diff --git a/docs/construction.html b/docs/construction.html index f330a20..5be4f4a 100644 --- a/docs/construction.html +++ b/docs/construction.html @@ -205,7 +205,7 @@

-
Figure 3: Constraints on the base frame design.
+
Figure 3: Welding instructions for the base frame design.
@@ -221,7 +221,7 @@

-
Figure 5: Crank overview.
+
Figure 5: Welding instructions for the crank.
@@ -244,7 +244,7 @@

-
Figure 8: Detailed view of the side panel.
+
Figure 8: Welding instructions for the side panel.
@@ -266,7 +266,7 @@

-
Figure 11: Constraints imposed on the chain guide assembly.
+
Figure 11: Welding instructions for the chain guide assembly.
@@ -288,7 +288,7 @@

-
Figure 14: Constraints imposed on the drive train assembly.
+
Figure 14: Welding instructions for the drive train assembly.
@@ -304,7 +304,7 @@

-
Figure 16: Constraints imposed on the roller mounting platform assembly.
+
Figure 16: Welding instructions for the roller mounting platform assembly.
@@ -326,7 +326,7 @@

-
Figure 19: Constraints imposed on the roller bearing bracket assembly.
+
Figure 19: Welding instructions for the roller bearing bracket assembly.
@@ -348,7 +348,7 @@

-
Figure 22: Constraints imposed on the roller assembly.
+
Figure 22: Welding instructions for the roller assembly.
@@ -370,13 +370,13 @@

-
Figure 25: Constraints imposed on the large sprocket module.
+
Figure 25: Welding instructions for the large sprocket module.

2.10 Sprocket Module (Small)

-

Add the plate fixations (6) to the backplate (2), analogously to the large sprocket module - numbered parts shown in Figure 24. Attach the sprocket (3) to the front plate (1), then mount the front plate to the backplate.

+

Add the plate fixations (6) to the backplate (2), analogously to the large sprocket module - numbered parts shown in Figure 27. Attach the sprocket (3) to the front plate (1), then mount the front plate to the backplate.

@@ -392,7 +392,7 @@

-
Figure 28: Constraints imposed on the small sprocket module.
+
Figure 28: Welding instructions for the small sprocket module.

@@ -412,7 +412,7 @@

<

-
Figure 30: Upper side panel overview.
+
Figure 30: Upper side panel assembly.
@@ -424,7 +424,7 @@

<

-
Figure 32: Constraints imposed on the upper side panel assembly.
+
Figure 32: Welding instructions for the upper side panel assembly.
@@ -434,7 +434,7 @@

-
Figure 33: Cover assembly overview.
+
Figure 33: Cover assembly.

@@ -446,14 +446,14 @@

-
Figure 35: Constraints imposed on the cover.
+
Figure 35: Welding instructions for the cover.

3 Full Assembly

-

The recommended assembly order goes as follows. First, attach the large side panel (4), the crank side panel (6) with the crank (2), the drivetrain panel (5), the lower side panel (3), and the roller mounting platform (1) to the frame - numbered part list shown in Figure 36.

+

The recommended assembly order goes as follows. First, attach the large side panel (4), the crank side panel (6) with the crank (2), the drivetrain panel (5), the lower side panel (3), and the roller mounting platform (1) to the frame (7) - numbered part list shown in Figure 36.

diff --git a/docs/img/ETH_GHE_logo.svg b/docs/img/ETH_GHE_logo.svg new file mode 100644 index 0000000..6ec2f72 --- /dev/null +++ b/docs/img/ETH_GHE_logo.svg @@ -0,0 +1,106 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/docs/img/certification-mark-CH000022-wide.svg b/docs/img/certification-mark-CH000022-wide.svg new file mode 100644 index 0000000..4b014f0 --- /dev/null +++ b/docs/img/certification-mark-CH000022-wide.svg @@ -0,0 +1,35 @@ + + + + + + + + + + + CH000022 + + \ No newline at end of file diff --git a/docs/index.html b/docs/index.html index 7cb0d51..1287119 100644 --- a/docs/index.html +++ b/docs/index.html @@ -138,7 +138,7 @@

On this page

  • 1 Introduction
    • -
  • 2 Prototype overview
    • +
  • 2 Prototype Overview
  • 3 Part List
  • 4 Safety Precautions
  • 5 License
    • @@ -169,18 +169,22 @@

    Low-Cost Glass Crusher for Cape Maclear, Malawi

    -

    DOI

    +

    DOI

    Contributors:
    - Philippe Colbach ORCID logo 0009-0004-5631-8744 author, maintainer
    - Jakub Tkaczuk ORCID logo 0000-0001-7997-9423 supervisor, developer
    - Elizabeth Tilley ORCID logo 0000-0002-2095-9724 supervisor

    -

    Github repository for this page sits here.

    +
    +

    +

    This work is certified by the Open Source Hardware Association.
    +
    Github repository for this page sits here. +

    1 Introduction

    This documentation details the construction, operation, and maintenance of the glass crusher that was built as part of a collaboration between the Malawian nonprofit organization Sustainable Cape Maclear and the Global Health Engineering Group at ETH Zürich.

    -

    2 Prototype overview

    +

    2 Prototype Overview

    The glass crusher uses two roller mills to crush the glass. The rollers are rotated using a crank and a drivetrain made mostly from motorcycle parts. It is a mostly closed construction to shield the operator(s) from glass dust and shards.

    @@ -439,7 +443,7 @@

    5 License

    Footnotes

      -

    1. 24 x screw M6 x 16,1 x screw M6 x 20, 2 x screw M6 x 25, 12 x screw M6 x 30, 4 x screw M6 x 45, 2 x stud M6 x 20, 53 x nut M6, 67 x washer M6, 5 x screw M10 x 20
      12 x screw M10 x 30, 1 x stud M10 x 90, 2 x stud M10 x 120, 23 x nut M10, 19 x washer M10↩︎

      2. +

    2. 24 x screw M6 x 16, 1 x screw M6 x 20, 2 x screw M6 x 25, 12 x screw M6 x 30, 4 x screw M6 x 45, 2 x stud M6 x 20, 53 x nut M6, 67 x washer M6, 5 x screw M10 x 20
      12 x screw M10 x 30, 1 x stud M10 x 90, 2 x stud M10 x 120, 23 x nut M10, 19 x washer M10↩︎