUujUkHdyoRnADcpPjv66JXgeQU5ujTc5UnEPTfwDqJTUSXUUg5jM2MmRi

Output:

Argument	Description	Format	Example
isValid	Denotes whether signature of message is valid or not	boolean	See below

Input example:

{
  "jsonrpc": "2.0",
  "id": "test",
  "method": "verifyMessage",
  "params":{
    "address":"Kcwr4Awjn7QefxbAEvHSAcTrVbhzYukfmbDvwWkrDhjFXe1FVUj5ggxCrEv4w2zv6iVZgoF4v7b3cNAbaU3LKQGS9EU9KAd",
    "message":"test",
    "signature":"SigV16DzpgqS3dQJZMLcTfjhFivsYjC7UCkUdS1DLFUujUkHdyoRnADcpPjv66JXgeQU5ujTc5UnEPTfwDqJTUSXUUg5jM2MmRi"
  }
}

Output example:

{
   "id":"test",
   "jsonrpc":"2.0",
   "result":{
      "isValid":true
   }
}

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

walletd-json-rpc.md

walletd-json-rpc.md

Reset

Get status

Save

Export

Get view key

Get spend keys

Get mnemonic seed

Get addresses

Create address

Create address list

Delete address

Get balance

Get block hashes

Get transaction hashes

Get transactions

Get unconfirmed transaction hashes

Get transaction

Send transaction

Estimate fusion

Send fusion transaction

Validate address

Create delayed transaction

Send delayed transaction

Get delayed transaction hashes

Delete delayed transaction

Sign message

Verify message

Files

walletd-json-rpc.md

Latest commit

History

walletd-json-rpc.md

File metadata and controls

Reset

Get status

Save

Export

Get view key

Get spend keys

Get mnemonic seed

Get addresses

Create address

Create address list

Delete address

Get balance

Get block hashes

Get transaction hashes

Get transactions

Get unconfirmed transaction hashes

Get transaction

Send transaction

Estimate fusion

Send fusion transaction

Validate address

Create delayed transaction

Send delayed transaction

Get delayed transaction hashes

Delete delayed transaction

Sign message

Verify message