cmake.yml

name: CMake Build

# Controls when the action will run. Triggers the workflow on push or pull request
# events but only for the master branch
on:
  push:
    branches:
      - rel/*
      - dev/*
      - main
  pull_request:
    branches:
      - rel/*
      - dev/*
      - main

env:
  # Customize the CMake build type here (Release, Debug, RelWithDebInfo, etc.)
  BUILD_TYPE: Release
  VCPKG_GIT_REF: 8a9a97315aefb3f8bc5d81bf66ca0025938b9c91

jobs:
  # TODO: Some day add support for building on Windows.
  #
  # build-windows:
  #   runs-on: windows-latest

  #   steps:
  #     - uses: actions/checkout@v1

  #     - name: Install pytest for easier to read test results
  #       run: python3 -m pip install pytest

  #     - uses: lukka/get-cmake@latest

  #     # Restore from cache the previously built ports. If cache-miss, download, build vcpkg ports.
  #     - name: Restore LLVM vcpkg port from cache or install vcpkg and build LLVM port
  #       # Download and build vcpkg, without installing any port. If content is cached already, it is a no-op.
  #       uses: lukka/run-vcpkg@v5
  #       id: runvcpkg
  #       with:
  #         vcpkgArguments: "llvm"
  #         vcpkgGitCommitId: "${{ env.VCPKG_GIT_REF }}"
  #         vcpkgTriplet: "x64-windows"

  #     - name: Print the VCPKG_ROOT & VCPKG_TRIPLET (for debugging)
  #       shell: bash
  #       run: echo "'${{ steps.runvcpkg.outputs.RUNVCPKG_VCPKG_ROOT_OUT }}' '${{ steps.runvcpkg.outputs.RUNVCPKG_VCPKG_TRIPLET_OUT }}' "

  #     - name: dir the VCPKG_ROOT
  #       run: dir ${{ steps.runvcpkg.outputs.RUNVCPKG_VCPKG_ROOT_OUT }}

  #     - name: Create Build Directory
  #       shell: bash
  #       # Some projects don't allow in-source building, so create a separate build directory
  #       # We'll use this as our working directory for all subsequent commands
  #       run: cmake -E make_directory ${{runner.workspace}}/build

  #     - name: Run CMake+Ninja with triplet (cmd)
  #       uses: lukka/run-cmake@main
  #       id: runcmake_cmd
  #       with:
  #         cmakeGenerator: "Ninja" # Visual Studio 15 2017
  #         cmakeListsOrSettingsJson: "CMakeListsTxtBasic"
  #         cmakeListsTxtPath: "${{runner.workspace}}/clamav-bytecode-compiler/CMakeLists.txt"
  #         useVcpkgToolchainFile: true
  #         cmakeAppendedArgs: '-A x64 -DCMAKE_TOOLCHAIN_FILE="$VCPKG_ROOT/scripts/buildsystems/vcpkg.cmake" -DENABLE_EXAMPLES=ON -- -v'
  #         cmakeBuildType: "${{ env.BUILD_TYPE }}"
  #         vcpkgTriplet: ${{ steps.runvcpkg.outputs.RUNVCPKG_VCPKG_TRIPLET_OUT }}
  #         buildDirectory: "${{runner.workspace}}/build"

  #     - name: Install Clang for running compiler
  #       uses: crazy-max/ghaction-chocolatey@v1
  #       with:
  #         args: install wixtoolset llvm

  #     - name: Test
  #       working-directory: ${{runner.workspace}}/build
  #       # Execute tests defined by the CMake configuration.
  #       # See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
  #       run: ctest -C ${{ env.BUILD_TYPE }} -V

  #     - name: Create Installer
  #       working-directory: ${{runner.workspace}}/build
  #       run: cpack -C ${{ env.BUILD_TYPE }}

  #
  # build-macos:
  #   runs-on: macos-latest

  #   steps:
  #     - uses: actions/checkout@v1

  #     - name: Install Dependencies
  #       run: brew install llvm clamav

  #     - name: Install pytest for easier to read test results
  #       run: python3 -m pip install pytest

  #     - uses: lukka/get-cmake@latest

  #     - name: Create Build Directory
  #       shell: bash
  #       # Some projects don't allow in-source building, so create a separate build directory
  #       # We'll use this as our working directory for all subsequent commands
  #       run: cmake -E make_directory ${{runner.workspace}}/build

  #     - name: Configure CMake
  #       # Use a bash shell so we can use the same syntax for environment variable
  #       # access regardless of the host operating system
  #       working-directory: ${{runner.workspace}}/build
  #       # Note the current convention is to use the -S and -B options here to specify source
  #       # and build directories, but this is only available with CMake 3.13 and higher.
  #       # The CMake binaries on the Github Actions machines are (as of this writing) 3.12
  #       run:
  #         cmake ${{runner.workspace}}/clamav-bytecode-compiler -DCMAKE_BUILD_TYPE=${{ env.BUILD_TYPE }}
  #         -DENABLE_EXAMPLES=ON

  #     - name: Build
  #       shell: bash
  #       working-directory: ${{runner.workspace}}/build
  #       # Execute the build.  You can specify a specific target with "--target <NAME>"
  #       run: cmake --build . --config ${{ env.BUILD_TYPE }}

  #     - name: Test
  #       shell: bash
  #       working-directory: ${{runner.workspace}}/build
  #       # Execute tests defined by the CMake configuration.
  #       # See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
  #       run: ctest -C ${{ env.BUILD_TYPE }} -V

  build-ubuntu:
    runs-on: ubuntu-22.04

    steps:
      - uses: actions/checkout@v1

      - name: Update package listings
        run:
          sudo apt-get update

      - name: Install Dependencies
        run: |
          wget https://apt.llvm.org/llvm.sh
          chmod +x llvm.sh
          sudo ./llvm.sh 16
          sudo apt-get install -y clamav

      - name: Install pytest for easier to read test results
        run: python3 -m pip install pytest

      - uses: lukka/get-cmake@latest

      - name: Create Build Directory
        shell: bash
        # Some projects don't allow in-source building, so create a separate build directory
        # We'll use this as our working directory for all subsequent commands
        run: cmake -E make_directory ${{runner.workspace}}/build

      - name: Configure CMake
        # Use a bash shell so we can use the same syntax for environment variable
        # access regardless of the host operating system
        working-directory: ${{runner.workspace}}/build
        # Note the current convention is to use the -S and -B options here to specify source
        # and build directories, but this is only available with CMake 3.13 and higher.
        # The CMake binaries on the Github Actions machines are (as of this writing) 3.12
        run:
          cmake ${{runner.workspace}}/clamav-bytecode-compiler -D CMAKE_BUILD_TYPE=${{ env.BUILD_TYPE }} -D ENABLE_EXAMPLES=ON

      - name: Build
        shell: bash
        working-directory: ${{runner.workspace}}/build
        # Execute the build.  You can specify a specific target with "--target <NAME>"
        run: cmake --build . --config ${{ env.BUILD_TYPE }}

      - name: Test
        shell: bash
        working-directory: ${{runner.workspace}}/build
        # Execute tests defined by the CMake configuration.
        # See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
        run: ctest -C ${{ env.BUILD_TYPE }} -V