arrX

Create multiple (Sonarr / Radarr / Bazarr) containers

Read through this entire page, even if you are only installing one of the apps. The instructions at the bottom of the page assume you have read the material at the top of the page.

Background

There are several roles in the community repo which can be used to create an arbitrary number of instances of a given application. As of this writing, they are:

Role	Description
bazarrx	Subtitle downloading
lidarrx	Music management
ombix	Request management
radarrx	Movie management
readarrx	Ebook management
requestrrx	Discord request bot
sonarrx	TV management
transmissionx	Torrent client

They're all named somethingX because they allow creation of X number of something.

This started as a generalized replacement for the radarr4k and sonarr4k roles which were removed from cloudbox.

They are all configured in the same way.

In general terms, you'll enter the instances you want into settings.yml:

appnamex:
  roles: ["", bing, bang, boing]

That will create:

• appname
• appnamebing
• appnamebang
• appnameboing

as docker containers, subdomain, and data directories in /opt when you run the relevant tag.

For example, with this configuration:

sonarrx:
  roles: ["", bing, bang, boing]

Running the community sonarrx tag would produce:

entry	Container	Config dir	Subdomain	Note
""	sonarr	/opt/sonarr	sonarr.YOURDOMAIN.TLD	Replaces the stock container
bing	sonarrbing	/opt/sonarrbing	sonarrbing.YOURDOMAIN.TLD
bang	sonarrbang	/opt/sonarrbang	sonarrbang.YOURDOMAIN.TLD
boing	sonarrboing	/opt/sonarrboing	sonarrboing.YOURDOMAIN.TLD

NOTE: the names have to be compliant with both domain names and docker names, so no funny business. Do not use anything but a-z and 0-9, no spaces, no commas, no colons, no dash, no exclamation marks, no nothing!

The names, within the constraints above, are completely arbitrary. There is nothing magic about the example configs [1080webdl, 1080remux] given below. They represent some common use cases, but you can use whatever names you wish, as in the "bing, bang, boing" examples above.

You will need to configure these new containers just as you did the stock containers. One change; be sure each one gets a unique download category, so that each instance imports only those downloads meant for it.

Also, you probably want to put some thought into the directory and library structure you want to use. See "Customizing Plex Libraries".

Overwriting the stock container

The example above shows a "" config entry. For those apps which are also found in the stock cloudbox install, this will overwrite the existing container. Then, when you rerun the cloudbox tag, this container will get overwritten by the stock one again. You probably don't want that.

For one thing, these "arrX" roles may be based on different images than the stock images. For example, for a while the radarrx role installed Radarr v3 while the stock role installed v2. You should pick one: use this role to replace the stock one, or not.

You probably want to overwrite your existing role with this one; that will ensure that all your instances of Sonarr are based on the same image and get updated in the same way. It's up to you, though, how you want to manage them.

If you want to use this to overwrite your existing Sonarr/Radarr/etc container:

1. Include a "" entry in the config:

   sonarrx:
     roles: ["", bing, bang, boing]

2. Run the role as described below.

   cd ~/community
   sudo ansible-playbook community.yml --tags sonarrx

3. Add the stock tag to the [skip] section in ~/cloudbox/ansible.cfg:

   [tags]
   skip = sonarr,whatever,whatever
   

That will ensure that the stock sonarr tag doesn't overwrite the container you are creating here.

When you want to update Sonarr, you'll run the Community sonarrx tag instead.

The same thing holds for every arrX variant discussed here.

If you DO NOT want to overwrite your existing Sonarr/Radarr/etc container:

1. Make sure there IS NOT a "" entry in the config:

   sonarrx:
     roles: [bing, bang, boing]

That's all. Your existing sonarr container will not be touched.

Again, the same thing holds for every arrX variant discussed here.

Create multiple Sonarr v3 containers

1. Edit settings.yml and change the sonarrx roles to what you want:

   I want to add a 4K version and leave my existing container untouched.

   
   

   sonarrx:
     roles: [ 4k ]

   I want to add webdl and remux versions and leave my existing container untouched.

   
   

   sonarrx:
     roles: [ 1080webdl, 1080remux ]

   I want to replace my existing version and add reality and kids versions.

   
   

   sonarrx:
     roles: [ "", reality, kids ]

   Refer to the notes above about overwriting the default container.

2. Run the sonarrx role as a normal community role.

   cd ~/community
   sudo ansible-playbook community.yml --tags sonarrx

Remember that all those names are arbitrary and purely cosmetic for your own use. There is nothing that ties sonarrreality.YOURDOMAIN.TLD to reality TV aside from the configuration that you are going to give it.

Create multiple Radarr containers

1. Edit settings.yml and change the radarrx roles to what you want:

   I want to add a 4K version and leave my existing container untouched.

   
   

   radarrx:
     roles: [ 4k ]

   I want to add webdl and remux versions and leave my existing container untouched.

   
   

   radarrx:
     roles: [ 1080webdl, 1080remux ]

   I want to replace my existing version and add documentary and kids versions.

   
   

   radarrx:
     roles: [ "", documentary, kids ]

   Refer to the notes above about overwriting the default container.

2. Run the radarrx role as a normal community role.

   cd ~/community
   sudo ansible-playbook community.yml --tags radarrx

Remember that all those names are arbitrary and purely cosmetic for your own use. There is nothing that ties radarrdocumentary.YOURDOMAIN.TLD to documentary movies aside from the configuration that you are going to give it.

Create multiple Bazarr containers

1. Edit settings.yml and change the bazarrx roles to what you want:

   I want to add a 4K version and leave my existing container untouched.

   
   

   bazarrx:
     roles: [ 4k ]

   I want to add webdl and remux versions and leave my existing container untouched.

   
   

   bazarrx:
     roles: [ 1080webdl, 1080remux ]

   I want to replace my existing version and add documentary and kids versions.

   
   

   bazarrx:
     roles: [ "", documentary, kids ]

   Refer to the notes above about overwriting the default container.

2. Run the bazarrx role as a normal community role.

   cd ~/community
   sudo ansible-playbook community.yml --tags bazarrx

Remember that all those names are arbitrary and purely cosmetic for your own use. There is nothing that ties bazarrdocumentary.YOURDOMAIN.TLD to documentary movies aside from the configuration that you are going to give it.

Create a single Bazarr container

1. Edit settings.yml and change the bazarrx roles to:

   bazarrx:
    roles: [""]
   

2. Run the bazarrx role as a normal community role.

   cd ~/community
   sudo ansible-playbook community.yml --tags bazarrx

Get Sonarr4k and Radarr4k Containers Again

1. Refer to the first example under the "Multiple Radarr/Sonarr" sections above.

2. Containers should be up and running again. With the same paths as were setup with CB, i.e. your data will have been migrated over if you had the original "radarrx" and "sonarrx" installed.

Tips

Radarr

Caching

If you use NZBHydra2 as an indexer in Radarr create a duplicate entry with caching enabled as an additional parameter. Repeat for Sonarr.

Setting up Sonarr and Radarr in Bazarr

During the initial install of Bazarr, use either of the following setups to set up Sonarr and Radarr

• Hostname or IP Address: name of your Radarr/Sonarr container
• Listening port: 8989
• Base URL: empty
• SSL Enabled: no
• API Key: API Key retrieved from Sonarr/Radarr settings -> general

• Hostname or IP Address: full domain of your Radarr/Sonarr instance, do not specify https (e.g., sonarr.example.com)
• Listening port: 443
• Base URL: empty
• SSL Enabled: yes
• API Key: API Key retrieved from Sonarr/Radarr settings -> general

The latter may be simpler if you are configuring multiple BazarrX instances connected to multiple RadarrX/SonarrX instances, since you won't need to gather the ports for each individual instance.