upgrade_guide

Upgrade guide

The purpose of this guide is to detail changes made by successive versions of the Java driver.

3.4.0

QueryBuilder methods in, lt, lte, eq, gt, and gte now accept Iterable as input rather than just List. This should have no impact unless you were accessing these methods using reflection in which case you need to account for these new parameter types.

3.2.0

The SSLOptions interface is now deprecated in favor of RemoteEndpointAwareSSLOptions. Similarly, the two existing implementations of that interface, JdkSSLOptions and NettySSLOptions, are now deprecated in favor of RemoteEndpointAwareJdkSSLOptions and RemoteEndpointAwareNettySSLOptions respectively (see JAVA-1364).

In 3.1.0, the driver would log a warning the first time it would skip a retry for a non-idempotent request; this warning has now been removed as users should now have adjusted their applications accordingly.

The caseSensitive field on @Column and @Field annotation now only applies to the name field on the annotation and not the name of the variable / method itself. If you were previously depending on the name of the field, you should add a name field to the annotation, i.e.: @Column(name="userName", caseSensitive=true).

3.1.0

This version introduces an important change in the default retry behavior: statements that are not idempotent are not always retried automatically anymore.

Prior to 2.1.10, idempotence was not considered for retries. This exposed applications to the risk of applying a non-idempotent statement twice (counter increment, list append...), or to more subtle bugs with lightweight transactions (see JAVA-819).

In 2.1.10 / 3.0.x, we introduced IdempotenceAwareRetryPolicy, which considers the Statement#isIdempotent() in the retry decision process. However, for consistency with previous versions, this policy was not enabled by default (in particular because statements are non-idempotent by default, and we didn't want applications to suddenly stop retrying queries that were retried before).

In 3.1.0, the default is now to not retry after a write timeout or request error if the statement is not idempotent. This is handled internally, the retry policy methods are not even invoked in those cases (and therefore IdempotenceAwareRetryPolicy has been deprecated). See the manual section about retries for more information.

In practice, here's what upgrading to 3.1.0 means for you:

• if you were already handling idempotence in your application, there won't be any change, but you can stop wrapping your retry policy with IdempotenceAwareRetryPolicy;
• otherwise, you might want to review how your code positions the setIdempotent flag on statements. In most cases the driver can't compute in automatically (because it doesn't parse query strings), so it takes a conservative approach and sets it to false by default. If you know the query is idempotent, you should set it to true manually. See the query idempotence section of the manual.

The driver logs a warning the first time it ignores a non-idempotent request; this warning will be removed in version 3.2.0.

3.0.4

The connection pool is now fully non-blocking (JAVA-893), which greatly improves asynchronous programming:

• Session.executeAsync won't ever block the user thread anymore;
• you can now safely run async queries on a session connected to a keyspace.

This new implementation brings a couple of changes:

• pool saturation is no longer handled by a timeout, but instead by a bounded queue. As a consequence, PoolingOptions.setPoolTimeoutMillis has been deprecated, and replaced by setMaxQueueSize;
• a saturated pool will now throw BusyPoolException instead of TimeoutException (note that this exception is not rethrown directly to the client, but wrapped in NoHostAvailableException.getErrors()).

3.0.0

This version brings parity with Cassandra 2.2 and 3.0.

It is not binary compatible with the driver's 2.1 branch. The main changes were introduced by the custom codecs feature (see below). We've also seized the opportunity to remove code that was deprecated in 2.1.

1. The default consistency level in QueryOptions is now LOCAL_ONE.

2. Custom codecs (JAVA-721) introduce several breaking changes and also modify a few runtime behaviors.

   Here is a detailed list of breaking API changes:

   • TypeCodec was package-private before and is now public.

   • DataType has no more references to TypeCodec, so methods that dealt with serialization and deserialization of data types have been removed:

     • ByteBuffer serialize(Object value, ProtocolVersion protocolVersion)
     • ByteBuffer serializeValue(Object value, ProtocolVersion protocolVersion)
     • Object deserialize(ByteBuffer bytes, ProtocolVersion protocolVersion)
     • Object deserialize(ByteBuffer bytes, int protocolVersion)
     • Object parse(String value)
     • String format(Object value)
     • Class<?> asJavaClass()

     These methods must now be invoked on TypeCodec directly. To resolve the TypeCodec instance for a particular data type, use CodecRegistry#codecFor.

   • GettableByIndexData (affects Row, BoundStatement, TupleValue and UDTValue). The following public methods were added:

     • <T> T get(int i, Class<T> targetClass)
     • <T> T get(int i, TypeToken<T> targetType)
     • <T> T get(int i, TypeCodec<T> codec)

   • GettableByNameData (affects Row, BoundStatement and UDTValue). The following public methods were added:

     • <T> T get(String name, Class<T> targetClass)
     • <T> T get(String name, TypeToken<T> targetType)
     • <T> T get(String name, TypeCodec<T> codec)

   • SettableByIndexData (affects Row, BoundStatement, TupleValue and UDTValue). The following public methods were added:

     • <V> T set(int i, V v, Class<V> targetClass)
     • <V> T set(int i, V v, TypeToken<V> targetType)
     • <V> T set(int i, V v, TypeCodec<V> codec)

   • SettableByNameData (affects Row, BoundStatement and UDTValue). The following public methods were added:

     • <V> T set(String name, V v, Class<V> targetClass)
     • <V> T set(String name, V v, TypeToken<V> targetType)
     • <V> T set(String name, V v, TypeCodec<V> codec)

   • Statement. The following public methods were modified:

     • getRoutingKey(ProtocolVersion, CodecRegistry): both parameters added.

   • RegularStatement. The following public methods were modified:

     • getValues(ProtocolVersion, CodecRegistry): second parameter added.
     • getQueryString(CodecRegistry) and hasValues(CodecRegistry): parameter added. No-arg versions are still present and use the default codec registry; refer to the Javadocs for guidance on which version to use.

   • PreparedStatement. The following public method was added:

     • CodecRegistry getCodecRegistry().

   • TupleType. The following public method was deleted:

     • TupleType of(DataType... types); users should now use Metadata.newTupleType(DataType...).

   The driver runtime behavior changes in the following situations:

   * By default, the driver now returns _mutable_, _non thread-safe_ instances for CQL collection types; This affects methods `getList`, `getSet`, `getMap`, `getObject` and `get` for all instances of `GettableByIndexData` and `GettableByNameData` (`Row`, `BoundStatement`, `TupleValue` and `UDTValue`) * `RuntimeException`s thrown during serialization or deserialization might not be the same ones as before, due to the newly-introduced `CodecNotFoundException` and to the dynamic nature of codec search introduced by JAVA-721. * `TypeCodec.format(Object)` now returns the CQL keyword `"NULL"` instead of a `null` reference for `null` inputs.

3. The driver now depends on Guava 16.0.1 (instead of 14.0.1). This update has been mainly motivated by Guava's Issue #1635, which affects TypeToken, and hence all TypeCodec implementations handling parameterized types.

4. UDTMapper (the type previously used to convert @UDT-annotated classes to their CQL counterpart) was removed, as well as the corresponding method MappingManager#udtMapper.

   The mapper now uses custom codecs to convert UDTs. See more explanations here.

5. All methods that took the protocol version as an int or assumed a default version have been removed (they were already deprecated in 2.1):

   • AbstractGettableData(int)
   • Cluster.Builder#withProtocolVersion(int)
   • in ProtocolOptions:
     • NEWEST_SUPPORTED_PROTOCOL_VERSION (replaced by ProtocolVersion#NEWEST_SUPPORTED)
     • int getProtocolVersion()

   There are now variants of these methods using the ProtocolVersion enum. In addition, ProtocolOptions#getProtocolVersionEnum has been renamed to ProtocolOptions#getProtocolVersion.

6. All methods related to the "suspected" host state have been removed (they had been deprecated in 2.1.6 when the suspicion mechanism was removed):

   • Host.StateListener#onSuspected() (was inherited by LoadBalancingPolicy)
   • Host#getInitialReconnectionAttemptFuture()

7. PoolingOptions#setMinSimultaneousRequestsPerConnectionThreshold(HostDistance, int) has been removed. The new connection pool resizing algorithm introduced by JAVA-419 does not need this threshold anymore.

8. AddressTranslater has been renamed to AddressTranslator. All related methods and classes have also been renamed.

   In addition, the close() method has been pulled up into AddressTranslator, and CloseableAddressTranslator has been removed. Existing third-party AddressTranslator implementations only need to add an empty close() method.

9. The close() method has been pulled up into LoadBalancingPolicy, and CloseableLoadBalancingPolicy has been removed. Existing third-party LoadBalancingPolicy implementations only need to add an empty close() method.

10. All pluggable components now have callbacks to detect when they get associated with a Cluster instance:

    • ReconnectionPolicy, RetryPolicy, AddressTranslator, and TimestampGenerator:
      • init(Cluster)
      • close()
    • Host.StateListener and LatencyTracker:
      • onRegister(Cluster)
      • onUnregister(Cluster)

    This gives these components the opportunity to perform initialization / cleanup tasks. Existing third-party implementations only need to add empty methods.

11. LoadBalancingPolicy does not extend Host.StateListener anymore: callback methods (onUp, onDown, etc.) have been duplicated. This is unlikely to affect clients.

12. Client-side timestamp generation is now the default (provided that native protocol v3 or higher is in use). The generator used is AtomicMonotonicTimestampGenerator.

13. If a DNS name resolves to multiple A-records, Cluster.Builder#addContactPoint(String) will now use all of these addresses as contact points. This gives you the possibility of maintaining contact points in DNS configuration, and having a single, static contact point in your Java code.

14. The following methods were added for Custom payloads:

    • in PreparedStatement: getIncomingPayload(), getOutgoingPayload() and setOutgoingPayload(Map<String,ByteBuffer>)
    • AbstractSession#prepareAsync(String, Map<String,ByteBuffer>)

    Also, note that AbstractSession#prepareAsync(Statement) does not call AbstractSession#prepareAsync(String) anymore, they now both delegate to a protected method.

    This breaks binary compatibility for these two classes; if you have custom implementations, you will have to adapt them accordingly.

15. Getters and setters have been added to "data-container" classes for new CQL types:

    • getByte/setByte for the TINYINT type
    • getShort/setShort for the SMALLINT type
    • getTime/setTime for the TIME type
    • getDate/setDate for the DATE type

    The methods for the TIMESTAMP CQL type have been renamed to getTimestamp and setTimestamp.

    This affects Row, BoundStatement, TupleValue and UDTValue.

16. New exception types have been added to handle additional server-side errors introduced in Cassandra 2.2:

    • ReadFailureException
    • WriteFailureException
    • FunctionExecutionException

    This is not a breaking change since all driver exceptions are unchecked; but clients might decide to handle these errors in a specific way.

    In addition, QueryTimeoutException has been renamed to QueryExecutionException (this is an intermediary class in our exception hierarchy, it now has new child classes that are not related to timeouts).

17. ResultSet#fetchMoreResults() now returns a ListenableFuture<ResultSet>. This makes the API more friendly if you chain transformations on an async query to process all pages (see AsyncResultSetTest in the sources for an example).

18. Frozen annotations in the mapper are no longer checked at runtime (see JAVA-843 for more explanations). So they become purely informational at this stage. However it is a good idea to keep using these annotations and make sure they match the schema, in anticipation for the schema generation features that will be added in a future version.

19. AsyncInitSession has been removed, initAsync() is now part of the Session interface (the only purpose of the extra interface was to preserve binary compatibility on the 2.1 branch).

20. TableMetadata.Options has been made a top-level class and renamed to TableOptionsMetadata. It is now also used by MaterializedViewMetadata.

21. The mapper annotation @Enumerated has been removed, users should now use the newly-introduced driver-extras module to get automatic enum-to-CQL mappings. Two new codecs provide the same functionality: EnumOrdinalCodec and EnumNameCodec:

    enum Foo {...}
    enum Bar {...}
    
    // register the appropriate codecs
    CodecRegistry.DEFAULT_INSTANCE
        .register(new EnumOrdinalCodec<Foo>(Foo.class))
        .register(new EnumNameCodec<Bar>(Bar.class))
    
    // the following mappings are handled out-of-the-box
    @Table
    public class MyPojo {
        private Foo foo;
        private List<Bar> bars;
        ...
    }

22. The interface IdempotenceAwarePreparedStatement has been removed and now the PreparedStatement interface exposes 2 new methods, setIdempotent(Boolean) and isIdempotent().

23. RetryPolicy and ExtendedRetryPolicy (introduced in 2.1.10) were merged together; as a consequence, RetryPolicy now has one more method: onRequestError; see JAVA-819 for more information. Furthermore, FallthroughRetryPolicy now returns RetryDecision.rethrow() when onRequestError is called.

24. DseAuthProvider has been deprecated and is now replaced by DseGSSAPIAuthProvider for Kerberos authentication. DsePlainTextAuthProvider has been introduced to handle plain text authentication with the DseAuthenticator.

25. The constructor of DCAwareRoundRobinPolicy is not accessible anymore. You should use DCAwareRoundRobinPolicy#builder() to create new instances.

26. ColumnMetadata.getTable() has been renamed to ColumnMetadata.getParent(). Also, its return type is now AbstractTableMetadata which can be either a TableMetadata object or a MaterializedViewMetadata object. This change is motivated by the fact that a column can now belong to a table or a materialized view.

27. ColumnMetadata.getIndex() has been removed. This is due to the fact that secondary indexes have been completely redesigned in Cassandra 3.0, and the former one-to-one relationship between a column and its index has been replaced with a one-to-many relationship between a table and its indexes. This is reflected in the driver's API by the new methods TableMetadata.getIndexes() and TableMetadata.getIndex(String name). See CASSANDRA-9459 and and JAVA-1008 for more details. Unfortunately, there is no easy way to recover the functionality provided by the deleted method, even for Cassandra versions <= 3.0.

28. IndexMetadata is now a top-level class and its structure has been deeply modified. Again, this is due to the fact that secondary indexes have been completely redesigned in Cassandra 3.0.

29. SSLOptions has been refactored to allow the option to choose between JDK and Netty-based SSL implementations. See JAVA-841 and the SSL documentation for more details.

2.1.8

2.1.8 is binary-compatible with 2.1.7 but introduces a small change in the driver's behavior:

1. The list of contact points provided at startup is now shuffled before trying to open the control connection, so that multiple clients with the same contact points don't all pick the same control host. As a result, you can't assume that the driver will try contact points in a deterministic order. In particular, if you use the DCAwareRoundRobinPolicy without specifying a primary datacenter name, make sure that you only provide local hosts as contact points.

2.1.7

This version brings a few changes in the driver's behavior; none of them break binary compatibility.

1. The DefaultRetryPolicy's behaviour has changed in the case of an Unavailable exception received from a request. The new behaviour will cause the driver to process a Retry on a different node at most once, otherwise an exception will be thrown. This change makes sense in the case where the node tried initially for the request happens to be isolated from the rest of the cluster (e.g. because of a network partition) but can still answer to the client normally. In this case, trying another node has a chance of success. The previous behaviour was to always throw an exception.

2. The following properties in PoolingOptions were renamed:

   • MaxSimultaneousRequestsPerConnectionThreshold to NewConnectionThreshold
   • MaxSimultaneousRequestsPerHostThreshold to MaxRequestsPerConnection

   The old getters/setters were deprecated, but they delegate to the new ones.

   Also, note that the connection pool for protocol v3 can now be configured to use multiple connections. See this page for more information.

3. MappingManager(Session) will now force the initialization of the Session if needed. This is a change from 2.1.6, where if you gave it an uninitialized session (created with Cluster#newSession() instead of Cluster#connect()), it would only get initialized on the first request.

   If this is a problem for you, MappingManager(Session, ProtocolVersion) preserves the previous behavior (see the API docs for more details).

4. A BuiltStatement is now considered non-idempotent whenever a fcall() or raw() is used to build a value to be inserted in the database. If you know that the CQL functions or expressions are safe, use setIdempotent(true) on the statement.

2.1.6

See 2.0.10.

2.1.2

2.1.2 brings important internal changes with native protocol v3 support, but the impact on the public API has been kept as low as possible.

User API Changes

1. The native protocol version is now modelled as an enum: ProtocolVersion. Most public methods that take it as an argument have a backward-compatible version that takes an int (the exception being RegularStatement, described below). For new code, prefer the enum version.

Internal API Changes

1. RegularStatement.getValues now takes the protocol version as a ProtocolVersion instead of an int. This is transparent for callers since there is a backward-compatible alternative, but if you happened to extend the class you'll need to update your implementation.

2. BatchStatement.setSerialConsistencyLevel now returns BatchStatement instead of Statement. Again, this only matters if you extended this class (if so, it might be a good idea to also have a covariant return in your child class).

3. The constructor of UnsupportedFeatureException now takes a ProtocolVersion as a parameter. This should impact few users, as there's hardly any reason to build instances of that class from client code.

New features

These features are only active when the native protocol v3 is in use.

1. The driver now uses a single connection per host (as opposed to a pool in 2.1.1). Most options in PoolingOptions are ignored, except for a new one called maxSimultaneousRequestsPerHostThreshold. See the class's Javadocs for detailed explanations.

2. You can now provide a default timestamp with each query (but it will be ignored if the CQL query string already contains a USING TIMESTAMP clause). This can be done on a per-statement basis with Statement.setDefaultTimestamp, or automatically with a TimestampGenerator specified with Cluster.Builder.withTimestampGenerator (two implementations are provided: ThreadLocalMonotonicTimestampGenerator and AtomicMonotonicTimestampGenerator). If you specify both, the statement's timestamp takes precedence over the generator. By default, the driver has the same behavior as 2.1.1 (no generator, timestamps are assigned by Cassandra unless USING TIMESTAMP was specified).

3. BatchStatement.setSerialConsistencyLevel no longer throws an exception, it will honor the serial consistency level for the batch.

2.1.1

Internal API Changes

1. The ResultSet interface has a new wasApplied() method. This will only affect clients that provide their own implementation of this interface.

2.1.0

User API Changes

1. The getCaching method of TableMetadata#Options now returns a Map to account for changes to Cassandra 2.1. Also, the getIndexInterval method now returns an Integer instead of an int which will be null when connected to Cassandra 2.1 nodes.

2. BoundStatement variables that have not been set explicitly will no longer default to null. Instead, all variables must be bound explicitly, otherwise the execution of the statement will fail (this also applies to statements inside of a BatchStatement). For variables that map to a primitive Java type, a new setToNull method has been added. We made this change because the driver might soon distinguish between unset and null variables, so we don't want clients relying on the "leave unset to set to null" behavior.

Internal API Changes

The changes listed in this section should normally not impact end users of the driver, but rather third-party frameworks and tools.

1. The serialize and deserialize methods in DataType now take an additional parameter: the protocol version. As explained in the javadoc, if unsure, the proper value to use for this parameter is the protocol version in use by the driver, i.e. the value returned by cluster.getConfiguration().getProtocolOptions().getProtocolVersion().

2. The parse method in DataType now returns a Java object, not a ByteBuffer. The previous behavior can be obtained by calling the serialize method on the returned object.

3. The getValues method of RegularStatement now takes the protocol version as a parameter. As above, the proper value if unsure is almost surely the protocol version in use (cluster.getConfiguration().getProtocolOptions().getProtocolVersion()).

2.0.11

2.0.11 preserves binary compatibility with previous versions. There are a few changes in the driver's behavior:

1. The DefaultRetryPolicy's behaviour has changed in the case of an Unavailable exception received from a request. The new behaviour will cause the driver to process a Retry on a different node at most once, otherwise an exception will be thrown. This change makes sense in the case where the node tried initially for the request happens to be isolated from the rest of the cluster (e.g. because of a network partition) but can still answer to the client normally. In this case, trying another node has a chance of success. The previous behaviour was to always throw an exception.

2. A BuiltStatement is now considered non-idempotent whenever a fcall() or raw() is used to build a value to be inserted in the database. If you know that the CQL functions or expressions are safe, use setIdempotent(true) on the statement.

3. The list of contact points provided at startup is now shuffled before trying to open the control connection, so that multiple clients with the same contact points don't all pick the same control host. As a result, you can't assume that the driver will try contact points in a deterministic order. In particular, if you use the DCAwareRoundRobinPolicy without specifying a primary datacenter name, make sure that you only provide local hosts as contact points.

2.0.x to 2.0.10

We try to avoid breaking changes within a branch (2.0.x to 2.0.y), but 2.0.10 saw a lot of new features and internal improvements. There is one breaking change:

1. LatencyTracker#update now has a different signature and takes two new parameters: the statement that has been executed (never null), and the exception thrown while executing the query (or null, if the query executed successfully). Existing implementations of this interface, once upgraded to the new method signature, should continue to work as before.

The following might also be of interest:

2. SocketOptions#getTcpNoDelay() is now TRUE by default (it was previously undefined). This reflects the new behavior of Netty (which was upgraded from version 3.9.0 to 4.0.27): TCP_NODELAY is now turned on by default, instead of depending on the OS default like in previous versions.

3. Netty is not shaded anymore in the default Maven artifact. However we publish a shaded artifact under a different classifier.

4. The internal initialization sequence of the Cluster object has been slightly changed: some fields that were previously initialized in the constructor are now set when the init() method is called. In particular, Cluster#getMetrics() will return null until the cluster is initialized.

1.0 to 2.0

We used the opportunity of a major version bump to incorporate your feedback and improve the API, to fix a number of inconsistencies and remove cruft. Unfortunately this means there are some breaking changes, but the new API should be both simpler and more complete.

The following describes the changes for 2.0 that are breaking changes of the 1.0 API. For ease of use, we distinguish two categories of API changes: the "main" ones and the "other" ones.

The "main" API changes are the ones that are either likely to affect most upgraded apps or are incompatible changes that, even if minor, will not be detected at compile time. Upgraders are highly encouraged to check this list of "main" changes while upgrading their application to 2.0 (even though most applications are likely to be affected by only a handful of changes).

The "other" list is, well, other changes: those that are likely to affect a minor number of applications and will be detected by compile time errors anyway. It is ok to skip those initially and only come back to them if you have trouble compiling your application after an upgrade.

Main API changes

1. The Query class has been renamed into Statement (it was confusing to some that the BoundStatement was not a Statement). To allow this, the old Statement class has been renamed to RegularStatement.

2. The Cluster and Session shutdown API has changed. There is now a closeAsync that is asynchronous but returns a Future on the completion of the shutdown process. There is also a close shortcut that does the same but blocks. Also, close now waits for ongoing queries to complete by default (but you can force the closing of all connections if you want to).

3. NoHostAvailableException#getErrors now returns the full exception objects for each node instead of just a message. In other words, it returns a Map<InetAddress, Throwable> instead of a Map<InetAddress, String>.

4. Statement#getConsistencyLevel (previously Query#getConsistencyLevel, see first point) will now return null by default (instead of CL.ONE), with the meaning of "use the default consistency level". The default consistency level can now be configured through the new QueryOptions object in the cluster Configuration.

5. The Metrics class now uses the Codahale metrics library version 3 (version 2 was used previously). This new major version of the library has many API changes compared to its version 2 (see the release notes for details), which can thus impact consumers of the Metrics class. Furthermore, the default JmxReporter now includes a name specific to the cluster instance (to avoid conflicts when multiple Cluster instances are created in the same JVM). As a result, tools that were polling JMX info will have to be updated accordingly.

6. The QueryBuilder#in method now has the following special case: using QueryBuilder.in(QueryBuilder.bindMarker()) will generate the string IN ?, not IN (?) as was the case in 1.0. The reasoning being that the former syntax, made valid by CASSANDRA-4210 is a lot more useful than IN (?), as the latter can more simply use an equality. Note that if you really want to output IN (?) with the query builder, you can use QueryBuilder.in(QueryBuilder.raw("?")).

7. When binding values by name in BoundStatement (i.e. using the setX(String, X) methods), if more than one variable have the same name, then all values corresponding to that variable name are set instead of just the first occurrence.

8. The QueryBuilder#raw method does not automatically add quotes anymore, but rather output its result without any change (as the raw name implies). This means for instance that eq("x", raw(foo)) will output x = foo, not x = 'foo' (you don't need the raw method to output the latter string).

9. The QueryBuilder will now sometimes use the new ability to send value as bytes instead of serializing everything to string. In general the QueryBuilder will do the right thing, but if you were calling the getQueryString() method on a Statement created with a QueryBuilder (for other reasons than to prepare a query) then the returned string may contain bind markers in place of some of the values provided (and in that case, getValues() will contain the values corresponding to those markers). If need be, it is possible to force the old behavior by using the new setForceNoValues() method.

Other API Changes

1. Creating a Cluster instance (through Cluster#buildFrom or the Cluster.Builder#build method) does not create any connection right away anymore (and thus cannot throw a NoHostAvailableException or an AuthenticationException). Instead, the initial contact points are checked the first time a call to Cluster#connect is done. If for some reason you want to emulate the previous behavior, you can use the new method Cluster#init: Cluster.builder().build() in 1.0 is equivalent to Cluster.builder().build().init() in 2.0.

2. Methods from Metadata, KeyspaceMetadata and TableMetadata now use by default case insensitive identifiers (for keyspace, table and column names in parameter). You can double-quote an identifier if you want it to be a case sensitive one (as you would do in CQL) and there is a Metadata.quote helper method for that.

3. The TableMetadata#getClusteringKey method has been renamed TableMetadata#getClusteringColumns to match the "official" vocabulary.

4. The UnavailableException#getConsistency method has been renamed to UnavailableException#getConsistencyLevel for consistency with the method of QueryTimeoutException.

5. The RegularStatement class (ex-Statement class, see above) must now implement two additional methods: RegularStatement#getKeyspace and RegularStatement#getValues. If you had extended this class, you will have to implement those new methods, but both can return null if they are not useful in your case.

6. The Cluster.Initializer interface should now implement 2 new methods: Cluster.Initializer#getInitialListeners (which can return an empty collection) and Cluster.Initializer#getClusterName (which can return null).

7. The Metadata#getReplicas method now takes 2 arguments. On top of the partition key, you must now provide the keyspace too. The previous behavior was buggy: it's impossible to properly return the full list of replica for a partition key without knowing the keyspace since replication may depend on the keyspace).

8. The method LoadBalancingPolicy#newQueryPlan() method now takes the currently logged keyspace as 2nd argument. This information is necessary to do proper token aware balancing (see preceding point).

9. The ResultSetFuture#set and ResultSetFuture#setException methods have been removed (from the public API at least). They were never meant to be exposed publicly: a resultSetFuture is always set by the driver itself and should not be set manually.

10. The deprecated since 1.0.2 Host.HealthMonitor class has been removed. You will now need to use Host#isUp and Cluster#register if you were using that class.

Features available only with Cassandra 2.0

This section details the biggest additions to 2.0 API wise. It is not an exhaustive list of new features in 2.0.

1. The new BatchStatement class allows to group any type of insert Statements (BoundStatement or RegularStatement) for execution as a batch. For instance, you can do something like:

   List<String> values = ...;
   PreparedStatement ps = session.prepare("INSERT INTO myTable(value) VALUES (?)");
   BatchStatement bs = new BatchStatement();
   for (String value : values)
      bs.add(ps.bind(value));
   session.execute(bs);

2. SimpleStatement can now take a list of values in addition to the query. This allows to do the equivalent of a prepare+execute but with only one round-trip to the server and without keeping the prepared statement after the execution.

   This is typically useful if a given query should be executed only once (i.e. you don't want to prepare it) but you also don't want to serialize all values into strings. Shortcut Session#execute() and Session#executeAsync() methods are also provided so you that you can do:

   String imgName = ...;
   ByteBuffer imgBytes = ...;
   session.execute("INSERT INTO images(name, bytes) VALUES (?, ?)", imgName, imgBytes);

3. SELECT queries are now "paged" under the hood. In other words, if a query yields a very large result, only the beginning of the ResultSet will be fetched initially, the rest being fetched "on-demand". In practice, this means that:

   for (Row r : session.execute("SELECT * FROM mytable"))
      ... process r ...

   should not timeout or OOM the server anymore even if "mytable" contains a lot of data. In general paging should be transparent for the application (as in the example above), but the implementation provides a number of knobs to fine tune the behavior of that paging:

   • the size of each "page" can be set per-query (Statement#setFetchSize())
   • the ResultSet object provides 2 methods to check the state of paging (ResultSet#getAvailableWithoutFetching and ResultSet#isFullyFetched) as well as a mean to force the pre-fetching of the next page (ResultSet#fetchMoreResults).