diff --git a/wiki/Assembling.md b/wiki/Assembling.md
new file mode 100644
index 0000000..55c1c38
--- /dev/null
+++ b/wiki/Assembling.md
@@ -0,0 +1,8 @@
+# Assembling
+
+In order to get proper matching set you should:
+- insert pins in your best backplate (straightest)
+- press bushings in the shuttle and ensure a smooth mating between the parts.
+- if everything feels smooth, pop the bushings out and glue them in place using either superglue or epoxy.
+- be sure to test that the mating still feels smooth after the glue sets.
+- You can now use the shuttle as a "master blank" for glueing the pins into all your backplates.
diff --git a/wiki/Configuration.md b/wiki/Configuration.md
index 000e540..db2dc00 100644
--- a/wiki/Configuration.md
+++ b/wiki/Configuration.md
@@ -3,7 +3,13 @@
 Toolchangers start with number 0, and count up. So for all the configs, make sure you change all sections. IE, in your T1 config, make sure its extruder1, fan1, etc. See the examples.  **NOTE: The only except to this rule is T0 extruder has no number.**
 
 1. [Toolhead Configuration](#toolheads-configuration)
+2. [CANbus](#canbus)
 
 ## Toolheads Configuration
 
 Coming Soon
+
+
+## CANbus
+
+[voron_canbus](https://github.com/Esoterical/voron_canbus) this is a pretty definitive guide for canbus implementation on klipper.
diff --git a/wiki/Home.md b/wiki/Home.md
index 644d998..a3edbfd 100644
--- a/wiki/Home.md
+++ b/wiki/Home.md
@@ -15,11 +15,12 @@ Currently we support the standard Stealth Burner, Dragon Burner, and Rapid Burne
 
 1. [Bill of Materials](BOM)
 2. [Printing](Printing)
-3. [Installation](Installation)
-4. [Configuration](Configuration)
-5. [Docks](Docks)
-6. [Support and FAQs](Support)
-7. [Contributors](Contributors)
+3. [Assembling](Assembling)
+4. [Installation](Installation)
+5. [Configuration](Configuration)
+6. [Docks](Docks)
+7. [Support and FAQs](Support)
+8. [Contributors](Contributors)
 
 **Printed Parts (Dragonburner) by ZombieHedgehog**