diff --git a/docs/assets/plt-boot-mode-pic-2.jpg b/docs/assets/plt-boot-mode-pic-2.jpg
new file mode 100644
index 000000000..40b44b913
Binary files /dev/null and b/docs/assets/plt-boot-mode-pic-2.jpg differ
diff --git a/docs/assets/plt-boot-mode-pic-4.jpg b/docs/assets/plt-boot-mode-pic-4.jpg
new file mode 100644
index 000000000..1d61598aa
Binary files /dev/null and b/docs/assets/plt-boot-mode-pic-4.jpg differ
diff --git a/docs/assets/plt-boot-mode-pic-6-1.jpg b/docs/assets/plt-boot-mode-pic-6-1.jpg
new file mode 100644
index 000000000..83e59501a
Binary files /dev/null and b/docs/assets/plt-boot-mode-pic-6-1.jpg differ
diff --git a/docs/assets/plt-boot-mode-pic-6.jpg b/docs/assets/plt-boot-mode-pic-6.jpg
new file mode 100644
index 000000000..83e59501a
Binary files /dev/null and b/docs/assets/plt-boot-mode-pic-6.jpg differ
diff --git a/docs/assets/plt-boot-mode-pic-7.jpg b/docs/assets/plt-boot-mode-pic-7.jpg
new file mode 100644
index 000000000..a006e4743
Binary files /dev/null and b/docs/assets/plt-boot-mode-pic-7.jpg differ
diff --git a/docs/products/plt1b/plt1b-boot-mode.md b/docs/products/plt1b/plt1b-boot-mode.md
index d980caf0a..0c32e5359 100644
--- a/docs/products/plt1b/plt1b-boot-mode.md
+++ b/docs/products/plt1b/plt1b-boot-mode.md
@@ -8,7 +8,9 @@ This will cover how to put the PLT-1B into boot mode. Sometimes, this is needed
 
 1\. See the photo below to help access the boot button through the side of the case on the USB-C side.
 
-![](../../assets/plt-1b-buttons-3.png)
+![](../../assets/plt-boot-mode-pic-2.jpg)
+
+![](../../assets/plt-boot-mode-pic-4.jpg)
 
 2\. Use a pin to press and hold the boot button, while holding the boot button plug the PLT-1B back into your computer/power and then release the boot button
 
@@ -20,6 +22,6 @@ This will cover how to put the PLT-1B into boot mode. Sometimes, this is needed
 
 2\. Press and hold the boot button, while holding it press and release the reset button, then release the boot button
 
-![](../../assets/plt-1b-buttons-4.png)
+![](../../assets/plt-boot-mode-pic-6.jpg)![](../../assets/plt-boot-mode-pic-7.jpg)
 
 3\. Continue with [uploading the firmware](https://wiki.apolloautomation.com/products/plt1/plt1-code/)
\ No newline at end of file