diff --git a/HA-MQTT.md b/HA-MQTT.md
index 91613689..beef9149 100644
--- a/HA-MQTT.md
+++ b/HA-MQTT.md
@@ -117,9 +117,10 @@ icon: 'mdi:map-marker'
 * **MQTT Auto-Discovery for Polling Status Sensors for HA Added Starting at v1.16.0**
   * Polling Status Message, Timestamp and True/False Sensor from last command run are published to MQTT auto-discovery topics and are grouped in a MQTT device grouping for all command status sensors for the same vehicle.
   * Set 'MQTT_LIST_ALL_SENSORS_TOGETHER="true"' to group all the sensors under one MQTT device starting at v1.17.0.
-      * Default is "false".
+    * Default is "false".
   
-#### To add manually if wanted:
+#### To add manually if wanted
+
 Create a MQTT binary sensor in Home Assistant
 
 ```yaml
@@ -144,9 +145,10 @@ mqtt:
 * **MQTT Auto-Discovery for Polling Status Sensors for HA Added Starting at v1.16.0**
   * Polling Status Message, Timestamp and True/False Sensor from last command run are published to MQTT auto-discovery topics and are grouped in a MQTT device grouping for all command status sensors for the same vehicle.
   * Set 'MQTT_LIST_ALL_SENSORS_TOGETHER="true"' to group all the sensors under one MQTT device starting at v1.17.0.
-      * Default is "false".
+    * Default is "false".
+
+#### To add manually if wanted
 
-#### To add manually if wanted:
 Create a MQTT sensor in Home Assistant
 
 ```yaml
@@ -176,9 +178,10 @@ mqtt:
     ```
 
   * Set 'MQTT_LIST_ALL_SENSORS_TOGETHER="true"' to group all the sensors under one MQTT device starting at v1.17.0.
-      * Default is "false".
+    * Default is "false".
+
+#### To add manually if wanted
 
-#### To add manually if wanted:
 Create a MQTT sensor in Home Assistant for each command status you want to monitor. Below is an example for the getLocation command and other commands follow a similar format.
 
 ```yaml
@@ -200,9 +203,10 @@ mqtt:
   * Command Status and Timestamp from last command run are published to MQTT auto-discovery topics and are grouped in a MQTT device grouping for all command status sensors for the same vehicle.
   * Command needs to be run at least once before the sensor is visible in HA.
   * Set 'MQTT_LIST_ALL_SENSORS_TOGETHER="true"' to group all the sensors under one MQTT device starting at v1.17.0.
-      * Default is "false".
+    * Default is "false".
+
+#### To add manually if wanted
 
-#### To add manually if wanted:
 Create a MQTT sensor in Home Assistant for each command timestamp you want to monitor. Below is an example for the getLocation command and other commands follow a similar format.
 
 ```yaml