As part of a master's thesis, at the Institute for Integrated Circuits (IIC), Johannes Kepler University, Linz, Austria, an automated analog layout design flow was developed.
The input of the flow is a netlist in the SPICE format composed of devices using the SkyWater Technologies SKY130 process design kit. Optionally, a file in the json-format that contains information for the routing task, like minimum wire widths, can also be specified. From the netlist, the circuit is captured and converted into an internal data structure, that is capable for the tasks of the remaining flow. The subsequent stage annotates devices which are forming smaller circuits and match those in a precompiled database. Thus, these precompiled circuits allow the finding of differential pairs, differential loads, cross-coupled pairs, and in series connected resistors, so called R-strings. From the annotated circuit, the primitive cells are instantiated, by the use of the parametrized cell generator available in MAGIC. The positions of the cells in the layout are then found by using a reinforcement learning algorithm (or optionally by using a simulated annealing algorithm), such that they minimize a cost function based on the estimated total wire length and routing congestion. After the placement is fixed, a two stage routing-algorithm connects the devices. The first stage is a wire-planning algorithm which plans the routes on a rough tile-based grid and provides a guidance to the second stage, which is a detailed router. That one lays out the actual resources by using a gridless approach based on obstacle expansion. The output of the whole flow is a .mag-file which contains the placement, and a Tcl script for generating the routing in MAGIC.
- Use the IIC-OSIC-TOOLS all in one docker container.
- SKY130 PDK
- For easy installation checkout volare
- MAGIC
- Python >= 3.9 with the installed requirements
- Path to the sky130A pdk set under
$PDKPATH, this can look like as follows
export PDKPATH=/home/pdks/sky130A
git clone https://github.com/iic-jku/IIC-RALF
To design your circuit, add the circuits-netlist (only .spice formats are supported) to the Circuits folder.
- The top-circuit isn't a subcircuit.
- The netlist only contains the devices
- sky130_fd_pr__nfet_01v8
- sky130_fd_pr__pfet_01v8
- sky130_fd_pr__cap_mim_m3_1
- sky130_fd_pr__cap_mim_m3_2
- sky130_fd_pr__res_xhigh_po_0p35
- E.g. a valid netlist looks like
x1 Vin Vout1 Vdd Vss inv
x2 Vin2 Vout Vdd Vss inv
XR1 Vout1 Vin2 Vss sky130_fd_pr__res_xhigh_po_0p35 L=2 mult=1 m=1
XC1 Vin2 Vss sky130_fd_pr__cap_mim_m3_1 W=4 L=4 MF=1 m=1
.subckt inv A Y Vdd Vss
XM1 Y A Vss Vss sky130_fd_pr__nfet_01v8 L=1 W=1 nf=1 m=1
XM2 Y A Vdd Vdd sky130_fd_pr__pfet_01v8 L=1 W=3 nf=3 m=1
.ends
.end
There are two supported placement mechanisms:
- Reinforcement learning based (
main_RL_placement.py) - Simulated annealing based (
main_RP_placement.py)
To do a placement, adapt the global variables according to your circuit, and run the script in a shell. The most valuable ones are
CIRCUIT_FILE: Defines the input SPICE-netlist.CIRCUIT_NAME: Defines the name of the top-circuit and top-cell.NET_RULES_FILE: Defines the net-rules file in the json-format, to specify different net-widths. If not available set the variable toNone.N_PLACEMENTS: Defines the total number of performed trial placements.
For the reinforcement learning based placement run:
python3 main_RL_placement.py
For the simulated annealing based placement run:
python3 main_RPS_placement.py
The placed circuit will be stored under PlacementCircuits/<circuit_name>_placement.pkl.
To view the placement in Magic run the script main_place_circuit.py.
python3 main_place_circuit.py
Don't forget to adapt the variable CIRCUIT_NAME to your circuits name!
The generated Magic file of the placement will be located under Magic/Placement/<CIRCUIT_NAME>.mag.
The routing of an already placed circuit can be performed by running the script main_routing.py.
python3 main_routing.py
To use the negotiation based wire-planner before the detailed router set the variables
PLAN_WIRES=True, to activate the plannerN_PLANNING_ITERATIONS, for defining the number of planning iterationsGCELL_LENGTH, for defining the width and height of a grid cell (150is recommended)LAYERS, for defining the usable layers (['m1','m2','m3','m4']is recommended)
Don't forget to adapt the variable CIRCUIT_NAME to your circuits name!\
Per default, the script generates a .tcl-file located under Magic/Routing/<CIRCUIT_NAME>_routing.tcl.
To view the routing, run the main_place_route_circuit.py script. Alternatively the placement can be first viewed in Magic by
magic Magic/Placement/<CIRCUIT_NAME>.mag
and then routed by using the Magic shell:
source Magic/Routing/<CIRCUIT_NAME>_routing.tcl
A net-rules file contains information for the routing stage.
- To specify the needed minimum width of a nets wires put the lines
["MinNetWireWidth",
{
"net" : <SubCircuit_Instance>.<Net_name>,
"min_width" : <min_width>
}
]
If the net is located in the top-circuit the prefix <SubCircuit_Instance>. hasn't to be specified. The variable <min_width> defines the minimum width of the wire, whereby the unit of the width is in
E.g. for the netlist
x1 Vin1 Vout Vdd Vss buf
XR1 Vin Vin1 Vss sky130_fd_pr__res_xhigh_po_0p35 L=2 mult=1 m=1
XC1 Vin1 Vss sky130_fd_pr__cap_mim_m3_1 W=4 L=4 MF=1 m=1
.subckt buf A Y Vdd Vss
x1 A Y1 Vdd Vss inv
x2 Y1 Y Vdd Vss inv
.ends
.subckt inv A Y Vdd Vss
XM1 Y A Vss Vss sky130_fd_pr__nfet_01v8 L=1 W=1 nf=1 m=1
XM2 Y A Vdd Vdd sky130_fd_pr__pfet_01v8 L=1 W=3 nf=3 m=1
.ends
.end
the net Vout1 gets accessed by
["MinNetWireWidth",
{
"net" : Vout1,
"min_width" : 20
}
]
The net Y1 in the sub-circuit buf of device x1 gets accessed by
["MinNetWireWidth",
{
"net" : x1.Y1,
"min_width" : 20
}
]
In the following, the layout generation flow for the circuit Circuits/Examples/DiffAmp.spice, will be presented.
Run for example
python3 main_RP_placement.py
and place the circuit in Magic, per
python3 main_place_circuit.py
Resulting placement:
Run
python3 main_routing.py
and show the routing in Magic per
python3 main_place_route_circuit.py
Resulting routing:
