Bug Report: The system image does not run on Orange Pi 5 Plus

[grhgrmgrhrm]

What happened?

Hi! I downloaded different versions of the operating system for OrangePi 5 Plus and tried to burn them both to an SD card and a USB flash drive and also directly burn them to eMMC. The system does not start on OrangePi 5 Plus.
I've tried different flash drives, different versions of the system - 22.04 , 24.04, 24.19 - and desktop and server versions.
The system does not start in any way. At the same time, a competitive system (called Arm...) it starts on my board the first time. Also, I check the checksums of the image before writing it to a flash drive. The operating system I'm trying to burn the image from is Windows. Recording utilities - balenaEtcher, Rufus, Universal Usb installer.
Please take a look - maybe your images for this board are not being assembled correctly?

Kernel version

6.1.0-1020-rockchip

SBC model

Orange Pi 5 Plus

What operating system are you seeing this problem on?

Ubuntu 22.04 LTS (Jammy Jellyfish), Ubuntu 24.04 LTS (Noble Nombat)

Relevant logs

No response

[dgdonovan]

See #1104

[kaosbeat]

also, I have no problem at all running the 24.04 on the OPi5-plus, what instructions did you follow to get it going? can you SSH into the system? maybe no HDMI but it still boots?

[grhgrmgrhrm]

also, I have no problem at all running the 24.04 on the OPi5-plus, what instructions did you follow to get it going? can you SSH into the system? maybe no HDMI but it still boots?

First of all, all attempts to start the board were through connection to a TV via HDMI port. Also I tried to follow this instruction - https://github.com/Joshua-Riek/ubuntu-rockchip?tab=readme-ov-file#installation
0) When recording an image using Belena, a verification error popped up after the recording itself. The image was downloaded as well as the url for downloading through the program. The image was additionally checked against checksums, but Belena never successfully verified the image recording. Tried to write with other utilities - ok, but:

1. SD card did not boot, black screen
2. from USB did not boot, black screen
3. I installed the system through the manufacturer's instructions, using the RKDevTool utility directly on the emmc memory - the same thing, black screen
4. I also tried to boot from the SD card to Armbian and then download the Ubuntu image from there to the nvme disk, which I then copied to emmc via the command line - the result of the download is a black screen.

The board seemed to boot itself, green LED was blinking and red LED was lit in parallel, but nothing was displayed on the screen. On the other hand, I performed exactly the same actions for Armbian - it starts up from the first time.

[ctshieh]

Same here