i dont get any readings from the mmwave sensor

[irabeamte2]

Anything i can do about this?

logs_apollo-mtr-1-f586b0_run.txt

Here is a snipset from the log:

[14:07:07][C][scd4x:095]: Address: 0x62
[14:07:07][W][scd4x:099]: Communication failed! Is the sensor connected?
[14:07:07][C][scd4x:112]: Automatic self calibration: OFF
[14:07:07][C][scd4x:115]: Dynamic ambient pressure compensation using sensor 'DPS310 Pressure'
[14:07:07][C][scd4x:127]: Measurement mode: periodic (5s)
[14:07:07][C][scd4x:139]: Temperature offset: 4.00 °C
[14:07:07][C][scd4x:140]: Update Interval: 60.0s
[14:07:07][C][scd4x:141]: CO2 'CO2'
[14:07:07][C][scd4x:141]: Device Class: 'carbon_dioxide'
[14:07:07][C][scd4x:141]: State Class: 'measurement'
[14:07:07][C][scd4x:141]: Unit of Measurement: 'ppm'
[14:07:07][C][scd4x:141]: Accuracy Decimals: 0
[14:07:07][C][scd4x:141]: Icon: 'mdi:molecule-co2'
[14:07:07][C][scd4x:142]: Temperature 'SCD40 Temperature'
[14:07:07][C][scd4x:142]: Device Class: 'temperature'
[14:07:07][C][scd4x:142]: State Class: 'measurement'
[14:07:07][C][scd4x:142]: Unit of Measurement: '°C'
[14:07:07][C][scd4x:142]: Accuracy Decimals: 2
[14:07:07][C][scd4x:142]: Icon: 'mdi:thermometer'
[14:07:07][C][scd4x:143]: Humidity 'SCD40 Humidity'
[14:07:07][C][scd4x:143]: Device Class: 'humidity'
[14:07:07][C][scd4x:143]: State Class: 'measurement'
[14:07:07][C][scd4x:143]: Unit of Measurement: '%'
[14:07:07][C][scd4x:143]: Accuracy Decimals: 2
[14:07:07][C][scd4x:143]: Icon: 'mdi:water-percent'
[14:07:07][E][component:082]: Component scd4x.sensor is marked FAILED

[irabeamte2]

I had readings. Dont know why they stoped working. Is there anything I can do?

[irabeamte2]

[bharvey88]

I would re-seat the LD2450 sensor inside your MTR-1 and if that does not work, try a factory reset radar inside of the HLK app. Please reach out to [email protected] for further help diagnosing issues like this.