From 8eb614449a33fa36f67d31671350d67b9f05db93 Mon Sep 17 00:00:00 2001 From: Frank Tackitt Date: Tue, 17 Dec 2024 07:11:14 -0700 Subject: [PATCH] =?UTF-8?q?Add=20a=20line=20to=20the=20Config=20and=20GCod?= =?UTF-8?q?e=20reference=20explaining=20=E2=9A=A0=EF=B8=8F=20(#481)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- docs/Config_Reference.md | 2 ++ docs/G-Codes.md | 2 ++ 2 files changed, 4 insertions(+) diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index fbb4d8446..912986506 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -3,6 +3,8 @@ This document is a reference for options available in the Kalico config file. +Sections and options are marked with an ⚠️ to denote configurations that are changed from stock Klipper. + The descriptions in this document are formatted so that it is possible to cut-and-paste them into a printer config file. See the [installation document](Installation.md) for information on setting up diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 111916952..b18e0186e 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -3,6 +3,8 @@ This document describes the commands that Kalico supports. These are commands that one may enter into the OctoPrint terminal tab. +Sections and commands marked with an ⚠️ show commands that are new or behave differently from Klipper + ## G-Code commands Kalico supports the following standard G-Code commands: