From e518840625e1f31116519e1239e4688f0b63413d Mon Sep 17 00:00:00 2001 From: Zeanon Date: Tue, 10 Sep 2024 17:45:35 +0200 Subject: [PATCH] Add new Dragon Ace heater to MPC doc Added the new dragon ace "high power" heater to the MPC power-temp chart --- docs/MPC.md | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/docs/MPC.md b/docs/MPC.md index 61562b5c2..5e69c435a 100644 --- a/docs/MPC.md +++ b/docs/MPC.md @@ -90,15 +90,15 @@ These can be specified in the config but should not need to be changed from the The `heater power:` for PTC style heaters is recommended to be set at the normal print temperature for the printer. Some common PTC heaters are given below for reference. If your heater is not listed the manufacturer should be able to provide a temperature and power curve. -| Heater Temp (C) | Rapido 2 (W) | Rapido 1 (W) | Dragon Ace (W) | Revo 40 (W) |Revo 60 (W) | -|:---------------:|:------------:|:------------:|:--------------:|:-----------:|:----------:| -| 180 | 72 | 52 | 51 | 30 |45 | -| 200 | 70 | 51 | 48 | 29 |44 | -| 220 | 67 | 50 | 46 | 28 |43 | -| 240 | 65 | 49 | 44 | 28 |42 | -| 260 | 64 | 48 | 43 | 27 |40 | -| 280 | 62 | 47 | 41 | 27 |39 | -| 300 | 60 | 46 | 39 | 26 |38 | +| Heater Temp (C) | Rapido 2 (W) | Rapido 1 (W) | Dragon Ace old (W) | Dragon Ace new (W) | Revo 40 (W) |Revo 60 (W) | +|:---------------:|:------------:|:------------:|:------------------:|:------------------:|:-----------:|:----------:| +| 180 | 72 | 52 | 51 | 66 | 30 |45 | +| 200 | 70 | 51 | 48 | 63 | 29 |44 | +| 220 | 67 | 50 | 46 | 60 | 28 |43 | +| 240 | 65 | 49 | 44 | 58 | 28 |42 | +| 260 | 64 | 48 | 43 | 55 | 27 |40 | +| 280 | 62 | 47 | 41 | 53 | 27 |39 | +| 300 | 60 | 46 | 39 | 51 | 26 |38 | ## Filament Feed Forward Configuration