From 0770d32ccd5f4505b9362026087e5b1ee34309bf Mon Sep 17 00:00:00 2001 From: wauswaus <70056029+wauswaus@users.noreply.github.com> Date: Sat, 19 Sep 2020 14:38:49 +0200 Subject: [PATCH 1/8] Create nas-pd03z.xml --- config/shenzen_neo/nas-pd03z.xml | 1 + 1 file changed, 1 insertion(+) create mode 100644 config/shenzen_neo/nas-pd03z.xml diff --git a/config/shenzen_neo/nas-pd03z.xml b/config/shenzen_neo/nas-pd03z.xml new file mode 100644 index 0000000000..8b13789179 --- /dev/null +++ b/config/shenzen_neo/nas-pd03z.xml @@ -0,0 +1 @@ + From 4dd0028b456ded2e943f106cb276eb1b753f1880 Mon Sep 17 00:00:00 2001 From: wauswaus <70056029+wauswaus@users.noreply.github.com> Date: Sat, 19 Sep 2020 15:15:50 +0200 Subject: [PATCH 2/8] Update nas-pd03z.xml --- config/shenzen_neo/nas-pd03z.xml | 116 +++++++++++++++++++++++++++++++ 1 file changed, 116 insertions(+) diff --git a/config/shenzen_neo/nas-pd03z.xml b/config/shenzen_neo/nas-pd03z.xml index 8b13789179..6e3df34cec 100644 --- a/config/shenzen_neo/nas-pd03z.xml +++ b/config/shenzen_neo/nas-pd03z.xml @@ -1 +1,117 @@ + + + + + Neo (Coolcam) NAS-PD03Z Motion Sensor (PIR) Version 2 + images/shenzen_neo/nas-pd02z.png + Press button in sensor once. If successfull, LED will blink one time. + Set gateway in inclusion mode. Press button in sensor three times. LED will flash red five times and then on and off alternately. + Set gateway in exclusion mode. Press button in sensor three times. LED will flash red five times and then on and off alternately. + Press and hold button the button in sensor for 10-15 seconds. LED will one time first and then five times on and off alternately. Release button. + + Initial version, based on PD02Z file + + + + + + Adapt the sensitivity of the motion detection where 8 means highest sensibility and 255 lowest. + + + + This parameter can be determined how long the associated devices should stay ON status. + For instance, this parameter is set to 30(second), the PIR detector will send a BASIC_SET Command to an associated device with value basic set level if PIR detector is triggered and the associated device will be turned on 30(second) before it is turned off. + This Parameter value must be large than Parameter 6# - Retrigger interval. + Available Settings:5 to 600(second). + + + + + Basic Set Command will be sent, on the associated devices (group 2), where contains a value when PIR detector is triggered, the receiver will take it for consideration; for instance, if a lamp module is received the Basic Set Command of which value is decisive as to how bright of dim level of lamp module shall be. + This Parameter is used to some associated devices. + Available Settings: 0, 1 to 99 or 255. + + + + + + Enable the motion detection (PIR) function. + This parameter does not effect the luminance reporting. + + + + + + + + Define the illumination level value which determines when the 'Illumination switch ON function' is activated. + If the illumination level falls below this value and a person moves across or within the detected area, the motion sensor will switch on the associated device (group 2). + 0 to 1000(Lux). + + + + + + Period after motion detection in which the sensor is insensitive for new motion detection. + This value must be less than the 'Motion detection ON time'. + Available Settings: 1 to 8(s). + + + + + + Determine the time between illumination reports, even when value has not changed. + NOTE: This Value Must Be less than Wakeup Interval Time. + Available Settings: 60 ~ 36000(second). + + + + + + Enable the function to switch on a associated device (group 2) once motion has been detected and the illumination level will be less than the value specified in 'Illumination switch ON level'. + + + + + + + This parameter defines by how much Lux Level must change, in lux, to be reported to the main controller. + + + + This parameter is configured the value that differential between current measured and previous report value. If the differential value larger than the settings, device will report this measured temperature value to nodes associated in lifeline. + + + + This parameter can enabled or disable the PIR led blinking function. + + + + + + The motion detected event can be sent multiple times/only once until device report motion cleared event. + + + + + + This parameter defines the calibrated scale for ambient light intensity. + + + + + + + + + + + + + From 004681d038382c4a75f51e97cf1a9c02150a20cc Mon Sep 17 00:00:00 2001 From: wauswaus <70056029+wauswaus@users.noreply.github.com> Date: Sat, 26 Sep 2020 13:28:48 +0200 Subject: [PATCH 3/8] Update nas-pd03z.xml --- config/shenzen_neo/nas-pd03z.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/config/shenzen_neo/nas-pd03z.xml b/config/shenzen_neo/nas-pd03z.xml index 6e3df34cec..ffe6209a2f 100644 --- a/config/shenzen_neo/nas-pd03z.xml +++ b/config/shenzen_neo/nas-pd03z.xml @@ -8,6 +8,7 @@ Does not figure on https://products.z-wavealliance.org --> Neo (Coolcam) NAS-PD03Z Motion Sensor (PIR) Version 2 + https://www.szneo.com/en/products/show.php?id=197 images/shenzen_neo/nas-pd02z.png Press button in sensor once. If successfull, LED will blink one time. Set gateway in inclusion mode. Press button in sensor three times. LED will flash red five times and then on and off alternately. From 4d44bb79c6a0adb63856aa19e11bf20806d96425 Mon Sep 17 00:00:00 2001 From: wauswaus <70056029+wauswaus@users.noreply.github.com> Date: Sat, 26 Sep 2020 13:31:46 +0200 Subject: [PATCH 4/8] Update manufacturer_specific.xml Added PD03Z --- config/manufacturer_specific.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/config/manufacturer_specific.xml b/config/manufacturer_specific.xml index a37868bcc0..865e9cd3c3 100644 --- a/config/manufacturer_specific.xml +++ b/config/manufacturer_specific.xml @@ -1573,6 +1573,7 @@ + From 40b3d2d1c796a555d8ac6639de631659f4acaa40 Mon Sep 17 00:00:00 2001 From: wauswaus <70056029+wauswaus@users.noreply.github.com> Date: Sat, 26 Sep 2020 13:39:11 +0200 Subject: [PATCH 5/8] Update nas-pd03z.xml --- config/shenzen_neo/nas-pd03z.xml | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/config/shenzen_neo/nas-pd03z.xml b/config/shenzen_neo/nas-pd03z.xml index ffe6209a2f..1cf713d726 100644 --- a/config/shenzen_neo/nas-pd03z.xml +++ b/config/shenzen_neo/nas-pd03z.xml @@ -1,10 +1,9 @@ - + Neo (Coolcam) NAS-PD03Z Motion Sensor (PIR) Version 2 From 7eb909dbf49f3b7dbe0d85ad02de81bb91146fcf Mon Sep 17 00:00:00 2001 From: wauswaus <70056029+wauswaus@users.noreply.github.com> Date: Sat, 26 Sep 2020 13:46:26 +0200 Subject: [PATCH 6/8] Update manufacturer_specific.xml --- config/manufacturer_specific.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/config/manufacturer_specific.xml b/config/manufacturer_specific.xml index 865e9cd3c3..a05a6d9977 100644 --- a/config/manufacturer_specific.xml +++ b/config/manufacturer_specific.xml @@ -1,5 +1,5 @@ - + From b6fa6ec88275af9ea1860e2399b2b52567b504e4 Mon Sep 17 00:00:00 2001 From: wauswaus <70056029+wauswaus@users.noreply.github.com> Date: Sat, 26 Sep 2020 14:02:21 +0200 Subject: [PATCH 7/8] Update nas-pd03z.xml --- config/shenzen_neo/nas-pd03z.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/config/shenzen_neo/nas-pd03z.xml b/config/shenzen_neo/nas-pd03z.xml index 1cf713d726..2293bc30bc 100644 --- a/config/shenzen_neo/nas-pd03z.xml +++ b/config/shenzen_neo/nas-pd03z.xml @@ -100,7 +100,7 @@ - + This parameter defines the calibrated scale for ambient light intensity. From 6daeb796fd3820a5dde67c2e5149ee9b26639f70 Mon Sep 17 00:00:00 2001 From: wauswaus <70056029+wauswaus@users.noreply.github.com> Date: Sat, 26 Sep 2020 14:07:21 +0200 Subject: [PATCH 8/8] Update nas-pd03z.xml Changed int to short for parameter 99 --- config/shenzen_neo/nas-pd03z.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/config/shenzen_neo/nas-pd03z.xml b/config/shenzen_neo/nas-pd03z.xml index 2293bc30bc..96ed23f485 100644 --- a/config/shenzen_neo/nas-pd03z.xml +++ b/config/shenzen_neo/nas-pd03z.xml @@ -100,7 +100,7 @@ - + This parameter defines the calibrated scale for ambient light intensity.