Spyglass

---

Please note that this project is in a very early stage. Use at your own risk. Think about contributing to the project if you find that something is not working, and you are able to fix it. Every contribution is appreciated.

---

A simple mjpeg server for Picamera2.

With Spyglass you are able to stream videos from a camera that is supported by libcamera like the Raspberry Pi Camera Module 3.

Prerequisites

• Raspberry Pi OS Bullseye
• Picamera2 - Already installed on Raspberry Pi OS Bullseye
• Python 3
• A camera supported by libcamera and connected to the Raspberry Pi

Quick Start

The server can be started with

./run.py

This will start the server with the following default configuration:

• Address the server binds to: 0.0.0.0
• Port: 8080
• Resolution: 640x480
• Framerate: 15fps
• Stream URL: /stream
• Snapshot URL: /snapshot

Configuration

On startup the following arguments are supported:

Argument	Description	Default
-b, --bindaddress	Address where the server will listen for new incoming connections.	0.0.0.0
-p, --port	Port where the server will listen for new incoming connections.	8080
-r, --resolution	Resolution of the captured frames. This argument expects the format x	640x480
-f, --fps	Framerate in frames per second (fps).	15
-st, --stream_url	Sets the URL for the mjpeg stream.	/stream
-sn, --snapshot_url	Sets the URL for snapshots (single frame of stream).	/snapshot
-af, --autofocus	Autofocus mode. Supported modes: manual, continous	continuous
-l, --lensposition	Set focal distance. 0 for infinite focus, 0.5 for approximate 50cm. Only used with Autofocus manual	0.0
-s, --autofocusspeed	Autofocus speed. Supported values: normal, fast. Only used with Autofocus continuous	normal

Starting the server without any argument is the same as

./run.py -b 0.0.0.0 -p 8080 -r 640x480 -f 15 -st '/stream' -sn '/snapshot' -af continous -l 0.0 -s normal

The stream can then be accessed at http://<IP of the server>:8080/stream

Using Spyglass with Mainsail

If you ant to use Spyglass as a webcam source for Mainsail add a webcam with the following configuration:

• URL Stream: /webcam/stream
• URL Snapshot: /webcam/snapshot
• Service: V4L-MJPEG

Install as application

If you want to install Spyglass globally on your machine you can use python -m pip install . to do so.