README.md

🔥 $\textbf{Heat-PINN}$ 🔥

A Physics-Informed Neural Network, to solve 2D steady-state heat equation based on the methodology introduced in: Physics Informed Deep Learning (Part I): Data-driven Solutions of Nonlinear Partial Differential Equations

Table of Contents

• Introduction
• Results

Introduction

In this project, a PINN is trained to solve a 2D heat equation and the final results is compared to a solution based on FDM method. For more detailts about the project read this.

Problem

The governing equation:

$$ \Theta = \frac{T - T_{\textbf{min}}}{T_{\textbf{max}}-T_{\textbf{min}}} $$

$$ \nabla^2{\Theta} = (\partial_{xx}+\partial_{yy})\Theta=0 $$

in the following domain:

$$ D = \{ (x, y)|-1\le x \le +1 \land -1\le y \le +1 \} $$

With the following boundary conditions:

$$ \begin{equation} \begin{cases} T(-1, y) = 75.0 \degree{C}\\ T(+1, y) = 0.0 \degree{C}\\ T(x, -1) = 50.0 \degree{C}\\ T(x, +1) = 0.0 \degree{C}\\ \end{cases} \end{equation} $$

When normalized:

$$ \begin{equation} \begin{cases} \Theta(-1, y) = 1\\ \Theta(+1, y) = 0\\ \Theta(x, -1) = \frac{2}{3}\\ \Theta(x, +1) = 0\\ \end{cases} \end{equation} $$

Results

Square geometry

Temperature profiles:

Doughnut geometry

Performance Comparison

Results obtained from a 9 layered DNN (1000 epochs) and FDM code on a 100×100 grid. The FDM code is written in Python.

Method	Computation time (s)
PINN	66.35
FDM	77.60

Note

This implementation is based on Tensorflow 2.0 package and made possible by Google Colabratory GPU.