Force Walk after getting out of vehicle

[DerZade]

Reported by Bagellord on the Steam Workshop:

Hey - noticed an odd issue the other night. I had a mission where we started off in freefall, and used the mission editor module to put the backpacks on chest then added a parachute using the module. Everything was fine and dandy when we got to the ground - ditched our reserve chutes and put the backpacks on our backs, but when we got into a vehicle and then back out, it thought the pack was on front again and forced us to walk slow. Had to switch backpack to chest, then back off again. This occurred even if you didn't have have a pack when you got into a vehicle.

Corresponding Video:
https://www.youtube.com/watch?v=BGF1vUYMr1o

[bagellord]

Just as a clarification to this - I could only reproduce this on a dedicated server using the BI dedicated server tools.

[DerZade]

@bagellord I now tried this several times on different servers and couldn't reproduce it.
Any ideas?

[bagellord]

The steps, as I remember were these:

1. Create a mission file with just the bare minimum mods
2. Add the backpack on chest module and sync it to a unit that has a backpack, and place a vehicle to get in
3. Set the character to start in freefall
4. Start the mission on dedicated
5. Land on the ground successfully
6. Drop the reserve chute and switch the backpack to your back
7. Get in vehicle
8. Get out - it'll behave like you've got a backpack on your chest even if you do not.

I attached my mission file to test with. Must be on a dedicated server.

Backpack%20On%20Chest%20Testing.VR.zip