windows.yml

name: Windows tests

on: [pull_request, push]

permissions:
  contents: read

jobs:
  cygwin:
# Run a job for each of the specified target architectures:
    strategy:
      matrix:
        os:
          - windows-2019
#          - windows-2022
        platform:
          - arch: win64
            oqsconfig: -DOQS_ALGS_ENABLED=STD
#          - arch: win32
#            config: --strict-warnings no-fips enable-quic
    runs-on: ${{matrix.os}}
    env:
      CYGWIN_NOWINPATH: 1
      SHELLOPTS: igncr
# Don't overwhelm github CI VMs:
      MAKE_PARAMS: -j 4
    steps:
      - name: Checkout provider
        uses: actions/checkout@v3
      - name: Checkout openssl
        uses: actions/checkout@v3
        with:
          set-safe-directory: true
          repository: openssl/openssl
          path: openssl
      - name: checkout liboqs
        uses: actions/checkout@v3
        with:
          set-safe-directory: true
          repository: open-quantum-safe/liboqs
          ref: main
          path: liboqs
      - name: Install cygwin
        uses: cygwin/cygwin-install-action@master
        with:
          packages: perl git ninja gcc-core cmake make
      - name: Retrieve OpenSSL32 from cache
        id: cache-openssl32
        uses: actions/cache@v3
        with:
          path: c:\cygwin\opt\openssl32
          key: ${{ runner.os }}-cygwinopenssl32
      - name: Set installpath
        run: |
           echo "IP=$(cygpath -u $PWD)/.local" >> "$env:GITHUB_ENV"
      - name: build liboqs
        run: |
           which cmake
           cmake --version
           gcc --version
           mkdir _build
           cd _build
           cmake -GNinja -DOPENSSL_ROOT_DIR=/opt/openssl32 -DCMAKE_INSTALL_PREFIX="${{ env.IP }}" ${{ matrix.platform.oqsconfig }} -DCMAKE_C_COMPILER=gcc ..
           ninja
           ninja install
        working-directory: liboqs
      - name: Build openssl3 if not cached
        if: steps.cache-openssl32.outputs.cache-hit != 'true'
        run: bash -c "./config --prefix=/opt/openssl32 ${{ matrix.platform.config }} && perl configdata.pm --dump && make $MAKE_PARAMS && make install_sw"
        working-directory: openssl
      - name: Check OpenSSL install3
        run: dir c:\cygwin\opt\openssl32
      - name: Save OpenSSL
        id: cache-openssl-save
        if: steps.cache-openssl32.outputs.cache-hit != 'true'
        uses: actions/cache/save@v3
        with:
          path: |
            c:\cygwin\opt\openssl32
          key: ${{ runner.os }}-cygwinopenssl32
      - name: build oqs-provider
        run: bash -c "git config --global --add safe.directory $(cygpath -u $PWD) && liboqs_DIR='${{ env.IP }}' cmake -GNinja -DCMAKE_C_COMPILER=gcc -DOPENSSL_ROOT_DIR=/opt/openssl32 -S . -B _build && cd _build && ninja && cd .."
      - name: Check Openssl providers
        run: bash -c "OPENSSL_MODULES=_build/lib /opt/openssl32/bin/openssl list -providers -provider oqsprovider -provider default"
      - name: Run tests
        run: bash -c "echo $PATH && PATH=/opt/openssl32/bin:/usr/bin ctest -V"
        working-directory: _build
      - name: Retain oqsprovider.dll
        uses: actions/upload-artifact@v3
        with:
          name: oqs-provider-cygwin
          path: D:/a/oqs-provider/oqs-provider/_build/bin/oqsprovider.dll

  msvc:
# Run a job for each of the specified target architectures:
    strategy:
      matrix:
        os:
          - windows-2019
#          - windows-2022
        platform:
          - arch: win64
            oqsconfig: -DOQS_ALGS_ENABLED=STD
            osslconfig: no-shared no-fips VC-WIN64A-masm
#          - arch: win32
#            oqsconfig: -DOQS_ALGS_ENABLED=STD
#            osslconfig: --strict-warnings no-fips enable-quic
    runs-on: ${{matrix.os}}
    steps:
      - name: Restore OpenSSL32 cache
        id: cache-openssl32
        uses: actions/cache@v3
        with:
          path: c:\openssl32
          key: ${{ runner.os }}-msvcopenssl32
      - uses: actions/checkout@v3
      - name: Checkout OpenSSL master
        if: steps.cache-openssl32.outputs.cache-hit != 'true'
        uses: actions/checkout@v3
        with:
          set-safe-directory: true
          repository: openssl/openssl
          path: openssl
      - uses: actions/checkout@v3
        with:
          set-safe-directory: true
          repository: open-quantum-safe/liboqs
          path: liboqs
      - uses: ilammy/msvc-dev-cmd@v1
        with:
          arch: ${{ matrix.platform.arch }}
      - name: Setup nasm for OpenSSL build
        uses: ilammy/setup-nasm@v1
        if: steps.cache-openssl32.outputs.cache-hit != 'true'
        with:
          platform: ${{ matrix.platform.arch }}
      - name: Setup perl for OpenSSl build
        uses: shogo82148/actions-setup-perl@v1
        if: steps.cache-openssl32.outputs.cache-hit != 'true'
# OQS_USE_OPENSSL=OFF by default on Win32
# if cmake --build fails, try explicit
# cd _build && msbuild ALL_BUILD.vcxproj -p:Configuration=Release
# fails:          cmake -DCMAKE_C_FLAGS="/wd5105" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX="c:\liboqs" ${{ matrix.platform.oqsconfig }} -S . -B _build
#          cd _build && msbuild ALL_BUILD.vcxproj -p:Configuration=Release && cd ..
#          cmake --install _build
      - name: build liboqs
        run: |
          cmake --version
          mkdir build
          cd build
          cmake -GNinja -DCMAKE_C_FLAGS="/wd5105" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX="c:\liboqs" ${{ matrix.platform.oqsconfig }} -DOQS_DIST_BUILD=ON ..
          ninja
          ninja install
        working-directory: liboqs
      - name: prepare the OpenSSL build directory
        if: steps.cache-openssl32.outputs.cache-hit != 'true'
        run: mkdir _build
        working-directory: openssl
      - name: OpenSSL config
        if: steps.cache-openssl32.outputs.cache-hit != 'true'
        working-directory: openssl\_build
        run: |
          perl ..\Configure --banner=Configured --prefix=c:\openssl32 no-makedepend ${{ matrix.platform.osslconfig }}
          perl configdata.pm --dump
      - name: OpenSSL build
        if: steps.cache-openssl32.outputs.cache-hit != 'true'
        working-directory: openssl\_build
        run: nmake /S
# Skip testing openssl for now
#      - name: test
#        working-directory: openssl\_build
#        run: nmake test VERBOSE_FAILURE=yes TESTS=-test_fuzz* HARNESS_JOBS=4
      - name: OpenSSL install
        # Run on 64 bit only as 32 bit is slow enough already
        if: steps.cache-openssl32.outputs.cache-hit != 'true'
        run: |
          mkdir c:\openssl32
          nmake install_sw
        working-directory: openssl\_build
      - name: Save OpenSSL
        id: cache-openssl-save
        if: steps.cache-openssl32.outputs.cache-hit != 'true'
        uses: actions/cache/save@v3
        with:
          path: |
            c:\openssl32
          key: ${{ runner.os }}-msvcopenssl32
      - name: build oqs-provider
        run: |
          cmake -GNinja -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_FLAGS="/wd5105" -DOPENSSL_ROOT_DIR="c:\openssl32" -Dliboqs_DIR="c:\liboqs\lib\cmake\liboqs" -S . -B _build
          cd _build
          ninja
      - name: Run tests
        run: |
          ctest -V --test-dir _build
      - name: Retain oqsprovider.dll
        uses: actions/upload-artifact@v3
        with:
          name: oqs-provider-msvc
          path: D:/a/oqs-provider/oqs-provider/_build/lib/oqsprovider.dll

  msvc_native:
# Run a job for each of the specified target architectures:
    strategy:
      matrix:
        os:
#          - windows-2019
          - windows-2022
        platform:
          - arch: win64
            oqsconfig: -DOQS_ALGS_ENABLED=STD
            osslconfig: no-shared no-fips VC-WIN64A
        toolchain: 
        - .CMake/toolchain_windows_amd64.cmake
        msarch:
          - x64
        type:
#          - Debug
          - Release
    runs-on: ${{matrix.os}}
    steps:
        - name: Restore native OpenSSL32 cache
          id: cache-openssl32n
          uses: actions/cache@v3
          with:
            path: c:\openssl32n
            key: ${{ runner.os }}-msvcopenssl32n
        - uses: actions/checkout@v3
        - name: Checkout OpenSSL master
          if: steps.cache-openssl32n.outputs.cache-hit != 'true'
          uses: actions/checkout@v3
          with:
            set-safe-directory: true
            repository: openssl/openssl
            path: openssl
        - uses: actions/checkout@v3
          with:
            set-safe-directory: true
            repository: open-quantum-safe/liboqs
            path: liboqs
        - uses: ilammy/msvc-dev-cmd@v1
          with:
            arch: ${{ matrix.platform.arch }}
        - name: Add msbuild to PATH
          uses: microsoft/setup-msbuild@v1
          with:
            msbuild-architecture: ${{matrix.msarch}}
            vs-version: '[16.10,]'
        - name: Setup nasm for OpenSSL build
          uses: ilammy/setup-nasm@v1
          if: steps.cache-openssl32n.outputs.cache-hit != 'true'
          with:
            platform: ${{ matrix.platform.arch }}
        - name: Setup perl for OpenSSL build
          uses: shogo82148/actions-setup-perl@v1
          if: steps.cache-openssl32n.outputs.cache-hit != 'true'
        - name: build liboqs
          run: |
            cmake --version
            cmake -B build --toolchain ${{ matrix.toolchain }} .
            cmake --build build 
            cmake --build build --target INSTALL
          working-directory: liboqs
        - name: prepare the OpenSSL build directory
          if: steps.cache-openssl32n.outputs.cache-hit != 'true'
          run: mkdir _build
          working-directory: openssl
        - name: OpenSSL config
          if: steps.cache-openssl32n.outputs.cache-hit != 'true'
          working-directory: openssl\_build
          run: |
            perl ..\Configure --banner=Configured --prefix=c:\openssl32n no-makedepend ${{ matrix.platform.osslconfig }}
            perl configdata.pm --dump
        - name: OpenSSL build
          if: steps.cache-openssl32n.outputs.cache-hit != 'true'
          working-directory: openssl\_build
          run: nmake /S
        - name: OpenSSL install
# Run on 64 bit only as 32 bit is slow enough already
          if: steps.cache-openssl32n.outputs.cache-hit != 'true'
          run: |
            mkdir c:\openssl32n
            nmake install_sw
          working-directory: openssl\_build
        - name: Save OpenSSL
          id: cache-openssl-save
          if: steps.cache-openssl32n.outputs.cache-hit != 'true'
          uses: actions/cache/save@v3
          with:
            path: |
              c:\openssl32n
            key: ${{ runner.os }}-msvcopenssl32n
        - name: build oqs-provider
          run: |
            cmake -DCMAKE_BUILD_TYPE=${{ matrix.type }} -DCMAKE_C_FLAGS="/wd5105" -DOPENSSL_ROOT_DIR="c:\openssl32n" -Dliboqs_DIR="c:\liboqs\lib\cmake\liboqs" -S . -B _build
            cmake --build _build --config=${{ matrix.type }}
        - name: Run tests
          run: |
            ctest --test-dir _build -C ${{ matrix.type }}
        - name: Retain oqsprovider.dll
          uses: actions/upload-artifact@v3
          with:
            name: oqs-provider-msvc
            path: D:/a/oqs-provider/oqs-provider/_build/lib/oqsprovider.dll