Home
Important
The microcontroller on this board runs at 3.3V, which means that you must never apply more than 3.3V to its Digital and Analog pins.
| Board | |||
|---|---|---|---|
| Name | Minino | ||
| Microcontroller | |||
| RP2040 | |||
| USB connector | |||
| USB-C | |||
| Pins | |||
| Digital I/O Pins | 1 (D11) | ||
| Connectivity | |||
| WiFi | ESP32-C6-WROOM-1 ESPRESSIF module | ||
| GPS | ATGM336H Zhongkewei module | ||
| Communication | |||
| UART | Yes | ||
| I2C | Yes | ||
| Power | |||
| I/O Voltage | 3.3V | ||
| Supported battery | 3xAAA, holder included | ||
| Clock speed | |||
| Main Processor | RP2040 133 MHz | ||
| WiFi/Bluetooth Processor | ESP32-C6 up to 160 MHz | ||
| Memory | |||
| RP2040 | 264KB SRAM | ||
| ESP32-C6 | 512KB HP SRAM | ||
| Dimensions | |||
| Width | 82.5 mm | ||
| Length | 110 mm | ||
| Schematics | CAD Files | Case STL | Data Sheet |
Thank you for reading our Wiki!