diff --git a/i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-android/solving-problems/low-level-settings.md b/i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-android/solving-problems/low-level-settings.md
index d7073d30e..552620c23 100644
--- a/i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-android/solving-problems/low-level-settings.md
+++ b/i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-android/solving-problems/low-level-settings.md
@@ -32,43 +32,43 @@ Toto nastavení je ve výchozím nastavení povoleno.
 
 ### Zachytávání paketů (PCAP)
 
-If this setting is enabled, AdGuard VPN will create a `.pcap` file with a timestamp for its name (for instance, `1682599851461.pcap`) in the app cache directory. This file lists all network packets transferred through the VPN and can be analyzed with the [Wireshark program](https://www.wireshark.org/).
+Pokud je toto nastavení povoleno, vytvoří AdGuard VPN v adresáři mezipaměti aplikace soubor `.pcap` s časovým razítkem (např. `1682599851461.pcap`). Tento soubor obsahuje seznam všech síťových paketů přenesených skrze VPN a lze jej analyzovat pomocí programu [Wireshark](https://www.wireshark.org/).
 
-### Watchdog
+### Hlídací pes
 
-Watchdog monitors the VPN process state to check if there are any problems with it. When enabled, AdGuard VPN will protect itself against aggressive battery saver apps that could otherwise kill it.
+Hlídací pes sleduje stav procesu VPN a kontroluje, zda s ním nejsou nějaké problémy. Když je povolen, AdGuard VPN se bude chránit před agresivními aplikacemi pro spořič baterie, které by ji jinak mohly ukončit.
 
-### Preferred IP version
+### Preferovaná verze IP
 
-Here you can set up the endpoint addresses. There are three options: IPv4, IPv6 or IPv4 and IPv6 (if your device supports both).
+Zde můžete nastavit adresy koncových bodů. Existují tři možnosti: IPv4, IPv6 nebo IPv4 a IPv6 (pokud vaše zařízení podporuje oba protokoly).
 
-### IPv4 ranges excluded from VPN
+### Rozsahy IPv4 vyloučené z VPN
 
-VPN tunneling for the IPv4 ranges listed in this section will be disabled.
+VPN tunel pro rozsahy IPv4 uvedené v této části bude zakázán.
 
-### IPv6 interface
+### Rozhraní IPv6
 
-After enabling this option you will have an IPv6 address while routing traffic through the VPN connection. You can set up the exclusions in the _IPv6 ranges excluded from VPN_.
+Po povolení této možnosti budete mít při směrování provozu přes připojení VPN k dispozici adresu IPv6. Výjimky můžete nastavit v části _Rozsahy IPv6 vyloučené z VPN_.
 
-### IPv6 ranges excluded from VPN
+### Rozsahy IPv6 vyloučené z VPN
 
-VPN tunneling for the IPv6 ranges listed in this section will be disabled.
+VPN tunel pro rozsahy IPv6 uvedené v této části bude zakázán.
 
 :::note
 
-You need to enable _IPv6 interface_ setting in _Low-level settings_ first, otherwise this setting will not be applied.
+Nejprve je třeba povolit nastavení _rozhraní IPv6_ v části _Nízkoúrovňová nastavení_, jinak se toto nastavení nepoužije.
 
 :::
 
-### MTU (maximum transmission unit)
+### MTU (maximální přenosová jednotka)
 
-Here you can set the maximum size (in bytes) of the data packet used in local VPN. The recommended range is 1500-9000 bytes.
+Zde můžete nastavit maximální velikost (v bajtech) datového paketu používaného v lokální VPN. Doporučený rozsah je 1500 –9000 bajtů.
 
-### Excluded apps
+### Vyloučené aplikace
 
-You can list here UIDs (unique identifiers) or package names of the apps that you want to exclude from VPN routing.
-Unlike with apps added to regular _Exclusions_, the traffic of apps added to _Excluded apps_ doesn’t go to the local VPN service on your device at all. Instead, it goes directly to the destination.
+Zde můžete uvést UID (jedinečné identifikátory) nebo názvy balíčků aplikací, které chcete vyloučit ze směrování VPN.
+Na rozdíl od aplikací přidaných do běžných _Výjimek_ se provoz aplikací přidaných do _Vyloučených aplikací_ vůbec nepřenáší do služby lokální VPN ve vašem zařízení. Místo toho směruje přímo do cíle.
 
-### Proxy server port
+### Port proxy serveru
 
-Here you can set up the internal SOCKS5 proxy server port. The default option is 1080.
+Zde můžete nastavit interní port proxy serveru SOCKS5. Výchozí možnost je 1080.
diff --git a/i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index 689e88964..028b43eb3 100644
--- a/i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## Požadavky na systém
 
-AdGuard VPN lze nainstalovat pouze na zařízení s **iOS 14.2 a iPadOS 14.2 nebo novějším**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### Pokud byla AdGuard VPN odstraněna z obchodu App Store
 
diff --git a/i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/adguard-vpn-for-linux.md b/i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/adguard-vpn-for-linux.md
index 1e0984359..689513bce 100644
--- a/i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/adguard-vpn-for-linux.md
+++ b/i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/adguard-vpn-for-linux.md
@@ -9,7 +9,7 @@ Níže jsou uvedeny příkazy, které můžete potřebovat k přihlášení, př
 
 - [Instalace a odinstalace](/adguard-vpn-for-linux/installation)
 - [Přihlášení, připojení a aktualizace](/adguard-vpn-for-linux/login)
-- [Setting up on a router](/adguard-vpn-for-linux/setting-up-on-a-router)
+- [Nastavení routeru](/adguard-vpn-for-linux/setting-up-on-a-router)
 - [Nastavení](/adguard-vpn-for-linux/settings)
 - [Odeslání zpětné vazby](/adguard-vpn-for-linux/feedback)
 
diff --git a/i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..f1e1061cc 100644
--- a/i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/cs/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -1,47 +1,47 @@
 ---
-title: How to set up AdGuard VPN for Linux on an Asuswrt-Merlin router
+title: Jak nastavit AdGuard VPN pro Linux na routeru Asuswrt-Merlin
 sidebar_position: 4
 ---
 
-:::info System requirements
+:::info Požadavky na systém
 
-1. AdGuard VPN CLI requires at least 22 MB of free storage space on your router’s disk or external USB after installing necessary packages.
-2. **Asuswrt-Merlin firmware**: Make sure your router is running the Asuswrt-Merlin firmware.
-3. **USB drive**: A USB drive formatted in a native Linux file system (ext2, ext3, or ext4). We will go through the formatting process in this guide.
+1. AdGuard VPN CLI vyžaduje na disku routeru nebo na externím USB nejméně 22 MB volného místa po instalaci nezbytných souborů.
+2. **Firmware Asuswrt-Merlin**: Zkontrolujte, zda je na vašem routeru nainstalován firmware Asuswrt-Merlin.
+3. **USB disk**: USB disk naformátovaný v nativním linuxovém souborovém systému (ext2, ext3 nebo ext4). V této příručce projdeme proces formátování.
 
 :::
 
-## 1. Determine your router’s IP address
+## 1. Zjistěte IP adresu vašeho routeru
 
-The default IP address for most routers is `192.168.1.1` or `192.168.0.1`. If you’ve changed the IP address or if you’re unsure, you can find it by checking the IP configuration on a connected device.
+Výchozí IP adresa pro většinu routerů je `192.168.1.1` nebo `192.168.0.1`. Pokud jste IP adresu změnili nebo si nejste jisti, můžete ji zjistit kontrolou konfigurace IP v připojeném zařízení.
 
-### On Windows
+### Ve Windows
 
-1. Open Command Prompt:
+1. Otevřete příkazový řádek:
 
    ```bash
    ipconfig
    ```
 
-2. Look for the _Default Gateway_ under your active network connection. This is your router’s IP address.
+2. Pod aktivním síťovým připojením vyhledejte položku _Výchozí brána_. Jedná se o IP adresu vašeho routeru.
 
-### On Mac/Linux
+### V macOS/Linux
 
-1. Open Terminal and run this command for Linux:
+1. Otevřete Terminal a spusťte tento příkaz pro Linux:
 
    ```bash
    ip route | grep default
    ```
 
-   Or this one for Mac:
+   Nebo tento pro macOS:
 
    ```bash
    route -n get default
    ```
 
-2. Look for the _default_ entry. The IP address next to it is your router’s IP address.
+2. Vyhledejte položku _výchozí_. IP adresa vedle ní je IP adresa vašeho routeru.
 
-## 2) Make sure SSH and JFFS custom scripts are enabled on the router
+## 2) Ujistěte se zda jsou na routeru povoleny vlastní skripty SSH a JFFS
 
 First, make sure that SSH access is enabled on your router. This setting is usually found in the router’s web interface. JFFS custom scripts will be used to set routing rules.
 
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/da/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/da/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index 774f9b83a..d1b60b338 100644
--- a/i18n/da/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/da/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## Systemkrav
 
-AdGuard VPN kan kun installeres på enheder med minimum **iOS 14.2 og iPadOS 14.2**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### Hvis AdGuard VPN er fjernet fra App Store
 
diff --git a/i18n/da/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/da/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index 8cefa19b6..ae1a4a089 100644
--- a/i18n/da/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/da/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ Dette trin opsætter firewall-regler på en Asuswrt-Merlin router til rutning af
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/de/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/de/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index 3cdf61bdc..fc98062ff 100644
--- a/i18n/de/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/de/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## Systemanforderungen
 
-AdGuard VPN kann nur auf Geräten mit **iOS 14.2 und iPadOS 14.2 oder höher** installiert werden.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### Falls AdGuard VPN aus dem App Store entfernt wurde
 
diff --git a/i18n/de/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/adguard-vpn-for-linux.md b/i18n/de/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/adguard-vpn-for-linux.md
index 735f2be21..0881f1095 100644
--- a/i18n/de/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/adguard-vpn-for-linux.md
+++ b/i18n/de/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/adguard-vpn-for-linux.md
@@ -9,7 +9,7 @@ Im Folgenden finden Sie die Befehle, die Sie benötigen, um sich anzumelden, ein
 
 - [Installation und Entfernung](/adguard-vpn-for-linux/installation)
 - [Anmeldung, Verbindung und Aktualisierung](/adguard-vpn-for-linux/login)
-- [Setting up on a router](/adguard-vpn-for-linux/setting-up-on-a-router)
+- [Einrichten auf einem Router](/adguard-vpn-for-linux/setting-up-on-a-router)
 - [Einstellungen](/adguard-vpn-for-linux/settings)
 - [Senden von Feedback](/adguard-vpn-for-linux/feedback)
 
diff --git a/i18n/de/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/de/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index 2ced3c73d..90986c84c 100644
--- a/i18n/de/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/de/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ In diesem Schritt werden Firewall-Regeln auf einem Asuswrt-Merlin-Router konfigu
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/de/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/keenetic.md b/i18n/de/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/keenetic.md
index 9ce4e8eb4..1b1b8d56f 100644
--- a/i18n/de/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/keenetic.md
+++ b/i18n/de/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/keenetic.md
@@ -204,33 +204,33 @@ ln -s /opt/adguardvpn_cli/adguardvpn-cli /opt/bin
 
    AdGuard VPN wählt den Standort mit dem niedrigsten Ping aus und speichert ihn für zukünftige Schnellverbindungen.
 
-3. Adjust your settings
+3. Passen Sie Ihre Einstellungen an
 
-   Get a list of all available AdGuard VPN commands and customize the VPN client to your needs.
+   Rufen Sie eine Liste aller verfügbaren AdGuard VPN-Befehle auf und passen Sie den VPN-Client an Ihre Bedürfnisse an.
 
-   To view all commands, type:
+   Um alle Befehle anzuzeigen, geben Sie ein:
 
    ```bash
    adguardvpn-cli --help-all
    ```
 
-4. Enter `yes` when asked “Would you like to set default routes in TUN mode?”
+4. Geben Sie `yes` ein, wenn Sie gefragt werden: „Möchten Sie Standardrouten im TUN-Modus festlegen?“
 
-AdGuard VPN CLI will create a tun0 interface for VPN tunneling
+AdGuard VPN CLI erstellt eine tun0-Schnittstelle für VPN-Tunneling
 
-## 7. Set up firewall rules
+## 7. Firewall-Regeln einrichten
 
-This step is designed to configure firewall rules on a Keenetic router to route traffic through AdGuard VPN.
+Dieser Schritt dient dazu, Firewall-Regeln auf einem Keenetic-Router zu konfigurieren, um den Datenverkehr durch AdGuard VPN führen zu können.
 
-1. **Install `iptables` by running this command via SSH:**
+1. **Installieren Sie `iptables`, indem Sie diesen Befehl über SSH ausführen:**
 
    ```bash
    opkg install iptables
    ```
 
-   This line installs the `iptables` package, which is a tool for managing network packet filtering rules on Linux systems.
+   Dieser Befehl installiert das `iptables`-Paket, ein Werkzeug zur Verwaltung von Netzwerk-Paketfilterregeln auf Linux-Systemen.
 
-2. **Create a new shell script by running the following command:**
+2. **Erstellen Sie ein neues Shell-Skript, indem Sie den folgenden Befehl ausführen:**
 
    ```bash
 
@@ -247,23 +247,23 @@ This step is designed to configure firewall rules on a Keenetic router to route
    EOF
    ```
 
-   And make it executable:
+   Und machen Sie es ausführbar:
 
    ```bash
    chmod +x /opt/etc/ndm/netfilter.d/001-adguardvpn.sh
    ```
 
-   If you have more brX interfaces, make sure to include them in the script as well to route their traffic. Alternatively, make sure to specify a different routing rule for those interfaces.
+   Wenn Sie über weitere brX-Schnittstellen verfügen, sollten Sie diese ebenfalls in das Skript einbeziehen, um deren Datenverkehr umzuleiten. Alternativ können Sie auch eine andere Routing-Regel für diese Schnittstellen angeben.
 
-This will create a new shell script named `001-adguardvpn.sh` in the `/opt/etc/ndm/netfilter.d/` directory, which is where network-related scripts are typically stored on a Keenetic router.
+Dadurch wird ein neues Shell-Skript mit dem Namen `001-adguardvpn.sh` im Ordner `/opt/etc/ndm/netfilter.d/` erstellt, in dem netzwerkbezogene Skripte normalerweise auf einem Keenetic-Router gespeichert werden.
 
-The script creates a custom firewall rule to ensure that traffic from your LAN (`br0`) is routed through the AdGuard VPN interface (`tun0`). It first cleans up any previous rules related to this configuration, then sets up new rules to direct the traffic appropriately.
+Das Skript erstellt eine benutzerdefinierte Firewall-Regel, um sicherzustellen, dass der Datenverkehr aus Ihrem LAN (`br0`) über die AdGuard VPN-Schnittstelle (`tun0`) geleitet wird. Er bereinigt zunächst alle früheren Regeln, die sich auf diese Konfiguration beziehen, und erstellt anschließend neue Regeln, um den Datenverkehr entsprechend zu leiten.
 
-## 8. Set up automatic launch for AdGuard VPN CLI
+## 8. Automatischen Start für AdGuard VPN CLI einrichten
 
-The following script is designed to automatically establish a VPN connection using AdGuard VPN on your Keenetic router when the WAN interface becomes available (e.g., after a reboot or reconnecting to the Internet).
+Das folgende Skript baut automatisch eine VPN-Verbindung mit AdGuard VPN auf Ihrem Keenetic-Router auf, sobald die WAN-Schnittstelle verfügbar ist (z.B. nach einem Neustart oder einer erneuten Verbindung zum Internet).
 
-Run the following command:
+Führen Sie den folgenden Befehl aus:
 
 ```bash
 cat << E0F > /opt/etc/ndm/wan.d/001-adguardvpn.sh
@@ -275,16 +275,16 @@ exit 0
 E0F
 ```
 
-And make it executable:
+Und machen Sie es ausführbar:
 
 ```bash
 chmod +x /opt/etc/ndm/wan.d/001-adguardvpn.sh
 ```
 
-The script named `001-adguardvpn.sh` will be saved to `/opt/etc/ndm/wan.d/`.
+Das Skript namens `001-adguardvpn.sh` wird in `/opt/etc/ndm/wan.d/` gespeichert.
 
-It will start AdGuard VPN when Internet is connected.
+AdGuard VPN wird gestartet, sobald eine Internetverbindung besteht.
 
-Reboot your router to finish setup.
+Starten Sie Ihren Router neu, um die Einrichtung abzuschließen.
 
-Congrats! Now you have a router secured with AdGuard VPN.
+Das war's! Jetzt haben Sie einen mit AdGuard VPN gesicherten Router.
diff --git a/i18n/es/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/es/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index dd3d091a8..4404b745e 100644
--- a/i18n/es/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/es/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## Requisitos del sistema
 
-AdGuard VPN can only be installed on devices with **iOS 14.2 and iPadOS 14.2 or later**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### If AdGuard VPN has been removed from the App Store
 
diff --git a/i18n/es/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/es/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..92234acba 100644
--- a/i18n/es/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/es/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/fi/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/fi/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index 0cad3c0da..b0464ce56 100644
--- a/i18n/fi/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/fi/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## System requirements
 
-AdGuard VPN can only be installed on devices with **iOS 14.2 and iPadOS 14.2 or later**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### If AdGuard VPN has been removed from the App Store
 
diff --git a/i18n/fi/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/fi/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..92234acba 100644
--- a/i18n/fi/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/fi/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/fr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/fr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index 4adc2af74..56909edeb 100644
--- a/i18n/fr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/fr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## Configuration requise
 
-AdGuard VPN can only be installed on devices with **iOS 14.2 and iPadOS 14.2 or later**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### If AdGuard VPN has been removed from the App Store
 
diff --git a/i18n/fr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/fr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..92234acba 100644
--- a/i18n/fr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/fr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/hr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/hr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index 0cad3c0da..b0464ce56 100644
--- a/i18n/hr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/hr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## System requirements
 
-AdGuard VPN can only be installed on devices with **iOS 14.2 and iPadOS 14.2 or later**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### If AdGuard VPN has been removed from the App Store
 
diff --git a/i18n/hr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/hr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..92234acba 100644
--- a/i18n/hr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/hr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/it/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/it/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index 36710e852..01b89bc40 100644
--- a/i18n/it/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/it/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## Requisiti di sistema
 
-AdGuard VPN can only be installed on devices with **iOS 14.2 and iPadOS 14.2 or later**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### If AdGuard VPN has been removed from the App Store
 
diff --git a/i18n/it/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/it/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..92234acba 100644
--- a/i18n/it/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/it/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/ja/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/ja/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index a6bc48b36..203604c18 100644
--- a/i18n/ja/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/ja/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## 動作環境
 
-AdGuard VPN can only be installed on devices with **iOS 14.2 and iPadOS 14.2 or later**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### If AdGuard VPN has been removed from the App Store
 
diff --git a/i18n/ja/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/ja/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..92234acba 100644
--- a/i18n/ja/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/ja/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/ko/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/ko/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index 5b11323e0..d4e773c30 100644
--- a/i18n/ko/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/ko/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## 시스템 요구 사항
 
-AdGuard VPN can only be installed on devices with **iOS 14.2 and iPadOS 14.2 or later**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### If AdGuard VPN has been removed from the App Store
 
diff --git a/i18n/ko/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/ko/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..92234acba 100644
--- a/i18n/ko/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/ko/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/nl/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/nl/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index 0cad3c0da..b0464ce56 100644
--- a/i18n/nl/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/nl/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## System requirements
 
-AdGuard VPN can only be installed on devices with **iOS 14.2 and iPadOS 14.2 or later**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### If AdGuard VPN has been removed from the App Store
 
diff --git a/i18n/nl/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/nl/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..92234acba 100644
--- a/i18n/nl/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/nl/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/pt-BR/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/pt-BR/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index a33b85bec..54daea531 100644
--- a/i18n/pt-BR/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/pt-BR/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## Requisitos do Sistema
 
-O AdGuard VPN só pode ser instalado em dispositivos com **iOS 14.2 e iPadOS 14.2 ou posterior**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### Se o AdGuard VPN foi removido da App Store
 
diff --git a/i18n/pt-BR/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/pt-BR/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..92234acba 100644
--- a/i18n/pt-BR/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/pt-BR/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/pt/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/pt/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index 0cad3c0da..b0464ce56 100644
--- a/i18n/pt/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/pt/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## System requirements
 
-AdGuard VPN can only be installed on devices with **iOS 14.2 and iPadOS 14.2 or later**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### If AdGuard VPN has been removed from the App Store
 
diff --git a/i18n/pt/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/pt/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..92234acba 100644
--- a/i18n/pt/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/pt/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-android/solving-problems/low-level-settings.md b/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-android/solving-problems/low-level-settings.md
index 69501ecb9..44360b8a2 100644
--- a/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-android/solving-problems/low-level-settings.md
+++ b/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-android/solving-problems/low-level-settings.md
@@ -1,74 +1,74 @@
 ---
-title: Low-level settings guide
+title: Гид по Низкоуровневым настройкам
 sidebar_position: 6
 ---
 
-## How to reach Low-level settings
+## Как получить доступ к Низкоуровневым настройкам
 
 :::caution
 
-Changing _Low-level settings_ can cause problems with the performance of AdGuard VPN, may break the Internet connection or compromise your security and privacy. You should only open this section if you know what you are doing, or if you were asked to do so by our support team.
+Изменение _Низкоуровневых настроек_ может вызвать проблемы с производительностью AdGuard, нарушить подключение к интернету или поставить под угрозу вашу безопасность и конфиденциальность. Открывайте этот раздел, только если вы знаете, что делаете, или если вас попросила об этом наша команда поддержки.
 
 :::
 
-To access _Low-level settings_, open the AdGuard VPN app and tap the gear icon in the lower right corner of the screen. Then choose _General_ → _Advanced_ → _Low-level settings_.
+Чтобы перейти к Низкоуровневым настройкам, откройте приложение AdGuard VPN и коснитесь значка шестерёнки в правом нижнем углу экрана. Затем выберите _Общие_ → _Дополнительные_ → _Низкоуровневые настройки_.
 
-## Low-level settings
+## Низкоуровневые настройки
 
-Below we list all low-level settings available in AdGuard VPN for Android and explain what they do. We once again urge you not to mess with these settings blindly even if you’ve read this guide. Treat it as a cheat sheet for when you know what you are doing but want to brush up on specifics.
+Ниже мы перечислим все низкоуровневые настройки, доступные в AdGuard VPN для Android, и объясним, что они делают. Мы ещё раз призываем вас не изменять эти настройки вслепую, даже если вы прочитали это руководство. Относитесь к нему как к шпаргалке на случай, если вы знаете, что делаете, но хотите освежить в памяти детали.
 
-### AdGuard VPN protocol
+### Протокол AdGuard VPN
 
-By default, AdGuard VPN protocol uses HTTP/2 transport protocol to avoid detection and to maintain high speed. You can read more about its implementation in a [dedicated article](/general/adguard-vpn-protocol.md).
+По умолчанию протокол AdGuard VPN использует транспортный протокол HTTP/2, чтобы скорость была высокой и чтобы его было сложнее обнаружить. Подробнее о его реализации можно прочитать [в отдельной статье](/general/adguard-vpn-protocol.md).
 
-You can switch AdGuard VPN to use QUIC transport protocol instead. [QUIC](https://adguard-vpn.com/kb/general/why-adguard-vpn/#6-quic-support) is a relatively new protocol, hence it can be less stable. However, if your Internet connection is unstable (for example, when you connect to the public Wi-Fi), it provides better security and increases the connection speed thanks to the [Head-Of-Line Blocking](https://adguard-dns.io/en/blog/dns-over-quic.html#headoflineblocking) technology.
+Вы можете переключить AdGuard VPN на использование транспортного протокола QUIC. [QUIC](https://adguard-vpn.com/kb/general/why-adguard-vpn/#6-quic-support) — относительно новый протокол, поэтому он может быть менее стабильным. Однако, если ваше интернет-соединение нестабильно (например, при подключении к общественному Wi-Fi), он обеспечивает лучшую безопасность и увеличивает скорость соединения благодаря технологии [Head-Of-Line Blocking](https://adguard-dns.io/ru/blog/dns-over-quic.html#headoflineblocking).
 
-### Include Wi-Fi gateway in VPN routes
+### Включить шлюз Wi-Fi в маршруты VPN
 
-If this setting is enabled, the gateway IP addresses will be added to VPN routes when on Wi-Fi.
-If you disable it, then the route configuration (IP ranges that are filtered) will be changed. The Wi-Fi gateway of the network to which the user is connected will be excluded, and therefore, it will not be subject to filtering.
+Если этот параметр включён, IP-адреса шлюзов будут добавляться в VPN-маршруты при работе с Wi-Fi.
+Если его отключить, то конфигурация маршрутов (диапазоны IP-адресов, которые фильтруются) будет изменена. Wi-Fi-шлюз сети, к которой подключён пользователь, будет исключён, и, следовательно, не будет фильтроваться.
 
-This setting is enabled by default.
+Эта настройка включена по умолчанию.
 
-### Packet capture (PCAP)
+### Захват пакетов (PCAP)
 
-If this setting is enabled, AdGuard VPN will create a `.pcap` file with a timestamp for its name (for instance, `1682599851461.pcap`) in the app cache directory. This file lists all network packets transferred through the VPN and can be analyzed with the [Wireshark program](https://www.wireshark.org/).
+Если эта настройка включена, AdGuard VPN создаст файл `.pcap` с временной меткой для своего имени (например, `1682599851461.pcap`) в директории кеша приложения. В этом файле будут перечислены все сетевые пакеты, передаваемые через VPN. Их можно проанализировать с помощью [программы Wireshark](https://www.wireshark.org/).
 
 ### Watchdog
 
-Watchdog monitors the VPN process state to check if there are any problems with it. When enabled, AdGuard VPN will protect itself against aggressive battery saver apps that could otherwise kill it.
+Watchdog отслеживает состояние процесса VPN, чтобы проверить, нет ли в нём проблем. Когда AdGuard VPN включён, он защищает себя от приложений для экономии заряда, которые в противном случае могли бы его убить.
 
-### Preferred IP version
+### Предпочитаемая версия IP
 
-Here you can set up the endpoint addresses. There are three options: IPv4, IPv6 or IPv4 and IPv6 (if your device supports both).
+Здесь вы можете задать IP-адреса. Есть три варианта: IPv4, IPv6 или IPv4 и IPv6 (если ваше устройство поддерживает оба варианта).
 
-### IPv4 ranges excluded from VPN
+### Диапазоны IPv4, исключённые из VPN
 
-VPN tunneling for the IPv4 ranges listed in this section will be disabled.
+VPN-туннелирование для диапазонов IPv4, перечисленных в данном разделе, будет отключено.
 
-### IPv6 interface
+### IPv6-интерфейс
 
-After enabling this option you will have an IPv6 address while routing traffic through the VPN connection. You can set up the exclusions in the _IPv6 ranges excluded from VPN_.
+После включения этой опции у вас будет IPv6-адрес при маршрутизации трафика через VPN-подключение. Вы можете настроить исключения в _Диапазонах IPv6, исключённых из VPN_.
 
-### IPv6 ranges excluded from VPN
+### Диапазоны IPv6, исключённые из VPN
 
-VPN tunneling for the IPv6 ranges listed in this section will be disabled.
+VPN-туннелирование для диапазонов IPv6, перечисленных в данном разделе, будет отключено.
 
 :::note
 
-You need to enable _IPv6 interface_ setting in _Low-level settings_ first, otherwise this setting will not be applied.
+Сначала необходимо включить настройку _Интерфейс IPv6_ в _Низкоуровневых настройках_, иначе она не будет применена.
 
 :::
 
-### MTU (maximum transmission unit)
+### MTU (максимальная единица передачи)
 
-Here you can set the maximum size (in bytes) of the data packet used in local VPN. The recommended range is 1500-9000 bytes.
+Здесь вы можете задать максимальный размер (в байтах) пакета данных, используемого в локальной сети VPN. Рекомендуемый диапазон: 1500–9000 байт.
 
-### Excluded apps
+### Исключённые приложения
 
-You can list here UIDs (unique identifiers) or package names of the apps that you want to exclude from VPN routing.
-Unlike with apps added to regular _Exclusions_, the traffic of apps added to _Excluded apps_ doesn’t go to the local VPN service on your device at all. Instead, it goes directly to the destination.
+Здесь вы можете перечислить UID (уникальные идентификаторы) или имена пакетов приложений, которые вы хотите исключить из VPN-маршрутизации.
+В отличие от приложений, добавленных в обычные _Исключения_, трафик приложений, добавленных в _Исключённые приложения_, вообще не поступает в локальную службу VPN на вашем устройстве. Вместо этого он направляется прямо к месту назначения.
 
-### Proxy server port
+### Порт прокси-сервера
 
-Here you can set up the internal SOCKS5 proxy server port. The default option is 1080.
+Здесь вы можете настроить внутренний порт прокси-сервера SOCKS5. Значение по умолчанию — 1080.
diff --git a/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index c019e6d15..f264507a1 100644
--- a/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## Системные требования
 
-AdGuard VPN может быть установлен на устройствах версии **iOS 14.2 и iPadOS 14.2 и выше**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### Если AdGuard VPN удалён из App Store
 
diff --git a/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/adguard-vpn-for-linux.md b/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/adguard-vpn-for-linux.md
index ec3d49ebe..3ba4ab5bf 100644
--- a/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/adguard-vpn-for-linux.md
+++ b/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/adguard-vpn-for-linux.md
@@ -9,7 +9,7 @@ AdGuard VPN для Linux, также известный как AdGuard VPN CLI,
 
 - [Установка и удаление](/adguard-vpn-for-linux/installation)
 - [Вход, подключение и обновление](/adguard-vpn-for-linux/login)
-- [Setting up on a router](/adguard-vpn-for-linux/setting-up-on-a-router)
+- [Настройка на роутере](/adguard-vpn-for-linux/setting-up-on-a-router)
 - [Настройки](/adguard-vpn-for-linux/settings)
 - [Отправка отзыва](/adguard-vpn-for-linux/feedback)
 
diff --git a/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index 70d659e78..2f5cc6801 100644
--- a/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ modprobe tun
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/keenetic.md b/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/keenetic.md
index 8decc73d0..1d44571e2 100644
--- a/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/keenetic.md
+++ b/i18n/ru/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/keenetic.md
@@ -31,41 +31,41 @@ IP-адрес по умолчанию для большинства роутер
    ipconfig
    ```
 
-2. Look for the _Default Gateway_ under your active network connection. This is your router’s IP address.
+2. Найдите _Шлюз по умолчанию_ в активном сетевом подключении. Это IP-адрес вашего роутера.
 
-### On macOS and Linux
+### На macOS и Linux
 
-1. On Linux, open Terminal and run this command:
+1. В Linux откройте Терминал и выполните эту команду:
 
    ```bash
    ip route | grep default
    ```
 
-   Or this on Mac:
+   Или эту на Mac:
 
    ```text
    route -n get default
    ```
 
-2. Look for the _default_ entry. The IP address next to it is your router’s IP address.
+2. Найдите запись _default_. Рядом с ней находится IP-адрес вашего роутера.
 
-## 3) Use an SSH client to connect to the router
+## 3) Используйте SSH-клиент для подключения к роутеру
 
-You’ll need an SSH client. Most Linux and macOS systems come with an SSH client pre-installed. For Windows, you can use PowerShell, the built-in SSH client in Windows 10/11, or a third-party application like PuTTY.
+Вам понадобится SSH-клиент. Большинство систем на Linux и macOS поставляются с предустановленным SSH-клиентом. Для Windows вы можете использовать PowerShell, встроенный SSH-клиент в Windows 10/11 или стороннее приложение, например PuTTY.
 
-### Built-in SSH client (Linux, macOS, and Windows 10/11)
+### Встроенный SSH-клиент (для Linux, macOS и Windows 10/11)
 
-1. Open Terminal or PowerShell.
+1. Откройте Терминал или PowerShell.
 
-2. Run the SSH command:
+2. Выполните команду SSH:
 
    ```bash
    ssh admin@192.168.1.1
    ```
 
-   Replace `192.168.1.1` with your router’s IP address.
+   Замените `192.168.1.1` на IP-адрес вашего роутера.
 
-3. If this is your first time connecting to the router via SSH, you’ll see a message like this:
+3. Если вы впервые подключаетесь к роутеру через SSH, вы увидите такое сообщение:
 
    ```text
    The authenticity of host '192.168.1.1 (192.168.1.1)' can't be established.
@@ -73,73 +73,73 @@ You’ll need an SSH client. Most Linux and macOS systems come with an SSH clien
    Are you sure you want to continue connecting (yes/no/[fingerprint])?
    ```
 
-   Type `yes` and press Enter.
+   Введите `yes` и нажмите Enter.
 
-4. Enter the router’s password when prompted. The default username is `root` and the default password is `keenetic`.
+4. Введите пароль от роутера, когда появится соответствующий запрос. Имя пользователя по умолчанию — `root`, пароль — `keenetic`.
 
-### PuTTY (Windows 8 and earlier)
+### PuTTY (Windows 8 и более ранние версии)
 
-1. Download and install PuTTY from [the official website](https://www.putty.org/).
+1. Скачайте и установите PuTTY [с официального сайта](https://www.putty.org/).
 
-2. Open PuTTY.
+2. Откройте PuTTY.
 
-3. In the _Host Name (or IP address)_ field, enter your router’s IP address (e.g., `192.168.1.1`)
+3. В поле _Имя хоста (или IP-адрес)_ введите IP вашего роутера (например, `192.168.1.1`)
 
-4. Ensure the _Connection type_ is set to SSH.
+4. Убедитесь, что _Тип подключения_ установлен на SSH.
 
-5. Click _Open_.
+5. Нажмите _Открыть_.
 
-6. When the Terminal window opens, log in. The default username is `root` and the default password is `keenetic`.
+6. Когда откроется окно Терминала, войдите в систему. Имя пользователя по умолчанию — `root`, пароль — `keenetic`.
 
-Once logged in, you can use various commands to interact with your router’s Linux-based operating system.
+После входа в систему вы можете использовать различные команды для взаимодействия с операционной системой роутера на базе Linux.
 
-## 4. Install OPKG Entware
+## 4. Установите OPKG Entware
 
-In Keenetic models equipped with a USB port (except Keenetic 4G), you can use the OPKG package manager. It allows you to install third-party software packages to expand routers capabilities.
+В моделях Keenetic с USB-портом (кроме Keenetic 4G) можно использовать менеджер пакетов OPKG. Он позволяет устанавливать пакеты ПО сторонних производителей для расширения возможностей роутеров.
 
-Starting with version 3.7, for some Keenetic models, it is possible to write OPKG Entware to the [UBIFS](https://en.wikipedia.org/wiki/UBIFS) partition of the router's NAND flash memory, i.e. to the built-in memory of the router. Follow the steps below to install the Entware repository package system on a USB drive or in the router’s internal memory.
+Начиная с версии 3.7, для некоторых моделей Keenetic появилась возможность записывать OPKG Entware в раздел [UBIFS](https://ru.wikipedia.org/wiki/UBIFS) NAND флеш-памяти роутера, то есть во встроенную память роутера. Чтобы установить систему пакетов репозитория Entware на USB-накопитель или во внутреннюю память роутера, выполните следующие действия.
 
-### How to install OPKG Entware on a USB drive
+### Как установить OPKG Entware на USB-накопитель
 
-It is possible to install OPKG packages on the Keenetic models with USB ports that support USB flash drives. These are: KN-1410, KN-1710/1711, KN-1010/1011, KN-2510, KN-2410, KN-1810, KN-1910, KN-2310, KN-2010, KN-2110, KN-2610, KN-2710.
+На модели Keenetic с портами USB, поддерживающими USB Flash-накопители, можно установить пакеты OPKG. К ним относятся: KN-1410, KN-1710/1711, KN-1010/1011, KN-2510, KN-2410, KN-1810, KN-1910, KN-2310, KN-2010, KN-2110, KN-2610, KN-2710.
 
-For detailed instructions, visit [the official Keenetic Wiki](https://help.keenetic.com/hc/en-us/articles/360021214160-Installing-the-Entware-repository-package-system-on-a-USB-drive).
+Подробные инструкции смотрите [на официальной странице Keenetic](https://help.keenetic.com/hc/ru/articles/360021214160-Установка-системы-пакетов-репозитория-Entware-на-USB-накопитель).
 
-### How to install OPKG Entware in the router’s internal memory
+### Как установить OPKG Entware во внутреннюю память роутера
 
-This method will work with the following models: KN-1010/1011, KN-1810/1811, KN-1910, KN-2010, KN-2110, KN-2310, KN-2410, KN-2510, KN-2610, KN-2710, KN-3810, KN-3610 with the KeeneticOS version 3.7 and later.
+Этот метод подходит для следующих моделей: KN-1010/1011, KN-1810/1811, KN-1910, KN-2010, KN-2110, KN-2310, KN-2410, KN-2510, KN-2610, KN-2710, KN-3810, KN-3610 с версией KeeneticOS 3.7 и выше.
 
-For detailed instructions, visit [the official Keenetic Wiki](https://help.keenetic.com/hc/en-us/articles/360021888880-Installing-OPKG-Entware-in-the-router-s-internal-memory).
+Подробные инструкции смотрите [на официальной странице Keenetic](https://help.keenetic.com/hc/ru/articles/360021888880-Установка-OPKG-Entware-на-встроенную-память-роутера).
 
-If your router doesn’t support installing packages on its internal memory, follow the instructions for installing packages on a USB drive.
+Если ваш роутер не поддерживает установку пакетов на внутреннюю память, следуйте инструкции по установке пакетов на USB-накопитель.
 
-## 5. Install AdGuard VPN CLI
+## 5. Установите AdGuard VPN
 
-In your SSH client, execute the following code to install the packages required for AdGuard VPN CLI:
+В SSH-клиенте выполните следующий код, чтобы установить пакеты, необходимые для AdGuard VPN CLI:
 
 ```bash
 opkg install curl sudo ca-certificates
 ```
 
-Go to the `/opt` folder by typing `/cd opt` and run the AdGuard VPN CLI installation script:
+Перейдите в папку `/opt`, набрав `/cd opt`, и запустите скрипт установки AdGuard VPN CLI:
 
 ```bash
 curl -fsSL https://raw.githubusercontent.com/AdguardTeam/AdGuardVPNCLI/master/scripts/release/install.sh | sh -s -- -v
 ```
 
-When asked “Would you like to link the binary to /usr/local/bin?“, reply `n` and run this line:
+На вопрос Would you like to link the binary to /usr/local/bin? ответьте `n` и выполните следующую строку:
 
 ```bash
 ln -s /opt/adguardvpn_cli/adguardvpn-cli /opt/bin
 ```
 
-## 6. Set up AdGuard VPN CLI
+## 6. Настройте AdGuard VPN CLI
 
-1. Log in to your account
+1. Войдите в аккаунт
 
-   To use AdGuard VPN for Linux, you need an AdGuard account. You can sign up or log in on our [website](https://auth.adguard.com/login.html) or in Terminal.
+   Чтобы использовать AdGuard VPN для Linux, вам понадобится аккаунт AdGuard. Вы можете зарегистрироваться или войти [на нашем сайте](https://auth.adguard.com/login.html) или в Терминале.
 
-   Before logging in, go to Terminal and make sure you are in the right shell interface. If you can see the following text:
+   Перед этим зайдите в Терминал и убедитесь, что вы находитесь в нужном интерфейсе оболочки. Если вы видите следующий текст:
 
    ```text
    KeeneticOS version 4.01.C.7.0-1, copyright (c) 2010-2024 Keenetic Ltd.
@@ -147,13 +147,13 @@ ln -s /opt/adguardvpn_cli/adguardvpn-cli /opt/bin
    THIS SOFTWARE IS A SUBJECT OF KEENETIC LIMITED END-USER LICENCE AGREEMENT. BY USING IT YOU AGREE ON TERMS AND CONDITIONS HEREOF. FOR MORE INFORMATION PLEASE CHECK https://keenetic.com/legal
    ```
 
-   Run this command to exit into the shell needed for the next steps:
+   Выполните эту команду, чтобы выйти в оболочку, необходимую для следующих шагов:
 
    ```bash
    exec sh
    ```
 
-   If you see the following text, you can continue the setup:
+   Если вы видите следующий текст, вы можете продолжить настройку:
 
    ```bash
    BusyBox v1.36.1 (2024-08-08 16:11:23 UTC) built-in shell (ash)
@@ -161,76 +161,76 @@ ln -s /opt/adguardvpn_cli/adguardvpn-cli /opt/bin
    / #
    ```
 
-   To sign up or log in, type:
+   Чтобы зарегистрироваться или войти, введите:
 
    ```bash
    adguardvpn-cli login
    ```
 
-2. Connect to VPN
+2. Подключитесь к VPN
 
-   For Keenetic routers, be sure to import the SSL certificate and select a folder for the user directory by running this command before connecting:
+   Для роутеров Keenetic обязательно импортируйте SSL-сертификат и выберите папку для пользовательского каталога, выполнив следующую команду перед подключением:
 
    ```bash
    export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
    export HOME=/opt/home/admin
    ```
 
-   This must be done before each session.
+   Это необходимо делать перед каждым сеансом.
 
-   Select a VPN server location that best suits your needs.
+   Выберите локацию VPN-сервера, которая лучше всего соответствует вашим потребностям.
 
-   In general, the closer the server is to you, the faster the connection.
+   Как правило, чем ближе к вам сервер, тем быстрее соединение.
 
-   To view available locations, type:
+   Чтобы посмотреть доступные локации, введите:
 
    ```bash
    adguardvpn-cli list-locations
    ```
 
-   To connect to a specific location, type:
+   Чтобы подключиться к определённой локации, введите:
 
    ```bash
    adguardvpn-cli connect -l LOCATION_NAME
    ```
 
-   Replace `LOCATION_NAME` with the city, country, or ISO code of the location you want to connect to.
+   Замените `LOCATION_NAME` на город, страну или ISO-код локации на английском, к которой хотите подключиться.
 
-   For quick connect, type:
+   Для быстрого подключения введите:
 
    ```bash
    adguardvpn-cli connect
    ```
 
-   AdGuard VPN will choose the location with the lowest ping and remember it for future quick connections.
+   AdGuard VPN выберет самую локацию с наименьшим пингом и запомнит её для будущих быстрых подключений.
 
-3. Adjust your settings
+3. Настройте VPN
 
-   Get a list of all available AdGuard VPN commands and customize the VPN client to your needs.
+   Получите список всех доступных команд AdGuard VPN и настройте VPN-клиент под свои нужды.
 
-   To view all commands, type:
+   Чтобы просмотреть все команды, введите:
 
    ```bash
    adguardvpn-cli --help-all
    ```
 
-4. Enter `yes` when asked “Would you like to set default routes in TUN mode?”
+4. Введите `yes` на вопрос Would you like to set default routes in TUN mode?
 
-AdGuard VPN CLI will create a tun0 interface for VPN tunneling
+AdGuard VPN CLI создаст интерфейс tun0 для VPN-туннелирования
 
-## 7. Set up firewall rules
+## 7. Настройте правила фаервола
 
-This step is designed to configure firewall rules on a Keenetic router to route traffic through AdGuard VPN.
+Этот шаг предназначен для настройки правил фаервола на роутере Keenetic для маршрутизации трафика через AdGuard VPN.
 
-1. **Install `iptables` by running this command via SSH:**
+1. **Установите `iptables`, выполнив эту команду через SSH:**
 
    ```bash
    opkg install iptables
    ```
 
-   This line installs the `iptables` package, which is a tool for managing network packet filtering rules on Linux systems.
+   Эта строка устанавливает пакет `iptables` — инструмент для управления правилами фильтрации сетевых пакетов в системах Linux.
 
-2. **Create a new shell script by running the following command:**
+2. **Создайте новый скрипт оболочки, выполнив следующую команду:**
 
    ```bash
 
@@ -247,23 +247,23 @@ This step is designed to configure firewall rules on a Keenetic router to route
    EOF
    ```
 
-   And make it executable:
+   И сделайте его исполняемым:
 
    ```bash
    chmod +x /opt/etc/ndm/netfilter.d/001-adguardvpn.sh
    ```
 
-   If you have more brX interfaces, make sure to include them in the script as well to route their traffic. Alternatively, make sure to specify a different routing rule for those interfaces.
+   Если у вас больше интерфейсов brX, обязательно включите их в скрипт для маршрутизации их трафика. Или укажите другое правило маршрутизации для этих интерфейсов.
 
-This will create a new shell script named `001-adguardvpn.sh` in the `/opt/etc/ndm/netfilter.d/` directory, which is where network-related scripts are typically stored on a Keenetic router.
+Это создаст новый скрипт оболочки с именем `001-adguardvpn.sh` в каталоге `/opt/etc/ndm/netfilter.d/`, где на роутере Keenetic обычно хранятся скрипты, связанные с сетью.
 
-The script creates a custom firewall rule to ensure that traffic from your LAN (`br0`) is routed through the AdGuard VPN interface (`tun0`). It first cleans up any previous rules related to this configuration, then sets up new rules to direct the traffic appropriately.
+Скрипт создаёт пользовательское правило фаервола, чтобы гарантировать, что трафик из вашей локальной сети (`br0`) будет направляться через интерфейс AdGuard VPN (`tun0`). Сначала он очищает все предыдущие правила, связанные с этой конфигурацией, а затем настраивает новые правила для правильной маршрутизации трафика.
 
-## 8. Set up automatic launch for AdGuard VPN CLI
+## 8. Настройте автоматический запуск AdGuard VPN CLI
 
-The following script is designed to automatically establish a VPN connection using AdGuard VPN on your Keenetic router when the WAN interface becomes available (e.g., after a reboot or reconnecting to the Internet).
+Следующий скрипт предназначен для автоматического создания VPN-соединения с помощью AdGuard VPN на роутере Keenetic, когда WAN-интерфейс становится доступным (например, после перезагрузки или повторного подключения к интернету).
 
-Run the following command:
+Выполните следующую команду:
 
 ```bash
 cat << E0F > /opt/etc/ndm/wan.d/001-adguardvpn.sh
@@ -275,16 +275,16 @@ exit 0
 E0F
 ```
 
-And make it executable:
+И сделайте её исполняемой:
 
 ```bash
 chmod +x /opt/etc/ndm/wan.d/001-adguardvpn.sh
 ```
 
-The script named `001-adguardvpn.sh` will be saved to `/opt/etc/ndm/wan.d/`.
+Скрипт с именем `001-adguardvpn.sh` будет сохранён в `/opt/etc/ndm/wan.d/`.
 
-It will start AdGuard VPN when Internet is connected.
+Он запустит AdGuard VPN при подключении к интернету.
 
-Reboot your router to finish setup.
+Перезагрузите роутер, чтобы завершить настройку.
 
-Congrats! Now you have a router secured with AdGuard VPN.
+Готово! Теперь у вас есть роутер, защищённый с помощью AdGuard VPN.
diff --git a/i18n/ru/docusaurus-plugin-content-docs/current/general/how-vpn-works.md b/i18n/ru/docusaurus-plugin-content-docs/current/general/how-vpn-works.md
index 0ed86b0ab..1fb8d531d 100644
--- a/i18n/ru/docusaurus-plugin-content-docs/current/general/how-vpn-works.md
+++ b/i18n/ru/docusaurus-plugin-content-docs/current/general/how-vpn-works.md
@@ -69,7 +69,7 @@ VPN создаёт туннель между вашим устройством 
 
 - [_Собственный VPN-протокол_](/general/adguard-vpn-protocol), который стабильно работает даже при медленном интернет-соединении и маскируется под обычный трафик, что затрудняет его отслеживание и блокировку
 
-- [_Политика отсутствия логов_](https://adguard-vpn.com/privacy.html), что означает, что никакие персональные данные не могут быть переданы третьим лицам, поскольку AdGuard VPN никогда не собирает такие данные
+- [_Политика без логов_](https://adguard-vpn.com/privacy.html), что означает, что никакие персональные данные не могут быть переданы третьим лицам, поскольку AdGuard VPN никогда не собирает такие данные
 
 - _Более 50 VPN-серверов в десятках стран_
 
diff --git a/i18n/ru/docusaurus-plugin-content-docs/current/general/vpn-issues.md b/i18n/ru/docusaurus-plugin-content-docs/current/general/vpn-issues.md
index 8d905f63e..6bf40167c 100644
--- a/i18n/ru/docusaurus-plugin-content-docs/current/general/vpn-issues.md
+++ b/i18n/ru/docusaurus-plugin-content-docs/current/general/vpn-issues.md
@@ -7,7 +7,7 @@ sidebar_position: 10
 
 ## Открыть сайт AdGuard VPN
 
-If adguard-vpn.com is not accessible, try using the [mirror website](https://adguardvpn-help.info/).
+Если adguard-vpn.com недоступен, попробуйте использовать [сайт-зеркало](https://adguardvpn-help.info/).
 
 :::info
 
@@ -25,15 +25,15 @@ If adguard-vpn.com is not accessible, try using the [mirror website](https://adg
 
 ### AdGuard VPN для Android
 
-If you experience problems with Google Play, download the APK file from [AdGuard VPN’s mirror website](https://adguardvpn-help.info/android/overview.html).
+Если у вас возникли проблемы с Google Play, скачайте APK-файл [с зеркального сайта AdGuard VPN](https://adguardvpn-help.info/android/overview.html).
 
 ### AdGuard VPN для Mac
 
-Download the installation file from [AdGuard VPN’s mirror website](https://adguardvpn-help.info/windows/overview.html).
+Загрузите установочный файл [с зеркального сайта AdGuard VPN](https://adguardvpn-help.info/windows/overview.html).
 
 ### AdGuard VPN для Windows
 
-Download the installation file from [AdGuard VPN’s mirror website](https://adguardvpn-help.info/mac/overview.html).
+Загрузите установочный файл [с зеркального сайта AdGuard VPN](https://adguardvpn-help.info/mac/overview.html).
 
 ## Что ещё может помочь
 
diff --git a/i18n/ru/docusaurus-plugin-content-docs/current/intro.md b/i18n/ru/docusaurus-plugin-content-docs/current/intro.md
index b1ddd7cac..4b1b4678a 100644
--- a/i18n/ru/docusaurus-plugin-content-docs/current/intro.md
+++ b/i18n/ru/docusaurus-plugin-content-docs/current/intro.md
@@ -34,9 +34,9 @@ VPN можно использовать, чтобы:
 
 Главное отличие AdGuard VPN от конкурентов в том, что мы используем [протокол собственнной разработки](/general/adguard-vpn-protocol). Он маскируется под обычный трафик, поэтому его гораздо сложнее отследить и заблокировать.
 
-### Политика отсутствия логов
+### Политика без логов
 
-Политика отсутствия логов означает, что мы не собираем и не храним личные данные пользователей, и тем более не передаём их третьим лицам. [Читать политику конфиденциальности AdGuard VPN](https://adguard-vpn.com/privacy.html)
+Политика без логов означает, что мы не собираем и не храним личные данные пользователей, и тем более не передаём их третьим лицам. [Читать политику конфиденциальности AdGuard VPN](https://adguard-vpn.com/privacy.html)
 
 ### Защита от отслеживания
 
diff --git a/i18n/sk/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/sk/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index 0cad3c0da..b0464ce56 100644
--- a/i18n/sk/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/sk/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## System requirements
 
-AdGuard VPN can only be installed on devices with **iOS 14.2 and iPadOS 14.2 or later**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### If AdGuard VPN has been removed from the App Store
 
diff --git a/i18n/sk/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/sk/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..92234acba 100644
--- a/i18n/sk/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/sk/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/sl/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/sl/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index 0cad3c0da..b0464ce56 100644
--- a/i18n/sl/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/sl/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## System requirements
 
-AdGuard VPN can only be installed on devices with **iOS 14.2 and iPadOS 14.2 or later**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### If AdGuard VPN has been removed from the App Store
 
diff --git a/i18n/sl/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/sl/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..92234acba 100644
--- a/i18n/sl/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/sl/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/sr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/sr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index 0cad3c0da..b0464ce56 100644
--- a/i18n/sr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/sr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## System requirements
 
-AdGuard VPN can only be installed on devices with **iOS 14.2 and iPadOS 14.2 or later**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### If AdGuard VPN has been removed from the App Store
 
diff --git a/i18n/sr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/sr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..92234acba 100644
--- a/i18n/sr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/sr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-android/overview.md b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-android/overview.md
index a4108b3cb..b7af8072d 100644
--- a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-android/overview.md
+++ b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-android/overview.md
@@ -45,7 +45,7 @@ You can add a domain (e.g., `google.com`) or subdomain (e.g., `*.google.com`) to
 
 Alan adlarını elle eklemenin bazı ince ayrıntıları vardır. Örneğin, `yahoo.com` alan adını elle hariç tutarsanız, tüm `*.yahoo.com` alt alanları da istisnalarda listelenir. Ancak, `yahoo.jp` veya `yahoo.fr` gibi diğer üst düzey alan adlarına sahip alan adları hariç tutulmayacaktır.
 
-If you add `youtube.com` to exclusions, the domain of the same service `youtu.be` won’t be added. Bu durumda, dahili hizmet listelerini kullanmak daha güvenlidir. Her platformla ilişkili tüm alt alan adlarını içerirler.
+`youtube.com` alan aıdnı istisnalara eklerseniz, aynı hizmetin `youtu.be` alan adı eklenmeyecektir. Bu durumda, dahili hizmet listelerini kullanmak daha güvenlidir. Her platformla ilişkili tüm alt alan adlarını içerirler.
 
 :::
 
diff --git a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-android/solving-problems/low-level-settings.md b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-android/solving-problems/low-level-settings.md
index 69501ecb9..ec488c36f 100644
--- a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-android/solving-problems/low-level-settings.md
+++ b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-android/solving-problems/low-level-settings.md
@@ -13,46 +13,46 @@ Changing _Low-level settings_ can cause problems with the performance of AdGuard
 
 To access _Low-level settings_, open the AdGuard VPN app and tap the gear icon in the lower right corner of the screen. Then choose _General_ → _Advanced_ → _Low-level settings_.
 
-## Low-level settings
+## Alt seviye ayarları
 
 Below we list all low-level settings available in AdGuard VPN for Android and explain what they do. We once again urge you not to mess with these settings blindly even if you’ve read this guide. Treat it as a cheat sheet for when you know what you are doing but want to brush up on specifics.
 
-### AdGuard VPN protocol
+### AdGuard VPN protokolü
 
-By default, AdGuard VPN protocol uses HTTP/2 transport protocol to avoid detection and to maintain high speed. You can read more about its implementation in a [dedicated article](/general/adguard-vpn-protocol.md).
+AdGuard VPN protokolü varsayılan olarak tespit edilmeyi önlemek ve yüksek hızı korumak için HTTP/2 aktarım protokolünü kullanır. You can read more about its implementation in a [dedicated article](/general/adguard-vpn-protocol.md).
 
-You can switch AdGuard VPN to use QUIC transport protocol instead. [QUIC](https://adguard-vpn.com/kb/general/why-adguard-vpn/#6-quic-support) is a relatively new protocol, hence it can be less stable. However, if your Internet connection is unstable (for example, when you connect to the public Wi-Fi), it provides better security and increases the connection speed thanks to the [Head-Of-Line Blocking](https://adguard-dns.io/en/blog/dns-over-quic.html#headoflineblocking) technology.
+You can switch AdGuard VPN to use QUIC transport protocol instead. [QUIC](https://adguard-vpn.com/kb/general/why-adguard-vpn/#6-quic-support) nispeten yeni bir protokoldür, bu nedenle daha az kararlı olabilir. However, if your Internet connection is unstable (for example, when you connect to the public Wi-Fi), it provides better security and increases the connection speed thanks to the [Head-Of-Line Blocking](https://adguard-dns.io/en/blog/dns-over-quic.html#headoflineblocking) technology.
 
 ### Include Wi-Fi gateway in VPN routes
 
 If this setting is enabled, the gateway IP addresses will be added to VPN routes when on Wi-Fi.
-If you disable it, then the route configuration (IP ranges that are filtered) will be changed. The Wi-Fi gateway of the network to which the user is connected will be excluded, and therefore, it will not be subject to filtering.
+Bunu devre dışı bırakırsanız, yönlendirme yapılandırması (filtrelenen IP aralıkları) değişecektir. The Wi-Fi gateway of the network to which the user is connected will be excluded, and therefore, it will not be subject to filtering.
 
 This setting is enabled by default.
 
-### Packet capture (PCAP)
+### Paket yakalama (PCAP)
 
 If this setting is enabled, AdGuard VPN will create a `.pcap` file with a timestamp for its name (for instance, `1682599851461.pcap`) in the app cache directory. This file lists all network packets transferred through the VPN and can be analyzed with the [Wireshark program](https://www.wireshark.org/).
 
-### Watchdog
+### Gözetleyici
 
-Watchdog monitors the VPN process state to check if there are any problems with it. When enabled, AdGuard VPN will protect itself against aggressive battery saver apps that could otherwise kill it.
+Gözetleyici, herhangi bir sorun olup olmadığını kontrol etmek için VPN işlem durumunu izler. When enabled, AdGuard VPN will protect itself against aggressive battery saver apps that could otherwise kill it.
 
-### Preferred IP version
+### Tercih edilen IP sürümü
 
-Here you can set up the endpoint addresses. There are three options: IPv4, IPv6 or IPv4 and IPv6 (if your device supports both).
+Burada uç nokta adreslerini ayarlayabilirsiniz. Üç seçenek vardır: IPv4, IPv6 veya IPv4 ve IPv6 (cihazınız her ikisini de destekliyorsa).
 
-### IPv4 ranges excluded from VPN
+### VPN'den hariç tutulan IPv4 aralıkları
 
 VPN tunneling for the IPv4 ranges listed in this section will be disabled.
 
-### IPv6 interface
+### IPv6 arayüzü
 
-After enabling this option you will have an IPv6 address while routing traffic through the VPN connection. You can set up the exclusions in the _IPv6 ranges excluded from VPN_.
+Bu seçeneği etkinleştirdikten sonra VPN bağlantısı üzerinden trafiği yönlendirirken bir IPv6 adresine sahip olacaksınız. You can set up the exclusions in the _IPv6 ranges excluded from VPN_.
 
-### IPv6 ranges excluded from VPN
+### VPN'den hariç tutulan IPv6 aralıkları
 
-VPN tunneling for the IPv6 ranges listed in this section will be disabled.
+Bu bölümde listelenen IPv6 aralıkları için VPN tünelleme devre dışı bırakılacaktır.
 
 :::note
 
@@ -60,15 +60,15 @@ You need to enable _IPv6 interface_ setting in _Low-level settings_ first, other
 
 :::
 
-### MTU (maximum transmission unit)
+### MTU (maksimum iletim birimi)
 
-Here you can set the maximum size (in bytes) of the data packet used in local VPN. The recommended range is 1500-9000 bytes.
+Burada yerel VPN'de kullanılan veri paketinin maksimum boyutunu (bayt cinsinden) ayarlayabilirsiniz. Önerilen aralık 1500-9000 bayttır.
 
-### Excluded apps
+### Hariç tutulan uygulamalar
 
-You can list here UIDs (unique identifiers) or package names of the apps that you want to exclude from VPN routing.
-Unlike with apps added to regular _Exclusions_, the traffic of apps added to _Excluded apps_ doesn’t go to the local VPN service on your device at all. Instead, it goes directly to the destination.
+VPN yönlendirmesinden hariç tutmak istediğiniz uygulamaların UID'lerini (benzersiz tanımlayıcılar) veya paket adlarını buraya listeleyebilirsiniz.
+Unlike with apps added to regular _Exclusions_, the traffic of apps added to _Excluded apps_ doesn’t go to the local VPN service on your device at all. Bunun yerine, doğrudan istikamete gider.
 
-### Proxy server port
+### Proxy sunucu bağlantı noktası
 
-Here you can set up the internal SOCKS5 proxy server port. The default option is 1080.
+Burada dahili SOCKS5 proxy sunucusunun portunu ayarlayabilirsiniz. Varsayılan seçenek 1080'dir.
diff --git a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index 93afe44f2..e52d27c8b 100644
--- a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## Sistem gereksinimleri
 
-AdGuard VPN, yalnızca **iOS 14.2 ve iPadOS 14.2 veya sonraki sürümlere** sahip cihazlara yüklenebilir.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### If AdGuard VPN has been removed from the App Store
 
diff --git a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/solving-problems/app-store.md b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/solving-problems/app-store.md
index 6c32f323f..edc2966e0 100644
--- a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/solving-problems/app-store.md
+++ b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/solving-problems/app-store.md
@@ -17,7 +17,7 @@ Bazı ülkelerde AdGuard VPN, App Store'da mevcut değildir. Durumunuz buysa uyg
 
    ![Bölge değiştiriliyor](https://cdn.adtidy.org/content/kb/vpn/ios/app_store/changing_country.png)
 
-3. Select your preferred country from the list (e.g., _United States_) and agree to the Terms and Conditions.
+3. Listeden tercih ettiğiniz ülkeyi seçin (örneğin, _Amerika Birleşik Devletleri_), Şartlar ve Koşulları kabul edin.
 
 4. Gerekli alanları doldurun. Örneğin, _Ödeme Yöntemi_ için _Hiçbiri_ öğesini seçebilir ve _Fatura Adresi_ için geçerli bir posta koduna sahip herhangi bir adresi kullanabilirsiniz:
 
@@ -39,31 +39,31 @@ Bölgeyi değiştirdikten sonra, [AdGuard VPN'i App Store'dan tekrar indirmeyi](
 
 ### Yeni bir Apple hesabı oluşturma ve hesabı App Store'a bağlama
 
-App Store'da ücretli abonelikleri olan ve yalnızca farklı bölgelerden ücretsiz uygulamalar indirmesi gereken kullanıcılar için başka bir ülkede yeni bir hesap oluşturmak daha uygun bir seçenektir. This way, you can use your primary account at the system level on your phone and activate the second account solely for the App Store without needing to log out of your iPhone account.
+App Store'da ücretli abonelikleri olan ve yalnızca farklı bölgelerden ücretsiz uygulamalar indirmesi gereken kullanıcılar için başka bir ülkede yeni bir hesap oluşturmak daha uygun bir seçenektir. Bu şekilde, birincil hesabınızı telefonunuzda sistem düzeyinde kullanabilir ve iPhone hesabınızdan çıkış yapmanıza gerek kalmadan ikinci hesabı yalnızca App Store için etkinleştirebilirsiniz.
 
-**Steps to create a new account in a different country:**
+**Farklı bir ülkede yeni bir hesap oluşturma adımları:**
 
-1. Visit [https://appleid.apple.com/account](https://appleid.apple.com/account).
+1. [https://appleid.apple.com/account](https://appleid.apple.com/account) adresini ziyaret edin.
 
-2. Enter any first and last name and select a country, like _United States of America_.
+2. Herhangi bir ad ve soyadı girin ve _Amerika Birleşik Devletleri_ gibi bir ülke seçin.
 
-3. Use an email address not linked to your Apple ID. A verification code will be sent to this email.
+3. Apple Kimliğinize bağlı olmayan bir e-posta adresi kullanın. Bu e-postaya bir doğrulama kodu gönderilecektir.
 
-4. Provide a phone number for verification.
+4. Doğrulama için bir telefon numarası verin.
 
-5. Confirm your email and phone number and press _Next_. Bu kadar!
+5. E-posta adresinizi ve telefon numaranızı doğrulayın ve _Sonraki_ öğesine basın. Bu kadar!
 
-Now **link your new account to the App Store**:
+Şimdi **yeni hesabınızı App Store'a bağlayın**:
 
-1. Go to _Settings_ and tap your name.
+1. _Ayarlar_ öğesine gidin ve adınıza dokunun.
 
-2. Select _Media & Purchases_ → _Sign Out_. This will only sign you out of the App Store while keeping you signed in with your Apple ID on your phone.
+2. _Ortamlar ve Satın Almalar_ → _Çıkış Yap_ öğesini seçin. Bu, telefonunuzda Apple Kimliğinizle oturumunuzu açık tutarken yalnızca App Store'dan çıkış yapmanızı sağlar.
 
 3. Tap on _Media & Purchases_ again and select _Not [your name]?_ You will be prompted to sign in with a different Apple ID.
 
    ![Changing account](https://cdn.adtidy.org/content/kb/vpn/ios/app_store/log_out.png)
 
-4. Enter the email address and password for your new account.
+4. Yeni hesabınızın e-posta adresini ve parolasını girin.
 
    ![Login \*mobile\_border](https://cdn.adtidy.org/content/kb/vpn/ios/app_store/apple_id.png)
 
diff --git a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/adguard-vpn-for-linux.md b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/adguard-vpn-for-linux.md
index d65b2b1c5..d5a33f27f 100644
--- a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/adguard-vpn-for-linux.md
+++ b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/adguard-vpn-for-linux.md
@@ -9,7 +9,7 @@ Aşağıda giriş yapmak, bağlanmak ve AdGuard VPN'in ayarlarını yönetmek i
 
 - [Kurulum ve kaldırma](/adguard-vpn-for-linux/installation)
 - [Giriş yapma, bağlantı kurma ve güncelleme](/adguard-vpn-for-linux/login)
-- [Setting up on a router](/adguard-vpn-for-linux/setting-up-on-a-router)
+- [Yönlendiriciye kurulum](/adguard-vpn-for-linux/setting-up-on-a-router)
 - [Ayarlar](/adguard-vpn-for-linux/settings)
 - [Geri bildirim gönderme](/adguard-vpn-for-linux/feedback)
 
diff --git a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index 7e5e59426..8afe4aa2c 100644
--- a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -1,19 +1,19 @@
 ---
-title: How to set up AdGuard VPN for Linux on an Asuswrt-Merlin router
+title: Asuswrt-Merlin yönlendiricide Linux için AdGuard VPN nasıl kurulur
 sidebar_position: 4
 ---
 
-:::info System requirements
+:::info Sistem gereksinimleri
 
 1. AdGuard VPN CLI requires at least 22 MB of free storage space on your router’s disk or external USB after installing necessary packages.
-2. **Asuswrt-Merlin firmware**: Make sure your router is running the Asuswrt-Merlin firmware.
+2. **Asuswrt-Merlin donanım yazılımı**: Yönlendiricinizin Asuswrt-Merlin donanım yazılımını çalıştırdığından emin olun.
 3. **USB drive**: A USB drive formatted in a native Linux file system (ext2, ext3, or ext4). We will go through the formatting process in this guide.
 
 :::
 
 ## 1. Determine your router’s IP address
 
-The default IP address for most routers is `192.168.1.1` or `192.168.0.1`. If you’ve changed the IP address or if you’re unsure, you can find it by checking the IP configuration on a connected device.
+Çoğu yönlendirici için varsayılan IP adresi `192.168.1.1` veya `192.168.0.1`dir. If you’ve changed the IP address or if you’re unsure, you can find it by checking the IP configuration on a connected device.
 
 ### On Windows
 
@@ -91,18 +91,18 @@ You’ll need an SSH client. Most Linux and macOS systems come with an SSH clien
 2. PuTTY'yi açın.
 3. In the _Host Name (or IP address)_ field, enter your router’s IP address (e.g., `192.168.1.1`).
 4. Make sure the _Connection type_ is set to SSH.
-5. Click _Open_.
-6. When the Terminal window opens, enter the router’s credentials. The SSH login username and password are the same as the admin credentials.
+5. _Aç_ öğesine tıklayın.
+6. Terminal penceresi açıldığında, yönlendiricinin kimlik bilgilerini girin. The SSH login username and password are the same as the admin credentials.
 
 ## 4) Install Entware using SSH
 
-Once logged into your SSH client, you can use various commands to interact with your router’s Linux-based operating system. To proceed, you will need to install Entware OPKG Manager. It allows you to install third-party software packages to expand router capabilities. Skip to the next step if you already have it installed.
+Once logged into your SSH client, you can use various commands to interact with your router’s Linux-based operating system. To proceed, you will need to install Entware OPKG Manager. Yönlendirici yeteneklerini genişletmek için üçüncü taraf yazılım paketleri yüklemenize olanak tanır. Skip to the next step if you already have it installed.
 
 Note that you cannot use both Optware (outdated alternative) and Entware at the same time.
 
-The Asus DownloadMaster is based on Optware, and therefore is not compatible with Entware. You will have to uninstall DownloadMaster and look at the alternatives provided by Entware.
+Asus DownloadMaster, Optware tabanlıdır ve bu nedenle Entware ile uyumlu değildir. DownloadMaster'ı kaldırmanız ve Entware tarafından sağlanan alternatiflere bakmanız gerekecektir.
 
-After uninstalling, make sure that "asusware.arm" or "asusware.\*" dir on the mounted disk partition is deleted. Otherwise, Entware won't work properly. After uninstalling DownloadMaster, make sure the router is rebooted.
+After uninstalling, make sure that "asusware.arm" or "asusware.\*" dir on the mounted disk partition is deleted. Aksi takdirde, Entware düzgün çalışmaz. DownloadMaster'ı kaldırdıktan sonra yönlendiricinin yeniden başlatıldığından emin olun.
 
 You will need to plug a USB disk that's formatted in a native Linux file system (ext2, ext3 or ext4). Bir diski biçimlendirmek için amtm kullanın. Plug a USB disk into your router, then start amtm with:
 
@@ -140,11 +140,11 @@ If the entware-setup.sh script is not found, download and run the following scri
 wget -O - http://bin.entware.net/armv7sf-k3.2/installer/generic.sh | sh
 ```
 
-Exit amtm by pressing `e`.
+`e` tuşuna basarak amtm'den çıkın.
 
 ## 5. Install AdGuard VPN CLI
 
-Update the package lists:
+Paket listelerini güncelleyin:
 
 ```bash
 opkg update
@@ -190,35 +190,35 @@ modprobe tun
    adguardvpn-cli login
    ```
 
-2. Connect to VPN
+2. VPN'e bağlanın
 
-   Select a VPN server location that best suits your needs.
+   İhtiyaçlarınıza en uygun VPN sunucu konumunu seçin.
 
-   In general, the closer the server, the faster the connection.
+   Genel olarak, sunucu size ne kadar yakınsa bağlantı o kadar hızlı olur.
 
-   To view available locations, type:
+   Mevcut konumları görüntülemek için şunu yazın:
 
    ```jsx
    adguardvpn-cli list-locations
    ```
 
-   To connect to a specific location, type:
+   Belirli bir konuma bağlanmak için şunu yazın:
 
    ```jsx
-   adguardvpn-cli connect -l LOCATION_NAME
+   adguardvpn-cli connect -l LOCATION_NAME
    ```
 
-   Replace LOCATION_NAME with the city, country, or ISO code of the location you want to connect to.
+   LOCATION_NAME yerine bağlanmak istediğiniz konumun şehri, ülkesi veya ISO koduyla değiştirin.
 
-   For quick connect, type:
+   Hızlı bağlantı için şunu yazın:
 
    ```jsx
    adguardvpn-cli connect
    ```
 
-   AdGuard VPN will choose the fastest available location and remember it for future quick connections.
+   AdGuard VPN, mevcut en hızlı konumu seçer ve gelecekteki hızlı bağlantılar için bunu hatırlar.
 
-   Enter `yes` when asked “Would you like to set default routes in TUN mode?”
+   "TUN modunda varsayılan yönlendirmeleri ayarlamak ister misiniz?" diye sorulduğunda `evet` girin
 
    AdGuard VPN CLI will create a tun0 interface for VPN tunneling.
 
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/keenetic.md b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/keenetic.md
index f4b0170c5..b6f93eb01 100644
--- a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/keenetic.md
+++ b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/keenetic.md
@@ -1,5 +1,5 @@
 ---
-title: How to set up AdGuard VPN for Linux on a Keenetic router
+title: Keenetic yönlendiricide Linux için AdGuard VPN nasıl kurulur
 sidebar_position: 2
 ---
 
@@ -55,9 +55,9 @@ You’ll need an SSH client. Most Linux and macOS systems come with an SSH clien
 
 ### Built-in SSH client (Linux, macOS, and Windows 10/11)
 
-1. Open Terminal or PowerShell.
+1. Terminal veya PowerShell'i açın.
 
-2. Run the SSH command:
+2. SSH komutunu çalıştırın:
 
    ```bash
    ssh admin@192.168.1.1
@@ -73,7 +73,7 @@ You’ll need an SSH client. Most Linux and macOS systems come with an SSH clien
    Are you sure you want to continue connecting (yes/no/[fingerprint])?
    ```
 
-   Type `yes` and press Enter.
+   `Evet` yazın ve Enter tuşuna basın.
 
 4. Enter the router’s password when prompted. The default username is `root` and the default password is `keenetic`.
 
@@ -81,13 +81,13 @@ You’ll need an SSH client. Most Linux and macOS systems come with an SSH clien
 
 1. Download and install PuTTY from [the official website](https://www.putty.org/).
 
-2. Open PuTTY.
+2. PuTTY'yi açın.
 
 3. In the _Host Name (or IP address)_ field, enter your router’s IP address (e.g., `192.168.1.1`)
 
 4. Ensure the _Connection type_ is set to SSH.
 
-5. Click _Open_.
+5. _Aç_ öğesine tıklayın.
 
 6. When the Terminal window opens, log in. The default username is `root` and the default password is `keenetic`.
 
@@ -191,36 +191,36 @@ ln -s /opt/adguardvpn_cli/adguardvpn-cli /opt/bin
    To connect to a specific location, type:
 
    ```bash
-   adguardvpn-cli connect -l LOCATION_NAME
+   adguardvpn-cli connect -l LOCATION_NAME
    ```
 
-   Replace `LOCATION_NAME` with the city, country, or ISO code of the location you want to connect to.
+   `LOCATION_NAME` yerine bağlanmak istediğiniz konumun şehri, ülkesi veya ISO koduyla değiştirin.
 
-   For quick connect, type:
+   Hızlı bağlantı için şunu yazın:
 
    ```bash
    adguardvpn-cli connect
    ```
 
-   AdGuard VPN will choose the location with the lowest ping and remember it for future quick connections.
+   AdGuard VPN en düşük ping değerine sahip konumu seçer ve gelecekteki hızlı bağlantılar için bunu hatırlar.
 
-3. Adjust your settings
+3. Ayarlarınızı düzenleyin
 
-   Get a list of all available AdGuard VPN commands and customize the VPN client to your needs.
+   Mevcut tüm AdGuard VPN komutlarının bir listesini alın ve VPN istemcisini ihtiyaçlarınıza göre özelleştirin.
 
-   To view all commands, type:
+   Tüm komutları görüntülemek için şunu yazın:
 
    ```bash
    adguardvpn-cli --help-all
    ```
 
-4. Enter `yes` when asked “Would you like to set default routes in TUN mode?”
+4. "TUN modunda varsayılan yönlendirmeleri ayarlamak ister misiniz?" diye sorulduğunda `evet` girin
 
 AdGuard VPN CLI will create a tun0 interface for VPN tunneling
 
 ## 7. Set up firewall rules
 
-This step is designed to configure firewall rules on a Keenetic router to route traffic through AdGuard VPN.
+Bu adım, trafiği AdGuard VPN üzerinden yönlendirmek için Keenetic yönlendiricide güvenlik duvarı kurallarını yapılandırmak için tasarlanmıştır.
 
 1. **Install `iptables` by running this command via SSH:**
 
@@ -228,7 +228,7 @@ This step is designed to configure firewall rules on a Keenetic router to route
    opkg install iptables
    ```
 
-   This line installs the `iptables` package, which is a tool for managing network packet filtering rules on Linux systems.
+   Bu satır, Linux sistemlerinde ağ paket filtreleme kurallarını yönetmek için bir araç olan `iptables` paketini yükler.
 
 2. **Create a new shell script by running the following command:**
 
@@ -247,23 +247,23 @@ This step is designed to configure firewall rules on a Keenetic router to route
    EOF
    ```
 
-   And make it executable:
+   Ve çalıştırılabilir hâle getirin:
 
    ```bash
    chmod +x /opt/etc/ndm/netfilter.d/001-adguardvpn.sh
    ```
 
-   If you have more brX interfaces, make sure to include them in the script as well to route their traffic. Alternatively, make sure to specify a different routing rule for those interfaces.
+   Eğer daha fazla brX arayüzünüz varsa, trafiği yönlendirmek için onları da betiğe dâhil ettiğinizden emin olun. Alternatif olarak, bu arayüzler için farklı bir yönlendirme kuralı belirttiğinizden emin olun.
 
 This will create a new shell script named `001-adguardvpn.sh` in the `/opt/etc/ndm/netfilter.d/` directory, which is where network-related scripts are typically stored on a Keenetic router.
 
-The script creates a custom firewall rule to ensure that traffic from your LAN (`br0`) is routed through the AdGuard VPN interface (`tun0`). It first cleans up any previous rules related to this configuration, then sets up new rules to direct the traffic appropriately.
+Betik, LAN'ınızdan (`br0`) gelen trafiğin AdGuard VPN arayüzü (`tun0`) üzerinden yönlendirilmesini sağlamak için özel bir güvenlik duvarı kuralı oluşturur. Öncelikle bu yapılandırmayla ilgili önceki kuralları temizler, ardından trafiği uygun şekilde yönlendirecek yeni kurallar oluşturur.
 
 ## 8. Set up automatic launch for AdGuard VPN CLI
 
 The following script is designed to automatically establish a VPN connection using AdGuard VPN on your Keenetic router when the WAN interface becomes available (e.g., after a reboot or reconnecting to the Internet).
 
-Run the following command:
+Aşağıdaki komutu çalıştırın:
 
 ```bash
 cat << E0F > /opt/etc/ndm/wan.d/001-adguardvpn.sh
@@ -275,16 +275,16 @@ exit 0
 E0F
 ```
 
-And make it executable:
+Ve çalıştırılabilir hâle getirin:
 
 ```bash
 chmod +x /opt/etc/ndm/wan.d/001-adguardvpn.sh
 ```
 
-The script named `001-adguardvpn.sh` will be saved to `/opt/etc/ndm/wan.d/`.
+`001-adguardvpn.sh` adlı betik `/opt/etc/ndm/wan.d/` dosyasına kaydedilecektir.
 
-It will start AdGuard VPN when Internet is connected.
+İnternete bağlanıldığında AdGuard VPN'i başlatır.
 
-Reboot your router to finish setup.
+Kurulumu tamamlamak için yönlendiricinizi yeniden başlatın.
 
-Congrats! Now you have a router secured with AdGuard VPN.
+Tebrikler! Artık AdGuard VPN ile güvence altına alınmış bir yönlendiriciniz var.
diff --git a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/openwrt.md b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/openwrt.md
index 93e68e609..a593bc3d4 100644
--- a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/openwrt.md
+++ b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/openwrt.md
@@ -1,5 +1,5 @@
 ---
-title: How to set up AdGuard VPN for Linux on an OpenWRT router
+title: OpenWRT yönlendiricide Linux için AdGuard VPN nasıl kurulur
 sidebar_position: 3
 ---
 
@@ -59,9 +59,9 @@ Most Linux and macOS systems come with an SSH client pre-installed. For Windows,
 
 ### Built-in SSH client (Linux, macOS, and Windows 10/11)
 
-1. Open Terminal or PowerShell.
+1. Terminal veya PowerShell'i açın.
 
-2. Run the SSH command:
+2. SSH komutunu çalıştırın:
 
    ```text
    ssh root@192.168.1.1
@@ -77,7 +77,7 @@ Most Linux and macOS systems come with an SSH client pre-installed. For Windows,
    Are you sure you want to continue connecting? (Yes/No/[Fingerprint])
    ```
 
-   Type `Yes` and press Enter.
+   `Evet` yazın ve Enter tuşuna basın.
 
 4. Enter the router’s password when prompted. The default password for OpenWrt is typically empty (just press Enter), but you should have set a password during the initial setup.
 
@@ -99,7 +99,7 @@ Most Linux and macOS systems come with an SSH client pre-installed. For Windows,
 
 Once logged in, you can use various commands to interact with your router’s Linux-based operating system.
 
-Update package lists (OpenWrt):
+Paket listelerini güncelleyin (OpenWrt):
 
 ```text
 opkg update
@@ -123,7 +123,7 @@ curl -fsSL https://raw.githubusercontent.com/AdguardTeam/AdGuardVPNCLI/master/sc
 
    Linux için AdGuard VPN'i kullanmak için bir AdGuard hesabına ihtiyacınız vardır.
 
-   You can sign up or log in on our [website](https://auth.adguard.com/login.html) or in the Terminal.
+   [Sitemizden](https://auth.adguard.com/login.html) veya Terminal'den kaydolabilir veya giriş yapabilirsiniz.
 
    Kaydolmak veya giriş yapmak için şunu yazın:
 
@@ -131,13 +131,13 @@ curl -fsSL https://raw.githubusercontent.com/AdguardTeam/AdGuardVPNCLI/master/sc
    adguardvpn-cli login
    ```
 
-   Note: If failed to link the binary to '/usr/local/bin’, use full file path to run all commands. For example, `/opt/adguardvpn_cli/adguardvpn-cli login`
+   Note: If failed to link the binary to '/usr/local/bin’, use full file path to run all commands. Örneğin, `/opt/adguardvpn_cli/adguardvpn-cli login`
 
-2. Connect to VPN
+2. VPN'e bağlanın
 
-   Select a VPN server location that best suits your needs.
+   İhtiyaçlarınıza en uygun VPN sunucu konumunu seçin.
 
-   In general, the closer the server is to you, the faster the connection.
+   Genel olarak, sunucu size ne kadar yakınsa bağlantı o kadar hızlı olur.
 
    Mevcut konumları görüntülemek için şunu yazın:
 
@@ -199,7 +199,7 @@ Bunu web arayüzünden veya komut satırından yapabilirsiniz. Steps below descr
    uci show firewall
    ```
 
-   This will show a config file with all zones listed. Look for a section like `firewall.@zone[1]` or similar where `option name 'wan'` is defined. The number `[1]` could be different depending on your configuration.
+   Bu, tüm bölgelerin listelendiği bir yapılandırma dosyası gönderir. Look for a section like `firewall.@zone[1]` or similar where `option name 'wan'` is defined. Yapılandırmanıza bağlı olarak `[1]` sayısı farklı olabilir.
 
    Run this SSH command, replace `zone[1]` with correct  ‘wan’ zone identified before:
 
@@ -210,7 +210,7 @@ Bunu web arayüzünden veya komut satırından yapabilirsiniz. Steps below descr
    /etc/init.d/firewall reload
    ```
 
-   If you want to disable all traffic that is not protected by VPN, run the following command. This way you won’t have an Internet connection at all if VPN disconnects. If you choose not to do this step, your real IP will be exposed if the VPN disconnects.
+   VPN tarafından korunmayan tüm trafiği devre dışı bırakmak istiyorsanız, aşağıdaki komutu çalıştırın. This way you won’t have an Internet connection at all if VPN disconnects. If you choose not to do this step, your real IP will be exposed if the VPN disconnects.
 
    ```shell
    uci del_list firewall.@zone[1].network='wan'
@@ -251,7 +251,7 @@ stop() {
 }
 ```
 
-Run this to grant access to and enable auto-launch:
+Otomatik başlatmaya erişim izni vermek ve etkinleştirmek için şunu çalıştırın:
 
 ```jsc
  chmod +x /etc/init.d/adguardvpn
diff --git a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/setting-up-on-a-router.md b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/setting-up-on-a-router.md
index e69a8ef43..de318863c 100644
--- a/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/setting-up-on-a-router.md
+++ b/i18n/tr/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/setting-up-on-a-router.md
@@ -1,5 +1,5 @@
 ---
-title: Setting up on a router
+title: Yönlendiriciye kurulum
 sidebar_position: 1
 ---
 
diff --git a/i18n/tr/docusaurus-plugin-content-docs/current/general/set-up-adguard-vpn-on-your-router.md b/i18n/tr/docusaurus-plugin-content-docs/current/general/set-up-adguard-vpn-on-your-router.md
index e763d24ae..7ea54b3d1 100644
--- a/i18n/tr/docusaurus-plugin-content-docs/current/general/set-up-adguard-vpn-on-your-router.md
+++ b/i18n/tr/docusaurus-plugin-content-docs/current/general/set-up-adguard-vpn-on-your-router.md
@@ -61,9 +61,9 @@ VPN sunucu konumunu değiştirmek istiyorsanız yönlendirici ayarlarınızı g
 
 - **Chromecast**:
 
-  **For Gen 4:** Simply download and install [AdGuard VPN from Google Play](https://play.google.com/store/apps/details?id=com.adguard.vpn)
+  **4. Nesil için:** [AdGuard VPN'i Google Play'den](https://play.google.com/store/apps/details?id=com.adguard.vpn) indirip kurmanız yeterlidir
 
-  **For Gen 3:** Follow our guide to [set up AdGuard VPN on your router](#how-to-set-up-adguard-vpn-on-your-router). TV'nizin ve akıllı telefon, tablet veya bilgisayarınızın aynı ağa bağlı olduğundan emin olun
+  **3. Nesil İçin:** [Yönlendiricinizde AdGuard VPN'i kurmak](#how-to-set-up-adguard-vpn-on-your-router) için kılavuzumuzu izleyin. TV'nizin ve akıllı telefon, tablet veya bilgisayarınızın aynı ağa bağlı olduğundan emin olun
 
   **Android TV** için AdGuard VPN'i bir yönlendiriciye kurmanıza gerek yoktur — Android TV için özel bir sürümümüz var. Sadece şu adımları izleyin:
 
diff --git a/i18n/tr/docusaurus-plugin-content-docs/current/general/vpn-issues.md b/i18n/tr/docusaurus-plugin-content-docs/current/general/vpn-issues.md
index 7115da82d..37dc22ce9 100644
--- a/i18n/tr/docusaurus-plugin-content-docs/current/general/vpn-issues.md
+++ b/i18n/tr/docusaurus-plugin-content-docs/current/general/vpn-issues.md
@@ -29,11 +29,11 @@ If you experience problems with Google Play, download the APK file from [AdGuard
 
 ### Mac için AdGuard VPN
 
-Download the installation file from [AdGuard VPN’s mirror website](https://adguardvpn-help.info/windows/overview.html).
+Kurulum dosyasını [AdGuard VPN'in yansıtma sitesinden](https://adguardvpn-help.info/windows/overview.html) indirin.
 
 ### Windows için AdGuard VPN
 
-Download the installation file from [AdGuard VPN’s mirror website](https://adguardvpn-help.info/mac/overview.html).
+Kurulum dosyasını [AdGuard VPN'in yansıtma sitesinden](https://adguardvpn-help.info/mac/overview.html) indirin.
 
 ## Diğer faydalı ipuçları
 
diff --git a/i18n/vi/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/vi/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index 9a75272e6..a04e33849 100644
--- a/i18n/vi/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/vi/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## System requirements
 
-AdGuard VPN chỉ có thể được cài đặt trên các thiết bị có **iOS 14.2 và iPadOS 14.2 hoặc phiên bản mới hơn**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### If AdGuard VPN has been removed from the App Store
 
diff --git a/i18n/vi/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/vi/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..92234acba 100644
--- a/i18n/vi/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/vi/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/zh-CN/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/zh-CN/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index 3ce5995f6..fa112f85f 100644
--- a/i18n/zh-CN/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/zh-CN/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## 系统要求
 
-AdGuard VPN can only be installed on devices with **iOS 14.2 and iPadOS 14.2 or later**.
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### If AdGuard VPN has been removed from the App Store
 
diff --git a/i18n/zh-CN/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/zh-CN/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..92234acba 100644
--- a/i18n/zh-CN/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/zh-CN/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```
diff --git a/i18n/zh-TW/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md b/i18n/zh-TW/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
index cf390ed0a..4a593c5a3 100644
--- a/i18n/zh-TW/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
+++ b/i18n/zh-TW/docusaurus-plugin-content-docs/current/adguard-vpn-for-ios/installation.md
@@ -5,7 +5,7 @@ sidebar_position: 2
 
 ## 系統需求
 
-AdGuard VPN 只能安裝在裝有 **iOS 14.2 和 iPadOS 14.2 或更高版本**的裝置上。
+AdGuard VPN can only be installed on devices with **iOS 15.4 and iPadOS 15.4 or later**.
 
 ### If AdGuard VPN has been removed from the App Store
 
diff --git a/i18n/zh-TW/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md b/i18n/zh-TW/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
index b1819fff9..92234acba 100644
--- a/i18n/zh-TW/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
+++ b/i18n/zh-TW/docusaurus-plugin-content-docs/current/adguard-vpn-for-linux/setting-up-on-a-router/asuswrt-merlin.md
@@ -243,19 +243,19 @@ This step configures firewall rules on an Asuswrt-Merlin router to route traffic
    #!/bin/sh
 
    if [ "$2" = "connected" ]; then
-   export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
-   export HOME=/opt/home/admin
-   modprobe tun
-   /opt/adguardvpn_cli/adguardvpn-cli connect &
-   for ipt in iptables ip6tables; do
-       $ipt -D FORWARD -j ADGUARD_FORWARD || true
-       $ipt -F ADGUARD_FORWARD || true
-       $ipt -X ADGUARD_FORWARD || true
-       $ipt -N ADGUARD_FORWARD
-       $ipt -I FORWARD -j ADGUARD_FORWARD
-       $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
-   done
-   exit 0
+       export SSL_CERT_FILE=/opt/etc/ssl/certs/ca-certificates.crt
+       export HOME=/opt/home/admin
+       modprobe tun
+       /opt/adguardvpn_cli/adguardvpn-cli connect &
+       for ipt in iptables ip6tables; do
+           $ipt -D FORWARD -j ADGUARD_FORWARD || true
+           $ipt -F ADGUARD_FORWARD || true
+           $ipt -X ADGUARD_FORWARD || true
+           $ipt -N ADGUARD_FORWARD
+           $ipt -I FORWARD -j ADGUARD_FORWARD
+           $ipt -A ADGUARD_FORWARD -i br0 -o tun0 -j ACCEPT
+       done
+       exit 0
    fi
    EOF
    ```