INSTALL_Cygwin.txt

************************************************************************
         HDF5 Build and Install Instructions for Cygwin
************************************************************************

This document is an instruction on how to build, test and install HDF5 library
on Cygwin.  See detailed information in hdf5/INSTALL.

NOTE: hdf5 can be built with CMake, see the INSTALL_CMake.txt file for more
guidance.

Preconditions:
--------------

1. Cygwin 3.5.1 or higher Installed

   To install the Cygwin net release, go to http://www.cygwin.com and
   click on "setup-x86_64.exe" under the heading
    "Current Cygwin DLL version". This will download a GUI
   installer called setup-x86_64.exe which can be run to download a complete
   Cygwin installation via the internet. Then follow the instructions
   on each screen to install Cygwin.

   Cygwin uses packages to manage installing various software. Users can
   choose to install or uninstall certain packages by running setup.exe.
   http://www.cygwin.com/packages/ provides detailed information about
   Cygwin packages.

   Most required dependencies can be satisfied by installing all packages in
   the "Devel" category.  However, please verify that you have installed all
   packages listed below.

2. Compilers, Libraries and Utilities Installed

   2.1 Compilers Supported

    The following compilers are supported by HDF5 and included in the Cygwin
    package system:
       gcc, which includes:
            gcc-core    : C compiler
            gcc-g++     : C++ compiler
            gcc-fortran : Fortran compiler


   2.1.1 Using Compilers Not Supported

       By default the current configuration uses vendor compilers; to use
        another compiler run the following commands before running
        configure:

        setenv CC   "foo -flags"
        setenv FC  "fffoo -flags"

       For example, if users want to use pgf90 as fortran compiler, then

            setenv FC pgf90

        See the configure help page (configure --help) for a list of
        environment variables that have an affect on building the
        library.

    2.2 HDF5 External Library Dependencies

    2.2.1 zlib

         zlib-1.2.8 or later is supported and tested.

    2.2.2 Szip

         libaec-1.1.2 or later is supported and tested.

    2.3 Additional Utilities

    The following standard utilities are also required to build and test HDF5:

        bison           : yacc implementation
        flex            : flex utility
        make            : make utility

    2.4 Alternate Build Process

    Download the CMake package and follow the notes in the "INSTALL_CMake.txt"
    file to build HDF5 with the CMake utilities.



Build, Test and Install HDF5 on Cygwin
--------------------------------------

1. Get HDF5 source code package
   Users can download the HDF5 source code from the official GitHub repository
   (https://github.com/HDFGroup/hdf5).

2. Unpacking the distribution

   The HDF5 source code is distributed in a variety of formats which
   can be unpacked with the following commands, each of which creates
   an `hdf5-2.0.x' directory.

   2.1 Non-compressed tar archive (*.tar)

          $ tar xf hdf5-2.0.x.tar

   2.2 Gzip'd tar archive (*.tar.gz)

          $ gunzip < hdf5-2.0.x.tar.gz | tar xf -

   2.3 Bzip'd tar archive (*.tar.bz2)

          $ bunzip2 < hdf5-2.0.x.tar.bz2 | tar xf -

2. Setup Environment

    In Cygwin, most compilers and setting are automatically detected during
    the configure script. However, if you are building Fortran, we recommend
    that you explicitly set the "FC" variable in your environment to use the
    gfortran compiler. For example, issue the command:

          $ export FC=gfortran

4. Configuring

   Notes: See detailed information in hdf5/release_docs/INSTALL_Autotools.txt.

   The host configuration file for Cygwin is located
   in the `config' directory and are based on architecture name,
   vendor name, and operating system which are displayed near the
   beginning of the `configure' output. The host config file influences
   the behavior of configure by setting or augmenting shell variables.

   In short,

   To configure HDF5 C Library, using

           $ ./configure

   To configure HDF5 C/C++ Library, using

           $ ./configure --enable-cxx

   To configure HDF5 C/Fortran Library, using

           $ ./configure --enable-fortran

   To configure HDF5 C with Szip library, using

           $ ./configure  --with-szlib="path to szlib"

       For example, if Szip library was installed in the directory
       /cygdrive/c/szip, which is parent directory of "include" and
       "lib", then the following command will configure HDF5 C library
       with Szip enabled:

           $ ./configure --with-szlib=/cygdrive/c/szip

   To configure HDF5 C without zlib,

       To disable zlib, using

           $ ./configure --without-zlib

   Two ways to configure HDF5 C with specified zlib

      Using

           $ ./configure --with-zlib=INCDIR,LIBDIR

       For example, if the zlib library is installed in
       /cygdrive/c/usr, which is the parent directory of directories
       "include" and "lib",

           $ ./configure --with-zlib=/cygdrive/c/usr/include,/cygdrive/c/usr/lib

      Through the CPPFLAGS and LDFLAGS Variables

       For example, if zlib was installed in the directory
       /cygdrive/c/usr then using the following command to configure
       HDF5 with zib

           $ CPPFLAGS=-I/cygdrive/c/usr/include \
           $ LDFLAGS=-L/cygdrive/c/usr/lib \
           $ ./configure

    To specify the installation directories, using

           $ ./configure --prefix="path for installation"

       By default, HDF5 library, header files, examples, and
       support programs will be installed in /usr/local/lib,
       /usr/local/include, /usr/local/doc/hdf5/examples, and
       /usr/local/bin. To use a path other than /usr/local specify
       the path with the `--prefix=PATH' switch as in the above
       command.

    Combination of Switches

       All of the above switches can be combined together. For
       example, if users want to configure HDF5 C/C++/Fortran
       library with Szip library enabled, with zlib library at
       /cygdrive/c/usr/, and install HDF5 into directory
       /cygdrive/c/hdf5 using gcc/g++ as C/C++ compiler and gfortran
       as fortran compiler

           $ ./configure
             --with-szlib=/cygdrive/c/szip
             --with-zlib=/cygdrive/c/usr/include,/cygdrive/c/usr/lib
             --prefix=/cygdrive/c/hdf5
             --enable-cxx
             --enable-fortran
             <"If no more switches, then hit Enter">

       Notes: The command format above is for readilibity. In practice,
              please type in the command above with at least one
              space between each line, No "Enter" until users finish
              the switches and want to run the configure.


     or do it through CPPFLAGS and LDFLAGS variables:

           $ CPPFLAGS=-I/cygdrive/c/usr/include \
           $ LDFLAGS=-L/cygdrive/c/usr/lib \

           $ ./configure
             --with-szlib=/cygdrive/c/szip
             --prefix=/cygdrive/c/hdf5
             --enable-cxx
             --enable-fortran
             <"If no more switches, then hit Enter">

5. Make and Make Check

   After configuration is done successfully, run the following series of
   commands to build, test and install HDF5

           $ make          > "output file name"
           $ make check    > "output file name"

   Before run "make install", check output file for "make check", there
   should be no failures at all.

6. Make Install

           $ make install  > "output file name"


7. Check installed HDF5 library

   After step 6, go to your installation directory, there should be
   three subdirectories: "bin" "include" and "lib".

8. Known Problems

   cache_api tests may fail. This is a known issue with Cygwin.

   "make check" fails when building shared lib files is enabled.  The default
   on Cygwin has been changed to disable shared.  It can be enabled with
   the --enable-shared configure option but is likely to fail "make check"
   with GCC compilers.

-----------------------------------------------------------------------

    HDF Forum:     https://forum.hdfgroup.org/
    HDF Helpdesk:  https://help.hdfgroup.org/